McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 27

Question 260

After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. What control should the team keep after the corrective change has passed testing?

  1. Run automated port-reachability validation after network refreshes.
  2. Include all failover target VLANs in network cutover acceptance.
  3. Track LIFs persistently off-home and review auto-revert policy after maintenance.
  4. Include intercluster traffic in network firewall and route change impact reviews.

Explanation

Correct Answer

D:

Include intercluster traffic in network firewall and route change impact reviews. This addresses the recurring cause: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. It keeps the accepted correction in place: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes.

Other Answers

A:

Run automated port-reachability validation after network refreshes. This safeguard targets a different repeat failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. For the present risk, the necessary control is: Include intercluster traffic in network firewall and route change impact reviews.

B:

Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Include intercluster traffic in network firewall and route change impact reviews.

C:

Track LIFs persistently off-home and review auto-revert policy after maintenance. This safeguard targets a different repeat failure: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. For the present risk, the necessary control is: Include intercluster traffic in network firewall and route change impact reviews.

Question 261

A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. Which change most directly meets the stated storage requirement?

  1. Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions.
  2. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.
  3. Inspect and repair broadcast-domain membership and port reachability for the affected VLAN.
  4. Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.

Explanation

Correct Answer

A:

Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions. Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs. Acceptance requires: Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.

Other Answers

B:

Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. This responds to another troubleshooting network components issue: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Its mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The present case instead requires: Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions.

C:

Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. This responds to another troubleshooting network components issue: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Its mechanism is: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. The present case instead requires: Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions.

D:

Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size. This responds to another troubleshooting network components issue: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Its mechanism is: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. The present case instead requires: Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions.

Question 262

A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. Why would the proposed setup fail to provide the stated behavior?

  1. Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs.
  2. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.
  3. An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain.
  4. A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.

Explanation

Correct Answer

A:

Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs. The corrective design is: Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions. A relevant test is: Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.

Other Answers

B:

LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. That mechanism fits a different troubleshooting network components failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Here the decisive mechanism is: Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs.

C:

An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs.

D:

A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. That mechanism fits a different troubleshooting network components failure: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Here the decisive mechanism is: Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs.

Question 263

A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. Which result should be required before the storage change is accepted?

  1. Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.
  2. Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction.
  3. Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.
  4. Inspect each expected iSCSI session and host path state while testing the relevant subnet.

Explanation

Correct Answer

C:

Reproduce one link outage and capture the affected LIF's port and client TCP connectivity. This checks whether the remediation works: Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions. The governing behavior is: Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs.

Other Answers

A:

Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. That check tests the separate condition: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. It would not establish the required result here: Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.

B:

Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. That check tests the separate condition: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. It would not establish the required result here: Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.

D:

Inspect each expected iSCSI session and host path state while testing the relevant subnet. That check tests the separate condition: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. It would not establish the required result here: Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.

Question 264

A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. Which durable operational control best prevents this issue from recurring?

  1. Include all failover target VLANs in network cutover acceptance.
  2. Run automated port-reachability validation after network refreshes.
  3. Maintain physical and logical interface telemetry with time-synchronized alerts.
  4. Baseline host-to-target path connectivity for every SAN network change.

Explanation

Correct Answer

C:

Maintain physical and logical interface telemetry with time-synchronized alerts. This addresses the recurring cause: Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs. It keeps the accepted correction in place: Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions.

Other Answers

A:

Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Maintain physical and logical interface telemetry with time-synchronized alerts.

B:

Run automated port-reachability validation after network refreshes. This safeguard targets a different repeat failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. For the present risk, the necessary control is: Maintain physical and logical interface telemetry with time-synchronized alerts.

D:

Baseline host-to-target path connectivity for every SAN network change. This safeguard targets a different repeat failure: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. For the present risk, the necessary control is: Maintain physical and logical interface telemetry with time-synchronized alerts.

Question 265

A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. What should the administrator implement first to address the underlying gap?

  1. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.
  2. Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.
  3. Inspect intercluster LIF connectivity and the replication network's permitted ports/routes.
  4. Update the incorrect SVM static route after validating the new gateway and destination network.

Explanation

Correct Answer

D:

Update the incorrect SVM static route after validating the new gateway and destination network. A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. Acceptance requires: Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction.

Other Answers

A:

Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. This responds to another troubleshooting network components issue: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Its mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The present case instead requires: Update the incorrect SVM static route after validating the new gateway and destination network.

B:

Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size. This responds to another troubleshooting network components issue: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Its mechanism is: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. The present case instead requires: Update the incorrect SVM static route after validating the new gateway and destination network.

C:

Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. This responds to another troubleshooting network components issue: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Its mechanism is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. The present case instead requires: Update the incorrect SVM static route after validating the new gateway and destination network.

Question 266

A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. Which storage-system mechanism is the decisive factor in this situation?

  1. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.
  2. A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.
  3. A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it.
  4. Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability.

Explanation

Correct Answer

C:

A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. The corrective design is: Update the incorrect SVM static route after validating the new gateway and destination network. A relevant test is: Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction.

Other Answers

A:

LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. That mechanism fits a different troubleshooting network components failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Here the decisive mechanism is: A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it.

B:

A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. That mechanism fits a different troubleshooting network components failure: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Here the decisive mechanism is: A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it.

D:

Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. That mechanism fits a different troubleshooting network components failure: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Here the decisive mechanism is: A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it.

Question 267

A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. Which test would directly demonstrate that the required behavior now works?

  1. Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.
  2. Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction.
  3. Inspect each expected iSCSI session and host path state while testing the relevant subnet.
  4. Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume.

Explanation

Correct Answer

B:

Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction. This checks whether the remediation works: Update the incorrect SVM static route after validating the new gateway and destination network. The governing behavior is: A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it.

Other Answers

A:

Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. That check tests the separate condition: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. It would not establish the required result here: Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction.

C:

Inspect each expected iSCSI session and host path state while testing the relevant subnet. That check tests the separate condition: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. It would not establish the required result here: Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction.

D:

Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. That check tests the separate condition: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. It would not establish the required result here: Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction.

Question 268

A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. What ongoing safeguard should be added to the ONTAP change process?

  1. Include all failover target VLANs in network cutover acceptance.
  2. Baseline host-to-target path connectivity for every SAN network change.
  3. Add gateway dependencies to network decommission change checks.
  4. Include intercluster traffic in network firewall and route change impact reviews.

Explanation

Correct Answer

C:

Add gateway dependencies to network decommission change checks. This addresses the recurring cause: A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. It keeps the accepted correction in place: Update the incorrect SVM static route after validating the new gateway and destination network.

Other Answers

A:

Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Add gateway dependencies to network decommission change checks.

B:

Baseline host-to-target path connectivity for every SAN network change. This safeguard targets a different repeat failure: An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. For the present risk, the necessary control is: Add gateway dependencies to network decommission change checks.

D:

Include intercluster traffic in network firewall and route change impact reviews. This safeguard targets a different repeat failure: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. For the present risk, the necessary control is: Add gateway dependencies to network decommission change checks.

Question 269

A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. Which proposed action best resolves the specific issue without broadening access or risk?

  1. Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate.
  2. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.
  3. Inspect and repair broadcast-domain membership and port reachability for the affected VLAN.
  4. Correct the relevant forward DNS record and SVM/client name resolution configuration.

Explanation

Correct Answer

A:

Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate. LIF auto-revert determines whether it returns home after the original port becomes healthy. Acceptance requires: Inspect LIF current versus home location and test a safe failover/revert cycle.

Other Answers

B:

Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. This responds to another troubleshooting network components issue: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Its mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The present case instead requires: Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate.

C:

Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. This responds to another troubleshooting network components issue: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Its mechanism is: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. The present case instead requires: Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate.

D:

Correct the relevant forward DNS record and SVM/client name resolution configuration. This responds to another troubleshooting network components issue: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Its mechanism is: Successful IP connectivity narrows the defect to naming or authentication rather than link failure. The present case instead requires: Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate.

Question 270

A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. LIF auto-revert determines whether it returns home after the original port becomes healthy.
  2. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.
  3. An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain.
  4. Successful IP connectivity narrows the defect to naming or authentication rather than link failure.

Explanation

Correct Answer

A:

LIF auto-revert determines whether it returns home after the original port becomes healthy. The corrective design is: Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate. A relevant test is: Inspect LIF current versus home location and test a safe failover/revert cycle.

Other Answers

B:

LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. That mechanism fits a different troubleshooting network components failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Here the decisive mechanism is: LIF auto-revert determines whether it returns home after the original port becomes healthy.

C:

An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: LIF auto-revert determines whether it returns home after the original port becomes healthy.

D:

Successful IP connectivity narrows the defect to naming or authentication rather than link failure. That mechanism fits a different troubleshooting network components failure: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Here the decisive mechanism is: LIF auto-revert determines whether it returns home after the original port becomes healthy.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests