Question 250Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. Which storage-system mechanism is the decisive factor in this situation? Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. Successful IP connectivity narrows the defect to naming or authentication rather than link failure. A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. ExplanationCorrect Answer A:Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. The corrective design is: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. A relevant test is: Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. Other Answers B:An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. C:Successful IP connectivity narrows the defect to naming or authentication rather than link failure. That mechanism fits a different troubleshooting network components failure: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Here the decisive mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. D:A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. That mechanism fits a different troubleshooting network components failure: A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. Here the decisive mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing.
Question 251Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. Which test would directly demonstrate that the required behavior now works? Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. Resolve the share name from the client and compare it with the intended LIF IP before mounting. Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction. ExplanationCorrect Answer A:Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. This checks whether the remediation works: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. The governing behavior is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. Other Answers B:Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. That check tests the separate condition: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. It would not establish the required result here: Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. C:Resolve the share name from the client and compare it with the intended LIF IP before mounting. That check tests the separate condition: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. It would not establish the required result here: Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. D:Compare off-subnet and same-subnet client reachability and inspect the SVM route after the correction. That check tests the separate condition: A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. It would not establish the required result here: Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions.
Question 252Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. What ongoing safeguard should be added to the ONTAP change process? Run automated port-reachability validation after network refreshes. Test DNS changes for expected storage server records before switching users. Automate uniqueness checks against IP address management during LIF creation. Add gateway dependencies to network decommission change checks. ExplanationCorrect Answer C:Automate uniqueness checks against IP address management during LIF creation. This addresses the recurring cause: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. It keeps the accepted correction in place: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. Other Answers A:Run automated port-reachability validation after network refreshes. This safeguard targets a different repeat failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. For the present risk, the necessary control is: Automate uniqueness checks against IP address management during LIF creation. B:Test DNS changes for expected storage server records before switching users. This safeguard targets a different repeat failure: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. For the present risk, the necessary control is: Automate uniqueness checks against IP address management during LIF creation. D:Add gateway dependencies to network decommission change checks. This safeguard targets a different repeat failure: A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. For the present risk, the necessary control is: Automate uniqueness checks against IP address management during LIF creation.
Question 253A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Which proposed action best resolves the specific issue without broadening access or risk? Correct the relevant forward DNS record and SVM/client name resolution configuration. Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. ExplanationCorrect Answer A:Correct the relevant forward DNS record and SVM/client name resolution configuration. Successful IP connectivity narrows the defect to naming or authentication rather than link failure. Acceptance requires: Resolve the share name from the client and compare it with the intended LIF IP before mounting. Other Answers B:Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. This responds to another troubleshooting network components issue: Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. Its mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. The present case instead requires: Correct the relevant forward DNS record and SVM/client name resolution configuration. C:Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. This responds to another troubleshooting network components issue: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Its mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The present case instead requires: Correct the relevant forward DNS record and SVM/client name resolution configuration. D:Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. This responds to another troubleshooting network components issue: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Its mechanism is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. The present case instead requires: Correct the relevant forward DNS record and SVM/client name resolution configuration.
Question 254A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Which ONTAP behavior explains why the original approach does not meet the requirement? Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. Successful IP connectivity narrows the defect to naming or authentication rather than link failure. ExplanationCorrect Answer D:Successful IP connectivity narrows the defect to naming or authentication rather than link failure. The corrective design is: Correct the relevant forward DNS record and SVM/client name resolution configuration. A relevant test is: Resolve the share name from the client and compare it with the intended LIF IP before mounting. Other Answers A:Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. That mechanism fits a different troubleshooting network components failure: Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. Here the decisive mechanism is: Successful IP connectivity narrows the defect to naming or authentication rather than link failure. B:LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. That mechanism fits a different troubleshooting network components failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Here the decisive mechanism is: Successful IP connectivity narrows the defect to naming or authentication rather than link failure. C:Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. That mechanism fits a different troubleshooting network components failure: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Here the decisive mechanism is: Successful IP connectivity narrows the defect to naming or authentication rather than link failure.
Question 255A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Which observation provides the strongest evidence that the issue was corrected? Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. Resolve the share name from the client and compare it with the intended LIF IP before mounting. Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. ExplanationCorrect Answer B:Resolve the share name from the client and compare it with the intended LIF IP before mounting. This checks whether the remediation works: Correct the relevant forward DNS record and SVM/client name resolution configuration. The governing behavior is: Successful IP connectivity narrows the defect to naming or authentication rather than link failure. Other Answers A:Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions. That check tests the separate condition: Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. It would not establish the required result here: Resolve the share name from the client and compare it with the intended LIF IP before mounting. C:Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. That check tests the separate condition: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. It would not establish the required result here: Resolve the share name from the client and compare it with the intended LIF IP before mounting. D:Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. That check tests the separate condition: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. It would not establish the required result here: Resolve the share name from the client and compare it with the intended LIF IP before mounting.
Question 256A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Which preventive practice most directly reduces recurrence of this failure? Automate uniqueness checks against IP address management during LIF creation. Test DNS changes for expected storage server records before switching users. Include all failover target VLANs in network cutover acceptance. Include intercluster traffic in network firewall and route change impact reviews. ExplanationCorrect Answer B:Test DNS changes for expected storage server records before switching users. This addresses the recurring cause: Successful IP connectivity narrows the defect to naming or authentication rather than link failure. It keeps the accepted correction in place: Correct the relevant forward DNS record and SVM/client name resolution configuration. Other Answers A:Automate uniqueness checks against IP address management during LIF creation. This safeguard targets a different repeat failure: Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. For the present risk, the necessary control is: Test DNS changes for expected storage server records before switching users. C:Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Test DNS changes for expected storage server records before switching users. D:Include intercluster traffic in network firewall and route change impact reviews. This safeguard targets a different repeat failure: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. For the present risk, the necessary control is: Test DNS changes for expected storage server records before switching users.
Question 257After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Which ONTAP administration step most directly corrects this failure? Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate. ExplanationCorrect Answer A:Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. Acceptance requires: Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. Other Answers B:Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. This responds to another troubleshooting network components issue: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Its mechanism is: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. The present case instead requires: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. C:Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. This responds to another troubleshooting network components issue: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Its mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The present case instead requires: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. D:Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate. This responds to another troubleshooting network components issue: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. Its mechanism is: LIF auto-revert determines whether it returns home after the original port becomes healthy. The present case instead requires: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes.
Question 258After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Which technical distinction most directly explains the observed result? An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. LIF auto-revert determines whether it returns home after the original port becomes healthy. ExplanationCorrect Answer C:Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. The corrective design is: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. A relevant test is: Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. Other Answers A:An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. B:LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. That mechanism fits a different troubleshooting network components failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Here the decisive mechanism is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. D:LIF auto-revert determines whether it returns home after the original port becomes healthy. That mechanism fits a different troubleshooting network components failure: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. Here the decisive mechanism is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability.
Question 259After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. What check best verifies this change under the stated operating conditions? Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. Inspect LIF current versus home location and test a safe failover/revert cycle. ExplanationCorrect Answer C:Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. This checks whether the remediation works: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. The governing behavior is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. Other Answers A:Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. That check tests the separate condition: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. It would not establish the required result here: Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. B:Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. That check tests the separate condition: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. It would not establish the required result here: Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. D:Inspect LIF current versus home location and test a safe failover/revert cycle. That check tests the separate condition: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. It would not establish the required result here: Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume.
Question 260After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. What control should the team keep after the corrective change has passed testing? Run automated port-reachability validation after network refreshes. Include all failover target VLANs in network cutover acceptance. Track LIFs persistently off-home and review auto-revert policy after maintenance. Include intercluster traffic in network firewall and route change impact reviews. ExplanationCorrect Answer D:Include intercluster traffic in network firewall and route change impact reviews. This addresses the recurring cause: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. It keeps the accepted correction in place: Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. Other Answers A:Run automated port-reachability validation after network refreshes. This safeguard targets a different repeat failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. For the present risk, the necessary control is: Include intercluster traffic in network firewall and route change impact reviews. B:Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Include intercluster traffic in network firewall and route change impact reviews. C:Track LIFs persistently off-home and review auto-revert policy after maintenance. This safeguard targets a different repeat failure: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. For the present risk, the necessary control is: Include intercluster traffic in network firewall and route change impact reviews.