McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 25

Question 240

After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Which preventive practice most directly reduces recurrence of this failure?

  1. Run automated port-reachability validation after network refreshes.
  2. Include all failover target VLANs in network cutover acceptance.
  3. Automate uniqueness checks against IP address management during LIF creation.
  4. Track LIFs persistently off-home and review auto-revert policy after maintenance.

Explanation

Correct Answer

A:

Run automated port-reachability validation after network refreshes. This addresses the recurring cause: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. It keeps the accepted correction in place: Inspect and repair broadcast-domain membership and port reachability for the affected VLAN.

Other Answers

B:

Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Run automated port-reachability validation after network refreshes.

C:

Automate uniqueness checks against IP address management during LIF creation. This safeguard targets a different repeat failure: Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. For the present risk, the necessary control is: Run automated port-reachability validation after network refreshes.

D:

Track LIFs persistently off-home and review auto-revert policy after maintenance. This safeguard targets a different repeat failure: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. For the present risk, the necessary control is: Run automated port-reachability validation after network refreshes.

Question 241

An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Which ONTAP administration step most directly corrects this failure?

  1. Inspect and repair broadcast-domain membership and port reachability for the affected VLAN.
  2. Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate.
  3. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.
  4. Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions.

Explanation

Correct Answer

C:

Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. Acceptance requires: Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.

Other Answers

A:

Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. This responds to another troubleshooting network components issue: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Its mechanism is: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. The present case instead requires: Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.

B:

Review the LIF's home-node/home-port and auto-revert settings, then use the supported revert workflow when appropriate. This responds to another troubleshooting network components issue: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. Its mechanism is: LIF auto-revert determines whether it returns home after the original port becomes healthy. The present case instead requires: Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.

D:

Correlate physical link status, LIF migrations and switch event timing before changing protocol permissions. This responds to another troubleshooting network components issue: A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. Its mechanism is: Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs. The present case instead requires: Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.

Question 242

An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Which technical distinction most directly explains the observed result?

  1. An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain.
  2. LIF auto-revert determines whether it returns home after the original port becomes healthy.
  3. Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs.
  4. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.

Explanation

Correct Answer

D:

LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The corrective design is: Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. A relevant test is: Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.

Other Answers

A:

An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.

B:

LIF auto-revert determines whether it returns home after the original port becomes healthy. That mechanism fits a different troubleshooting network components failure: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. Here the decisive mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.

C:

Port or VLAN failover can break an otherwise authorized SMB session independent of share ACLs. That mechanism fits a different troubleshooting network components failure: A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. Here the decisive mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.

Question 243

An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. What check best verifies this change under the stated operating conditions?

  1. Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction.
  2. Inspect LIF current versus home location and test a safe failover/revert cycle.
  3. Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.
  4. Reproduce one link outage and capture the affected LIF's port and client TCP connectivity.

Explanation

Correct Answer

C:

Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. This checks whether the remediation works: Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. The governing behavior is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.

Other Answers

A:

Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. That check tests the separate condition: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. It would not establish the required result here: Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.

B:

Inspect LIF current versus home location and test a safe failover/revert cycle. That check tests the separate condition: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. It would not establish the required result here: Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.

D:

Reproduce one link outage and capture the affected LIF's port and client TCP connectivity. That check tests the separate condition: A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. It would not establish the required result here: Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.

Question 244

An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. What control should the team keep after the corrective change has passed testing?

  1. Run automated port-reachability validation after network refreshes.
  2. Track LIFs persistently off-home and review auto-revert policy after maintenance.
  3. Include all failover target VLANs in network cutover acceptance.
  4. Maintain physical and logical interface telemetry with time-synchronized alerts.

Explanation

Correct Answer

C:

Include all failover target VLANs in network cutover acceptance. This addresses the recurring cause: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. It keeps the accepted correction in place: Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.

Other Answers

A:

Run automated port-reachability validation after network refreshes. This safeguard targets a different repeat failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. For the present risk, the necessary control is: Include all failover target VLANs in network cutover acceptance.

B:

Track LIFs persistently off-home and review auto-revert policy after maintenance. This safeguard targets a different repeat failure: A port migration restores connectivity but the ONTAP data LIF continues running on a non-home path and operators assume it automatically reverts regardless of policy. For the present risk, the necessary control is: Include all failover target VLANs in network cutover acceptance.

D:

Maintain physical and logical interface telemetry with time-synchronized alerts. This safeguard targets a different repeat failure: A clustered NAS system shows intermittent access only when one switch link fails, and operators immediately blame SMB file permissions. For the present risk, the necessary control is: Include all failover target VLANs in network cutover acceptance.

Question 245

An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Which change most directly meets the stated storage requirement?

  1. Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.
  2. Inspect and repair broadcast-domain membership and port reachability for the affected VLAN.
  3. Restrict or repair failover targets so every eligible port can reach the LIF's client subnet.
  4. Inspect intercluster LIF connectivity and the replication network's permitted ports/routes.

Explanation

Correct Answer

A:

Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size. A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. Acceptance requires: Inspect each expected iSCSI session and host path state while testing the relevant subnet.

Other Answers

B:

Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. This responds to another troubleshooting network components issue: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Its mechanism is: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. The present case instead requires: Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.

C:

Restrict or repair failover targets so every eligible port can reach the LIF's client subnet. This responds to another troubleshooting network components issue: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Its mechanism is: LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. The present case instead requires: Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.

D:

Inspect intercluster LIF connectivity and the replication network's permitted ports/routes. This responds to another troubleshooting network components issue: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Its mechanism is: Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. The present case instead requires: Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.

Question 246

An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Why would the proposed setup fail to provide the stated behavior?

  1. An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain.
  2. LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port.
  3. A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.
  4. Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability.

Explanation

Correct Answer

C:

A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. The corrective design is: Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size. A relevant test is: Inspect each expected iSCSI session and host path state while testing the relevant subnet.

Other Answers

A:

An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.

B:

LIF failover policy cannot compensate for incorrect VLAN reachability on the destination port. That mechanism fits a different troubleshooting network components failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. Here the decisive mechanism is: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.

D:

Intercluster replication uses its own connectivity path; a healthy NAS data LIF does not validate replication LIF reachability. That mechanism fits a different troubleshooting network components failure: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. Here the decisive mechanism is: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.

Question 247

An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Which result should be required before the storage change is accepted?

  1. Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction.
  2. Inspect each expected iSCSI session and host path state while testing the relevant subnet.
  3. Trigger a test port outage and verify the LIF's alternate port maintains client connectivity.
  4. Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume.

Explanation

Correct Answer

B:

Inspect each expected iSCSI session and host path state while testing the relevant subnet. This checks whether the remediation works: Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size. The governing behavior is: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability.

Other Answers

A:

Check switch VLAN maps, ONTAP port reachability and a mount from the required subnet after correction. That check tests the separate condition: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. It would not establish the required result here: Inspect each expected iSCSI session and host path state while testing the relevant subnet.

C:

Trigger a test port outage and verify the LIF's alternate port maintains client connectivity. That check tests the separate condition: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. It would not establish the required result here: Inspect each expected iSCSI session and host path state while testing the relevant subnet.

D:

Test connectivity between the relevant intercluster LIFs and confirm relationship updates resume. That check tests the separate condition: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. It would not establish the required result here: Inspect each expected iSCSI session and host path state while testing the relevant subnet.

Question 248

An iSCSI host connects to one target IP but reports intermittent paths after a new subnet was added to the target SVM. Which durable operational control best prevents this issue from recurring?

  1. Run automated port-reachability validation after network refreshes.
  2. Include all failover target VLANs in network cutover acceptance.
  3. Baseline host-to-target path connectivity for every SAN network change.
  4. Include intercluster traffic in network firewall and route change impact reviews.

Explanation

Correct Answer

C:

Baseline host-to-target path connectivity for every SAN network change. This addresses the recurring cause: A path problem occurs at target network or host-path discovery; changing a LUN's capacity does not repair session reachability. It keeps the accepted correction in place: Review iSCSI LIF paths, subnet reachability and host multipathing configuration instead of only increasing LUN size.

Other Answers

A:

Run automated port-reachability validation after network refreshes. This safeguard targets a different repeat failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. For the present risk, the necessary control is: Baseline host-to-target path connectivity for every SAN network change.

B:

Include all failover target VLANs in network cutover acceptance. This safeguard targets a different repeat failure: An ONTAP data LIF works on its home port, but on failover it moves to an uplink with no access to the client VLAN. For the present risk, the necessary control is: Baseline host-to-target path connectivity for every SAN network change.

D:

Include intercluster traffic in network firewall and route change impact reviews. This safeguard targets a different repeat failure: After a firewall change, intercluster SnapMirror updates fail even though local client shares remain online. For the present risk, the necessary control is: Baseline host-to-target path connectivity for every SAN network change.

Question 249

Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. What should the administrator implement first to address the underlying gap?

  1. Inspect and repair broadcast-domain membership and port reachability for the affected VLAN.
  2. Correct the relevant forward DNS record and SVM/client name resolution configuration.
  3. Update the incorrect SVM static route after validating the new gateway and destination network.
  4. Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs.

Explanation

Correct Answer

D:

Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. Acceptance requires: Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions.

Other Answers

A:

Inspect and repair broadcast-domain membership and port reachability for the affected VLAN. This responds to another troubleshooting network components issue: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Its mechanism is: An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. The present case instead requires: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs.

B:

Correct the relevant forward DNS record and SVM/client name resolution configuration. This responds to another troubleshooting network components issue: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Its mechanism is: Successful IP connectivity narrows the defect to naming or authentication rather than link failure. The present case instead requires: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs.

C:

Update the incorrect SVM static route after validating the new gateway and destination network. This responds to another troubleshooting network components issue: A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. Its mechanism is: A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. The present case instead requires: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs.

Question 250

Two ONTAP LIFs accidentally receive the same static IP in one broadcast domain, and client connections alternate between controllers. Which storage-system mechanism is the decisive factor in this situation?

  1. Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing.
  2. An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain.
  3. Successful IP connectivity narrows the defect to naming or authentication rather than link failure.
  4. A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it.

Explanation

Correct Answer

A:

Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing. The corrective design is: Resolve the IP collision and allocate unique addresses or managed subnet IPs for the data LIFs. A relevant test is: Inspect ARP and ONTAP LIF addresses, correct the collision and retest stable client sessions.

Other Answers

B:

An administratively up LIF does not guarantee layer-2 reachability to the correct client broadcast domain. That mechanism fits a different troubleshooting network components failure: After a switch replacement, an SVM's NAS LIF remains up but clients can no longer mount because its home port belongs to the wrong broadcast domain. Here the decisive mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing.

C:

Successful IP connectivity narrows the defect to naming or authentication rather than link failure. That mechanism fits a different troubleshooting network components failure: A NAS client can reach the ONTAP LIF by IP but not by its SVM DNS name after a zone migration. Here the decisive mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing.

D:

A default or specific route determines off-subnet return traffic; local same-subnet connectivity does not exercise it. That mechanism fits a different troubleshooting network components failure: A storage VM route points to a retired gateway, causing access failures for clients outside the local data subnet but not for local peers. Here the decisive mechanism is: Duplicate layer-3 addresses on the same network disrupt ARP resolution and stable client routing.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests