McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 23

Question 220

A server team upgrades from 1GbE to 10GbE and expects existing LIF failover ports to provide matching performance, but the failover group includes mixed-speed interfaces. What ongoing safeguard should be added to the ONTAP change process?

  1. Use planned failover capacity checks for network-speed upgrades.
  2. Alert on LIFs with no valid failover targets and retest after port changes.
  3. Keep physical link membership and LACP configuration under paired switch/storage change control.
  4. Maintain protocol-specific LIF and fabric connectivity inventory.

Explanation

Correct Answer

A:

Use planned failover capacity checks for network-speed upgrades. This addresses the recurring cause: Failover-group membership controls eligible alternate ports; an alternate low-speed path can be reachable yet undersized. It keeps the accepted correction in place: Review the LIF failover-group target ports and network capacities, adjusting placement within supported connectivity constraints.

Other Answers

B:

Alert on LIFs with no valid failover targets and retest after port changes. This safeguard targets a different repeat failure: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. For the present risk, the necessary control is: Use planned failover capacity checks for network-speed upgrades.

C:

Keep physical link membership and LACP configuration under paired switch/storage change control. This safeguard targets a different repeat failure: A switch uses an LACP port-channel but ONTAP is configured with independent physical ports and the team expects redundant links to function as an aggregate automatically. For the present risk, the necessary control is: Use planned failover capacity checks for network-speed upgrades.

D:

Maintain protocol-specific LIF and fabric connectivity inventory. This safeguard targets a different repeat failure: A private SAN segment is deployed with FC fabrics, while the provisioning plan assumes FC target connectivity can use the same IP LIF as iSCSI traffic. For the present risk, the necessary control is: Use planned failover capacity checks for network-speed upgrades.

Question 221

A storage administrator enables an NFS server on one SVM but assigns the data LIF a management-only service policy and clients fail to reach its data service. Which proposed action best resolves the specific issue without broadening access or risk?

  1. Create or verify the supported ONTAP VLAN port configuration and assign it to the correct broadcast domain.
  2. Place the LIF on an appropriate broadcast-domain/subnet and validate a route to the authorized client.
  3. Configure an appropriate LIF failover policy and failover group with reachable eligible ports.
  4. Assign a compatible data service policy to the LIF and verify the correct protocol endpoint.

Explanation

Correct Answer

D:

Assign a compatible data service policy to the LIF and verify the correct protocol endpoint. LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed. Acceptance requires: Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF.

Other Answers

A:

Create or verify the supported ONTAP VLAN port configuration and assign it to the correct broadcast domain. This responds to another network components issue: A new VLAN is present on the switch but the ONTAP physical port has no matching VLAN interface, so a new data LIF cannot reach the tagged network. Its mechanism is: Switch-side VLAN configuration does not create the necessary tagged logical port in the controller network stack. The present case instead requires: Assign a compatible data service policy to the LIF and verify the correct protocol endpoint.

B:

Place the LIF on an appropriate broadcast-domain/subnet and validate a route to the authorized client. This responds to another network components issue: An SVM's new NFS LIF is assigned to a port that is not reachable from the client subnet, even though another port on the same controller could reach that VLAN. Its mechanism is: A LIF IP is reachable only when its network port, layer-2 domain and routing match the client path. The present case instead requires: Assign a compatible data service policy to the LIF and verify the correct protocol endpoint.

C:

Configure an appropriate LIF failover policy and failover group with reachable eligible ports. This responds to another network components issue: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. Its mechanism is: A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback. The present case instead requires: Assign a compatible data service policy to the LIF and verify the correct protocol endpoint.

Question 222

A storage administrator enables an NFS server on one SVM but assigns the data LIF a management-only service policy and clients fail to reach its data service. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed.
  2. Switch-side VLAN configuration does not create the necessary tagged logical port in the controller network stack.
  3. A LIF IP is reachable only when its network port, layer-2 domain and routing match the client path.
  4. A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback.

Explanation

Correct Answer

A:

LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed. The corrective design is: Assign a compatible data service policy to the LIF and verify the correct protocol endpoint. A relevant test is: Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF.

Other Answers

B:

Switch-side VLAN configuration does not create the necessary tagged logical port in the controller network stack. That mechanism fits a different network components failure: A new VLAN is present on the switch but the ONTAP physical port has no matching VLAN interface, so a new data LIF cannot reach the tagged network. Here the decisive mechanism is: LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed.

C:

A LIF IP is reachable only when its network port, layer-2 domain and routing match the client path. That mechanism fits a different network components failure: An SVM's new NFS LIF is assigned to a port that is not reachable from the client subnet, even though another port on the same controller could reach that VLAN. Here the decisive mechanism is: LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed.

D:

A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback. That mechanism fits a different network components failure: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. Here the decisive mechanism is: LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed.

Question 223

A storage administrator enables an NFS server on one SVM but assigns the data LIF a management-only service policy and clients fail to reach its data service. Which observation provides the strongest evidence that the issue was corrected?

  1. Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF.
  2. Validate VLAN port state, correct tagging and end-to-end test traffic from the client subnet.
  3. Compare port reachability, broadcast-domain membership and a client mount attempt after moving the LIF.
  4. Inspect `network interface show -failover` and test the selected port-loss scenario while checking client reachability.

Explanation

Correct Answer

A:

Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF. This checks whether the remediation works: Assign a compatible data service policy to the LIF and verify the correct protocol endpoint. The governing behavior is: LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed.

Other Answers

B:

Validate VLAN port state, correct tagging and end-to-end test traffic from the client subnet. That check tests the separate condition: A new VLAN is present on the switch but the ONTAP physical port has no matching VLAN interface, so a new data LIF cannot reach the tagged network. It would not establish the required result here: Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF.

C:

Compare port reachability, broadcast-domain membership and a client mount attempt after moving the LIF. That check tests the separate condition: An SVM's new NFS LIF is assigned to a port that is not reachable from the client subnet, even though another port on the same controller could reach that VLAN. It would not establish the required result here: Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF.

D:

Inspect `network interface show -failover` and test the selected port-loss scenario while checking client reachability. That check tests the separate condition: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. It would not establish the required result here: Inspect effective service-policy bindings and attempt a client NFS mount over the expected LIF.

Question 224

A storage administrator enables an NFS server on one SVM but assigns the data LIF a management-only service policy and clients fail to reach its data service. Which preventive practice most directly reduces recurrence of this failure?

  1. Keep switch and ONTAP VLAN IDs synchronized through configuration reviews.
  2. Check VLAN and broadcast-domain placement during LIF provisioning reviews.
  3. Validate service-policy role and actual protocol connectivity at every new LIF deployment.
  4. Alert on LIFs with no valid failover targets and retest after port changes.

Explanation

Correct Answer

C:

Validate service-policy role and actual protocol connectivity at every new LIF deployment. This addresses the recurring cause: LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed. It keeps the accepted correction in place: Assign a compatible data service policy to the LIF and verify the correct protocol endpoint.

Other Answers

A:

Keep switch and ONTAP VLAN IDs synchronized through configuration reviews. This safeguard targets a different repeat failure: A new VLAN is present on the switch but the ONTAP physical port has no matching VLAN interface, so a new data LIF cannot reach the tagged network. For the present risk, the necessary control is: Validate service-policy role and actual protocol connectivity at every new LIF deployment.

B:

Check VLAN and broadcast-domain placement during LIF provisioning reviews. This safeguard targets a different repeat failure: An SVM's new NFS LIF is assigned to a port that is not reachable from the client subnet, even though another port on the same controller could reach that VLAN. For the present risk, the necessary control is: Validate service-policy role and actual protocol connectivity at every new LIF deployment.

D:

Alert on LIFs with no valid failover targets and retest after port changes. This safeguard targets a different repeat failure: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. For the present risk, the necessary control is: Validate service-policy role and actual protocol connectivity at every new LIF deployment.

Question 225

A private SAN segment is deployed with FC fabrics, while the provisioning plan assumes FC target connectivity can use the same IP LIF as iSCSI traffic. Which ONTAP administration step most directly corrects this failure?

  1. Configure an appropriate LIF failover policy and failover group with reachable eligible ports.
  2. Review the LIF failover-group target ports and network capacities, adjusting placement within supported connectivity constraints.
  3. Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs.
  4. Separate the tenants using the correct ONTAP IPspaces and scoped SVM network assignments.

Explanation

Correct Answer

C:

Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs. Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery. Acceptance requires: Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions.

Other Answers

A:

Configure an appropriate LIF failover policy and failover group with reachable eligible ports. This responds to another network components issue: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. Its mechanism is: A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback. The present case instead requires: Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs.

B:

Review the LIF failover-group target ports and network capacities, adjusting placement within supported connectivity constraints. This responds to another network components issue: A server team upgrades from 1GbE to 10GbE and expects existing LIF failover ports to provide matching performance, but the failover group includes mixed-speed interfaces. Its mechanism is: Failover-group membership controls eligible alternate ports; an alternate low-speed path can be reachable yet undersized. The present case instead requires: Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs.

D:

Separate the tenants using the correct ONTAP IPspaces and scoped SVM network assignments. This responds to another network components issue: Two tenants reuse the same private address range, but a networking change inadvertently puts their storage LIFs in a single shared routing table. Its mechanism is: IPspaces provide isolated routing domains and permit overlapping addresses when the associated network design is consistent. The present case instead requires: Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs.

Question 226

A private SAN segment is deployed with FC fabrics, while the provisioning plan assumes FC target connectivity can use the same IP LIF as iSCSI traffic. Which technical distinction most directly explains the observed result?

  1. A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback.
  2. Failover-group membership controls eligible alternate ports; an alternate low-speed path can be reachable yet undersized.
  3. Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery.
  4. IPspaces provide isolated routing domains and permit overlapping addresses when the associated network design is consistent.

Explanation

Correct Answer

C:

Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery. The corrective design is: Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs. A relevant test is: Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions.

Other Answers

A:

A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback. That mechanism fits a different network components failure: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. Here the decisive mechanism is: Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery.

B:

Failover-group membership controls eligible alternate ports; an alternate low-speed path can be reachable yet undersized. That mechanism fits a different network components failure: A server team upgrades from 1GbE to 10GbE and expects existing LIF failover ports to provide matching performance, but the failover group includes mixed-speed interfaces. Here the decisive mechanism is: Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery.

D:

IPspaces provide isolated routing domains and permit overlapping addresses when the associated network design is consistent. That mechanism fits a different network components failure: Two tenants reuse the same private address range, but a networking change inadvertently puts their storage LIFs in a single shared routing table. Here the decisive mechanism is: Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery.

Question 227

A private SAN segment is deployed with FC fabrics, while the provisioning plan assumes FC target connectivity can use the same IP LIF as iSCSI traffic. What check best verifies this change under the stated operating conditions?

  1. Inspect `network interface show -failover` and test the selected port-loss scenario while checking client reachability.
  2. Force a controlled LIF migration and compare throughput and latency at both target ports.
  3. Probe both tenant networks independently and inspect which IPspace and routing table each LIF uses.
  4. Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions.

Explanation

Correct Answer

D:

Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions. This checks whether the remediation works: Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs. The governing behavior is: Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery.

Other Answers

A:

Inspect `network interface show -failover` and test the selected port-loss scenario while checking client reachability. That check tests the separate condition: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. It would not establish the required result here: Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions.

B:

Force a controlled LIF migration and compare throughput and latency at both target ports. That check tests the separate condition: A server team upgrades from 1GbE to 10GbE and expects existing LIF failover ports to provide matching performance, but the failover group includes mixed-speed interfaces. It would not establish the required result here: Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions.

C:

Probe both tenant networks independently and inspect which IPspace and routing table each LIF uses. That check tests the separate condition: Two tenants reuse the same private address range, but a networking change inadvertently puts their storage LIFs in a single shared routing table. It would not establish the required result here: Confirm FC target WWPN visibility and zoning independently from TCP/IP iSCSI sessions.

Question 228

A private SAN segment is deployed with FC fabrics, while the provisioning plan assumes FC target connectivity can use the same IP LIF as iSCSI traffic. What control should the team keep after the corrective change has passed testing?

  1. Maintain protocol-specific LIF and fabric connectivity inventory.
  2. Alert on LIFs with no valid failover targets and retest after port changes.
  3. Use planned failover capacity checks for network-speed upgrades.
  4. Audit IPspace boundaries before introducing overlapping subnets.

Explanation

Correct Answer

A:

Maintain protocol-specific LIF and fabric connectivity inventory. This addresses the recurring cause: Fibre Channel logical ports and iSCSI IP endpoints use different transport paths and target discovery. It keeps the accepted correction in place: Configure appropriate FC target LIFs on supported FC adapters and separate them from Ethernet-based iSCSI LIFs.

Other Answers

B:

Alert on LIFs with no valid failover targets and retest after port changes. This safeguard targets a different repeat failure: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. For the present risk, the necessary control is: Maintain protocol-specific LIF and fabric connectivity inventory.

C:

Use planned failover capacity checks for network-speed upgrades. This safeguard targets a different repeat failure: A server team upgrades from 1GbE to 10GbE and expects existing LIF failover ports to provide matching performance, but the failover group includes mixed-speed interfaces. For the present risk, the necessary control is: Maintain protocol-specific LIF and fabric connectivity inventory.

D:

Audit IPspace boundaries before introducing overlapping subnets. This safeguard targets a different repeat failure: Two tenants reuse the same private address range, but a networking change inadvertently puts their storage LIFs in a single shared routing table. For the present risk, the necessary control is: Maintain protocol-specific LIF and fabric connectivity inventory.

Question 229

A NAS SVM has two data subnets, but all client replies leave through an unrelated default gateway and one subnet exhibits asymmetric routing. Which change most directly meets the stated storage requirement?

  1. Place the LIF on an appropriate broadcast-domain/subnet and validate a route to the authorized client.
  2. Configure appropriate SVM routing entries for each remote client destination and validate path symmetry.
  3. Configure an appropriate LIF failover policy and failover group with reachable eligible ports.
  4. Assign a compatible data service policy to the LIF and verify the correct protocol endpoint.

Explanation

Correct Answer

B:

Configure appropriate SVM routing entries for each remote client destination and validate path symmetry. LIF IP/subnet matching does not remove the need for correct next-hop routes to off-subnet clients. Acceptance requires: Use packet-path and route inspection for both subnets and verify the return path reaches clients.

Other Answers

A:

Place the LIF on an appropriate broadcast-domain/subnet and validate a route to the authorized client. This responds to another network components issue: An SVM's new NFS LIF is assigned to a port that is not reachable from the client subnet, even though another port on the same controller could reach that VLAN. Its mechanism is: A LIF IP is reachable only when its network port, layer-2 domain and routing match the client path. The present case instead requires: Configure appropriate SVM routing entries for each remote client destination and validate path symmetry.

C:

Configure an appropriate LIF failover policy and failover group with reachable eligible ports. This responds to another network components issue: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. Its mechanism is: A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback. The present case instead requires: Configure appropriate SVM routing entries for each remote client destination and validate path symmetry.

D:

Assign a compatible data service policy to the LIF and verify the correct protocol endpoint. This responds to another network components issue: A storage administrator enables an NFS server on one SVM but assigns the data LIF a management-only service policy and clients fail to reach its data service. Its mechanism is: LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed. The present case instead requires: Configure appropriate SVM routing entries for each remote client destination and validate path symmetry.

Question 230

A NAS SVM has two data subnets, but all client replies leave through an unrelated default gateway and one subnet exhibits asymmetric routing. Why would the proposed setup fail to provide the stated behavior?

  1. A LIF IP is reachable only when its network port, layer-2 domain and routing match the client path.
  2. A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback.
  3. LIF IP/subnet matching does not remove the need for correct next-hop routes to off-subnet clients.
  4. LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed.

Explanation

Correct Answer

C:

LIF IP/subnet matching does not remove the need for correct next-hop routes to off-subnet clients. The corrective design is: Configure appropriate SVM routing entries for each remote client destination and validate path symmetry. A relevant test is: Use packet-path and route inspection for both subnets and verify the return path reaches clients.

Other Answers

A:

A LIF IP is reachable only when its network port, layer-2 domain and routing match the client path. That mechanism fits a different network components failure: An SVM's new NFS LIF is assigned to a port that is not reachable from the client subnet, even though another port on the same controller could reach that VLAN. Here the decisive mechanism is: LIF IP/subnet matching does not remove the need for correct next-hop routes to off-subnet clients.

B:

A LIF can move only to targets permitted by its failover policy and network group; an empty target set leaves no working fallback. That mechanism fits a different network components failure: An HA node failure causes NAS access to stop because the only SVM data LIF was configured with no eligible failover target. Here the decisive mechanism is: LIF IP/subnet matching does not remove the need for correct next-hop routes to off-subnet clients.

D:

LIF service policies restrict traffic roles; an IP address alone is not proof that NFS data service is allowed. That mechanism fits a different network components failure: A storage administrator enables an NFS server on one SVM but assigns the data LIF a management-only service policy and clients fail to reach its data service. Here the decisive mechanism is: LIF IP/subnet matching does not remove the need for correct next-hop routes to off-subnet clients.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests