McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 31

Question 300

An administrator creates an iSCSI LUN for a Linux host but selects an unrelated Windows OS type in its igroup and LUN settings. What ongoing safeguard should be added to the ONTAP change process?

  1. Validate host platform, protocol and OS type in the SAN provisioning request.
  2. Require per-host igroup/LUN mapping validation in SAN provisioning templates.
  3. Test multipathing after adapter, driver and SAN target changes.
  4. Standardize at least two independent target paths and supported host multipath policies.

Explanation

Correct Answer

A:

Validate host platform, protocol and OS type in the SAN provisioning request. This addresses the recurring cause: The configured host OS type influences ONTAP SAN device behavior and cannot be treated as cosmetic metadata. It keeps the accepted correction in place: Use the host-appropriate supported OS type and confirm initiator group/provisioning alignment before mapping.

Other Answers

B:

Require per-host igroup/LUN mapping validation in SAN provisioning templates. This safeguard targets a different repeat failure: A Linux database host sees an iSCSI target but cannot see its new ONTAP LUN because the administrator created only the LUN, not the host-access mapping. For the present risk, the necessary control is: Validate host platform, protocol and OS type in the SAN provisioning request.

C:

Test multipathing after adapter, driver and SAN target changes. This safeguard targets a different repeat failure: A host sees multiple copies of the same LUN as separate disks after a SAN path expansion, raising a risk of file-system corruption. For the present risk, the necessary control is: Validate host platform, protocol and OS type in the SAN provisioning request.

D:

Standardize at least two independent target paths and supported host multipath policies. This safeguard targets a different repeat failure: An iSCSI SVM has a single data LIF, and a scheduled port-maintenance event disconnects a business-critical LUN even though the partner controller is healthy. For the present risk, the necessary control is: Validate host platform, protocol and OS type in the SAN provisioning request.

Question 301

A team evaluates NVMe over Fibre Channel for a supported host, but assumes conventional FC LUN igroups and SCSI multipathing rules can be reused unchanged. Which proposed action best resolves the specific issue without broadening access or risk?

  1. Provide redundant FC fabric paths and supported host multipathing to the mapped LUN.
  2. Create an igroup containing the host's initiator IQN and map the intended LUN to that igroup.
  3. Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination.
  4. Install and configure the supported host multipathing stack so multiple ALUA paths are presented as one logical device.

Explanation

Correct Answer

C:

Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination. NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior. Acceptance requires: Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery.

Other Answers

A:

Provide redundant FC fabric paths and supported host multipathing to the mapped LUN. This responds to another san solutions issue: A dual-controller FC SAN has one host path through one fabric, and the design assumes controller HA alone guarantees no host access interruption during a fabric outage. Its mechanism is: Controller HA cannot repair a missing independent host-to-target fabric path; host MPIO chooses surviving paths. The present case instead requires: Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination.

B:

Create an igroup containing the host's initiator IQN and map the intended LUN to that igroup. This responds to another san solutions issue: A Linux database host sees an iSCSI target but cannot see its new ONTAP LUN because the administrator created only the LUN, not the host-access mapping. Its mechanism is: LUN existence on an SVM does not expose a block device until an authorized initiator has a LUN mapping. The present case instead requires: Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination.

D:

Install and configure the supported host multipathing stack so multiple ALUA paths are presented as one logical device. This responds to another san solutions issue: A host sees multiple copies of the same LUN as separate disks after a SAN path expansion, raising a risk of file-system corruption. Its mechanism is: Without correct MPIO, the OS may interpret multiple paths to one LUN as independent disks rather than one device. The present case instead requires: Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination.

Question 302

A team evaluates NVMe over Fibre Channel for a supported host, but assumes conventional FC LUN igroups and SCSI multipathing rules can be reused unchanged. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. Controller HA cannot repair a missing independent host-to-target fabric path; host MPIO chooses surviving paths.
  2. NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior.
  3. LUN existence on an SVM does not expose a block device until an authorized initiator has a LUN mapping.
  4. Without correct MPIO, the OS may interpret multiple paths to one LUN as independent disks rather than one device.

Explanation

Correct Answer

B:

NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior. The corrective design is: Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination. A relevant test is: Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery.

Other Answers

A:

Controller HA cannot repair a missing independent host-to-target fabric path; host MPIO chooses surviving paths. That mechanism fits a different san solutions failure: A dual-controller FC SAN has one host path through one fabric, and the design assumes controller HA alone guarantees no host access interruption during a fabric outage. Here the decisive mechanism is: NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior.

C:

LUN existence on an SVM does not expose a block device until an authorized initiator has a LUN mapping. That mechanism fits a different san solutions failure: A Linux database host sees an iSCSI target but cannot see its new ONTAP LUN because the administrator created only the LUN, not the host-access mapping. Here the decisive mechanism is: NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior.

D:

Without correct MPIO, the OS may interpret multiple paths to one LUN as independent disks rather than one device. That mechanism fits a different san solutions failure: A host sees multiple copies of the same LUN as separate disks after a SAN path expansion, raising a risk of file-system corruption. Here the decisive mechanism is: NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior.

Question 303

A team evaluates NVMe over Fibre Channel for a supported host, but assumes conventional FC LUN igroups and SCSI multipathing rules can be reused unchanged. Which observation provides the strongest evidence that the issue was corrected?

  1. Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery.
  2. Disable one FC fabric in a controlled test and confirm the host I/O continues through an alternate path.
  3. Check the host initiator IQN, inspect the mapping and rescan to confirm only the assigned LUN appears.
  4. Inspect host multipath identity and confirm all eligible paths resolve to a single disk with controlled path failover.

Explanation

Correct Answer

A:

Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery. This checks whether the remediation works: Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination. The governing behavior is: NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior.

Other Answers

B:

Disable one FC fabric in a controlled test and confirm the host I/O continues through an alternate path. That check tests the separate condition: A dual-controller FC SAN has one host path through one fabric, and the design assumes controller HA alone guarantees no host access interruption during a fabric outage. It would not establish the required result here: Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery.

C:

Check the host initiator IQN, inspect the mapping and rescan to confirm only the assigned LUN appears. That check tests the separate condition: A Linux database host sees an iSCSI target but cannot see its new ONTAP LUN because the administrator created only the LUN, not the host-access mapping. It would not establish the required result here: Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery.

D:

Inspect host multipath identity and confirm all eligible paths resolve to a single disk with controlled path failover. That check tests the separate condition: A host sees multiple copies of the same LUN as separate disks after a SAN path expansion, raising a risk of file-system corruption. It would not establish the required result here: Discover the NVMe subsystem and namespace using approved host tooling and test ANA path recovery.

Question 304

A team evaluates NVMe over Fibre Channel for a supported host, but assumes conventional FC LUN igroups and SCSI multipathing rules can be reused unchanged. Which preventive practice most directly reduces recurrence of this failure?

  1. Audit dual-fabric zoning, WWPN inventory and MPIO after SAN fabric changes.
  2. Require per-host igroup/LUN mapping validation in SAN provisioning templates.
  3. Test multipathing after adapter, driver and SAN target changes.
  4. Keep separate NVMe versus SCSI connectivity checklists with version support verification.

Explanation

Correct Answer

D:

Keep separate NVMe versus SCSI connectivity checklists with version support verification. This addresses the recurring cause: NVMe namespace access and ANA path semantics differ from SCSI LUN mapping and ALUA behavior. It keeps the accepted correction in place: Follow supported NVMe/FC namespace and host ANA configuration workflows for the selected ONTAP/host combination.

Other Answers

A:

Audit dual-fabric zoning, WWPN inventory and MPIO after SAN fabric changes. This safeguard targets a different repeat failure: A dual-controller FC SAN has one host path through one fabric, and the design assumes controller HA alone guarantees no host access interruption during a fabric outage. For the present risk, the necessary control is: Keep separate NVMe versus SCSI connectivity checklists with version support verification.

B:

Require per-host igroup/LUN mapping validation in SAN provisioning templates. This safeguard targets a different repeat failure: A Linux database host sees an iSCSI target but cannot see its new ONTAP LUN because the administrator created only the LUN, not the host-access mapping. For the present risk, the necessary control is: Keep separate NVMe versus SCSI connectivity checklists with version support verification.

C:

Test multipathing after adapter, driver and SAN target changes. This safeguard targets a different repeat failure: A host sees multiple copies of the same LUN as separate disks after a SAN path expansion, raising a risk of file-system corruption. For the present risk, the necessary control is: Keep separate NVMe versus SCSI connectivity checklists with version support verification.

Question 305

A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Which ONTAP administration step most directly corrects this failure?

  1. Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.
  2. Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.
  3. Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.
  4. Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network.

Explanation

Correct Answer

C:

Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. Acceptance requires: Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.

Other Answers

A:

Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict. This responds to another troubleshooting san solutions issue: A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. Its mechanism is: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. The present case instead requires: Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.

B:

Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover. This responds to another troubleshooting san solutions issue: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Its mechanism is: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. The present case instead requires: Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.

D:

Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network. This responds to another troubleshooting san solutions issue: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. Its mechanism is: An inactive transport session can be caused by target network reachability even while the block device itself is intact. The present case instead requires: Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.

Question 306

A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Which technical distinction most directly explains the observed result?

  1. LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.
  2. LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.
  3. HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.
  4. An inactive transport session can be caused by target network reachability even while the block device itself is intact.

Explanation

Correct Answer

B:

LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. The corrective design is: Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. A relevant test is: Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.

Other Answers

A:

LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. That mechanism fits a different troubleshooting san solutions failure: A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. Here the decisive mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.

C:

HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. That mechanism fits a different troubleshooting san solutions failure: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Here the decisive mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.

D:

An inactive transport session can be caused by target network reachability even while the block device itself is intact. That mechanism fits a different troubleshooting san solutions failure: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. Here the decisive mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.

Question 307

A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. What check best verifies this change under the stated operating conditions?

  1. Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.
  2. Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.
  3. Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.
  4. Test TCP connectivity to the iSCSI target from each host NIC and inspect active session reports.

Explanation

Correct Answer

B:

Compare target WWPN discovery and igroup mappings for the failed host with a working reference host. This checks whether the remediation works: Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. The governing behavior is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.

Other Answers

A:

Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers. That check tests the separate condition: A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. It would not establish the required result here: Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.

C:

Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output. That check tests the separate condition: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. It would not establish the required result here: Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.

D:

Test TCP connectivity to the iSCSI target from each host NIC and inspect active session reports. That check tests the separate condition: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. It would not establish the required result here: Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.

Question 308

A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. What control should the team keep after the corrective change has passed testing?

  1. Maintain consistent mapping conventions and detect duplicate LUN IDs during changes.
  2. Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks.
  3. Audit FC zoning and initiator membership following HBA replacement.
  4. Retest SAN LIF paths whenever target switches or subnets change.

Explanation

Correct Answer

C:

Audit FC zoning and initiator membership following HBA replacement. This addresses the recurring cause: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. It keeps the accepted correction in place: Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.

Other Answers

A:

Maintain consistent mapping conventions and detect duplicate LUN IDs during changes. This safeguard targets a different repeat failure: A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. For the present risk, the necessary control is: Audit FC zoning and initiator membership following HBA replacement.

B:

Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks. This safeguard targets a different repeat failure: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. For the present risk, the necessary control is: Audit FC zoning and initiator membership following HBA replacement.

D:

Retest SAN LIF paths whenever target switches or subnets change. This safeguard targets a different repeat failure: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. For the present risk, the necessary control is: Audit FC zoning and initiator membership following HBA replacement.

Question 309

An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. Which change most directly meets the stated storage requirement?

  1. Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.
  2. Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network.
  3. Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.
  4. Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths.

Explanation

Correct Answer

B:

Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network. An inactive transport session can be caused by target network reachability even while the block device itself is intact. Acceptance requires: Test TCP connectivity to the iSCSI target from each host NIC and inspect active session reports.

Other Answers

A:

Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict. This responds to another troubleshooting san solutions issue: A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. Its mechanism is: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. The present case instead requires: Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network.

C:

Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. This responds to another troubleshooting san solutions issue: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Its mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. The present case instead requires: Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network.

D:

Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths. This responds to another troubleshooting san solutions issue: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. Its mechanism is: Unbounded target discovery can violate host multipath limits even if each individual link works. The present case instead requires: Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network.

Question 310

An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. Why would the proposed setup fail to provide the stated behavior?

  1. LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.
  2. LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.
  3. Unbounded target discovery can violate host multipath limits even if each individual link works.
  4. An inactive transport session can be caused by target network reachability even while the block device itself is intact.

Explanation

Correct Answer

D:

An inactive transport session can be caused by target network reachability even while the block device itself is intact. The corrective design is: Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network. A relevant test is: Test TCP connectivity to the iSCSI target from each host NIC and inspect active session reports.

Other Answers

A:

LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. That mechanism fits a different troubleshooting san solutions failure: A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. Here the decisive mechanism is: An inactive transport session can be caused by target network reachability even while the block device itself is intact.

B:

LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. That mechanism fits a different troubleshooting san solutions failure: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Here the decisive mechanism is: An inactive transport session can be caused by target network reachability even while the block device itself is intact.

C:

Unbounded target discovery can violate host multipath limits even if each individual link works. That mechanism fits a different troubleshooting san solutions failure: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. Here the decisive mechanism is: An inactive transport session can be caused by target network reachability even while the block device itself is intact.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests