McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 33

Question 320

A database server uses two ONTAP FC paths but repeatedly chooses a nonoptimized ALUA path after a driver update. Which preventive practice most directly reduces recurrence of this failure?

  1. Test SAN host utility and multipath changes against supported ONTAP configurations.
  2. Enforce platform-specific maximum paths in SAN host standards.
  3. Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks.
  4. Include SAN switch congestion/error telemetry in operational baselines.

Explanation

Correct Answer

A:

Test SAN host utility and multipath changes against supported ONTAP configurations. This addresses the recurring cause: ALUA communicates optimized versus nonoptimized paths; host multipath selection determines which paths carry routine I/O. It keeps the accepted correction in place: Review the supported host utilities and ALUA/multipath selection policy to restore optimized path use.

Other Answers

B:

Enforce platform-specific maximum paths in SAN host standards. This safeguard targets a different repeat failure: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. For the present risk, the necessary control is: Test SAN host utility and multipath changes against supported ONTAP configurations.

C:

Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks. This safeguard targets a different repeat failure: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. For the present risk, the necessary control is: Test SAN host utility and multipath changes against supported ONTAP configurations.

D:

Include SAN switch congestion/error telemetry in operational baselines. This safeguard targets a different repeat failure: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. For the present risk, the necessary control is: Test SAN host utility and multipath changes against supported ONTAP configurations.

Question 321

A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. Which ONTAP administration step most directly corrects this failure?

  1. Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.
  2. Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.
  3. Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network.
  4. Correlate end-to-end host, fabric and array performance measurements before expanding aggregate capacity.

Explanation

Correct Answer

A:

Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict. LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. Acceptance requires: Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.

Other Answers

B:

Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. This responds to another troubleshooting san solutions issue: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Its mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. The present case instead requires: Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.

C:

Check target iSCSI LIF reachability, VLANs, routes and initiator discovery for the failed network. This responds to another troubleshooting san solutions issue: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. Its mechanism is: An inactive transport session can be caused by target network reachability even while the block device itself is intact. The present case instead requires: Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.

D:

Correlate end-to-end host, fabric and array performance measurements before expanding aggregate capacity. This responds to another troubleshooting san solutions issue: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. Its mechanism is: Host I/O latency includes queueing and network/fabric delay; low disk latency shifts the investigation away from media capacity alone. The present case instead requires: Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.

Question 322

A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. Which technical distinction most directly explains the observed result?

  1. LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.
  2. LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.
  3. An inactive transport session can be caused by target network reachability even while the block device itself is intact.
  4. Host I/O latency includes queueing and network/fabric delay; low disk latency shifts the investigation away from media capacity alone.

Explanation

Correct Answer

A:

LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. The corrective design is: Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict. A relevant test is: Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.

Other Answers

B:

LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. That mechanism fits a different troubleshooting san solutions failure: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Here the decisive mechanism is: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.

C:

An inactive transport session can be caused by target network reachability even while the block device itself is intact. That mechanism fits a different troubleshooting san solutions failure: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. Here the decisive mechanism is: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.

D:

Host I/O latency includes queueing and network/fabric delay; low disk latency shifts the investigation away from media capacity alone. That mechanism fits a different troubleshooting san solutions failure: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. Here the decisive mechanism is: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.

Question 323

A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. What check best verifies this change under the stated operating conditions?

  1. Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.
  2. Test TCP connectivity to the iSCSI target from each host NIC and inspect active session reports.
  3. Collect host MPIO path metrics, fabric counters and array latency for the same slow transaction window.
  4. Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.

Explanation

Correct Answer

D:

Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers. This checks whether the remediation works: Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict. The governing behavior is: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name.

Other Answers

A:

Compare target WWPN discovery and igroup mappings for the failed host with a working reference host. That check tests the separate condition: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. It would not establish the required result here: Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.

B:

Test TCP connectivity to the iSCSI target from each host NIC and inspect active session reports. That check tests the separate condition: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. It would not establish the required result here: Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.

C:

Collect host MPIO path metrics, fabric counters and array latency for the same slow transaction window. That check tests the separate condition: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. It would not establish the required result here: Compare ONTAP mapping identifiers with discovered host SCSI target/LUN numbers.

Question 324

A newly provisioned LUN appears under an unexpected device number and an administrator assumes the ONTAP volume name controls its host SCSI identifier. What control should the team keep after the corrective change has passed testing?

  1. Maintain consistent mapping conventions and detect duplicate LUN IDs during changes.
  2. Audit FC zoning and initiator membership following HBA replacement.
  3. Retest SAN LIF paths whenever target switches or subnets change.
  4. Include SAN switch congestion/error telemetry in operational baselines.

Explanation

Correct Answer

A:

Maintain consistent mapping conventions and detect duplicate LUN IDs during changes. This addresses the recurring cause: LUN ID is assigned for a mapping and must remain unambiguous to the host initiator, independent of a friendly volume name. It keeps the accepted correction in place: Inspect the igroup's mapped LUN ID and confirm there is no per-initiator LUN ID conflict.

Other Answers

B:

Audit FC zoning and initiator membership following HBA replacement. This safeguard targets a different repeat failure: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. For the present risk, the necessary control is: Maintain consistent mapping conventions and detect duplicate LUN IDs during changes.

C:

Retest SAN LIF paths whenever target switches or subnets change. This safeguard targets a different repeat failure: An iSCSI initiator logs in to one target but loses connectivity to the other after a network change, and the LUN remains healthy. For the present risk, the necessary control is: Maintain consistent mapping conventions and detect duplicate LUN IDs during changes.

D:

Include SAN switch congestion/error telemetry in operational baselines. This safeguard targets a different repeat failure: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. For the present risk, the necessary control is: Maintain consistent mapping conventions and detect duplicate LUN IDs during changes.

Question 325

An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Which change most directly meets the stated storage requirement?

  1. Correlate end-to-end host, fabric and array performance measurements before expanding aggregate capacity.
  2. Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.
  3. Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.
  4. Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths.

Explanation

Correct Answer

B:

Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover. HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. Acceptance requires: Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.

Other Answers

A:

Correlate end-to-end host, fabric and array performance measurements before expanding aggregate capacity. This responds to another troubleshooting san solutions issue: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. Its mechanism is: Host I/O latency includes queueing and network/fabric delay; low disk latency shifts the investigation away from media capacity alone. The present case instead requires: Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.

C:

Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. This responds to another troubleshooting san solutions issue: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Its mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. The present case instead requires: Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.

D:

Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths. This responds to another troubleshooting san solutions issue: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. Its mechanism is: Unbounded target discovery can violate host multipath limits even if each individual link works. The present case instead requires: Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.

Question 326

An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Why would the proposed setup fail to provide the stated behavior?

  1. Host I/O latency includes queueing and network/fabric delay; low disk latency shifts the investigation away from media capacity alone.
  2. HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.
  3. LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.
  4. Unbounded target discovery can violate host multipath limits even if each individual link works.

Explanation

Correct Answer

B:

HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. The corrective design is: Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover. A relevant test is: Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.

Other Answers

A:

Host I/O latency includes queueing and network/fabric delay; low disk latency shifts the investigation away from media capacity alone. That mechanism fits a different troubleshooting san solutions failure: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. Here the decisive mechanism is: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.

C:

LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. That mechanism fits a different troubleshooting san solutions failure: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Here the decisive mechanism is: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.

D:

Unbounded target discovery can violate host multipath limits even if each individual link works. That mechanism fits a different troubleshooting san solutions failure: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. Here the decisive mechanism is: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.

Question 327

An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Which result should be required before the storage change is accepted?

  1. Collect host MPIO path metrics, fabric counters and array latency for the same slow transaction window.
  2. Compare target WWPN discovery and igroup mappings for the failed host with a working reference host.
  3. Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.
  4. Enumerate host paths before and after scoping and check stable I/O under a single-path failure.

Explanation

Correct Answer

C:

Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output. This checks whether the remediation works: Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover. The governing behavior is: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.

Other Answers

A:

Collect host MPIO path metrics, fabric counters and array latency for the same slow transaction window. That check tests the separate condition: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. It would not establish the required result here: Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.

B:

Compare target WWPN discovery and igroup mappings for the failed host with a working reference host. That check tests the separate condition: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. It would not establish the required result here: Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.

D:

Enumerate host paths before and after scoping and check stable I/O under a single-path failure. That check tests the separate condition: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. It would not establish the required result here: Perform a takeover simulation and verify the surviving optimized/available host paths are present in multipath output.

Question 328

An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Which durable operational control best prevents this issue from recurring?

  1. Include SAN switch congestion/error telemetry in operational baselines.
  2. Audit FC zoning and initiator membership following HBA replacement.
  3. Enforce platform-specific maximum paths in SAN host standards.
  4. Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks.

Explanation

Correct Answer

D:

Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks. This addresses the recurring cause: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. It keeps the accepted correction in place: Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.

Other Answers

A:

Include SAN switch congestion/error telemetry in operational baselines. This safeguard targets a different repeat failure: Host monitoring reports high I/O latency but the ONTAP controller's disk latency is low; one FC fabric also shows retransmits and congestion alarms. For the present risk, the necessary control is: Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks.

B:

Audit FC zoning and initiator membership following HBA replacement. This safeguard targets a different repeat failure: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. For the present risk, the necessary control is: Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks.

C:

Enforce platform-specific maximum paths in SAN host standards. This safeguard targets a different repeat failure: A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. For the present risk, the necessary control is: Run periodic end-to-end HA and SAN path failover tests instead of fabric-only checks.

Question 329

A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. What should the administrator implement first to address the underlying gap?

  1. Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths.
  2. Review the supported host utilities and ALUA/multipath selection policy to restore optimized path use.
  3. Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover.
  4. Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object.

Explanation

Correct Answer

A:

Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths. Unbounded target discovery can violate host multipath limits even if each individual link works. Acceptance requires: Enumerate host paths before and after scoping and check stable I/O under a single-path failure.

Other Answers

B:

Review the supported host utilities and ALUA/multipath selection policy to restore optimized path use. This responds to another troubleshooting san solutions issue: A database server uses two ONTAP FC paths but repeatedly chooses a nonoptimized ALUA path after a driver update. Its mechanism is: ALUA communicates optimized versus nonoptimized paths; host multipath selection determines which paths carry routine I/O. The present case instead requires: Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths.

C:

Validate zoning, target-LIF visibility and MPIO across both HA controllers and fabrics under a controlled takeover. This responds to another troubleshooting san solutions issue: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Its mechanism is: HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. The present case instead requires: Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths.

D:

Trace that host's WWPN zoning, igroup membership and LUN mapping before altering the storage object. This responds to another troubleshooting san solutions issue: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Its mechanism is: LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. The present case instead requires: Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths.

Question 330

A large SAN rollout creates more discovered target paths than the host supports and causes login instability on multiple servers. Which storage-system mechanism is the decisive factor in this situation?

  1. ALUA communicates optimized versus nonoptimized paths; host multipath selection determines which paths carry routine I/O.
  2. HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller.
  3. Unbounded target discovery can violate host multipath limits even if each individual link works.
  4. LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access.

Explanation

Correct Answer

C:

Unbounded target discovery can violate host multipath limits even if each individual link works. The corrective design is: Limit excessive path exposure with supported zoning, portsets or SLM while retaining eligible redundant paths. A relevant test is: Enumerate host paths before and after scoping and check stable I/O under a single-path failure.

Other Answers

A:

ALUA communicates optimized versus nonoptimized paths; host multipath selection determines which paths carry routine I/O. That mechanism fits a different troubleshooting san solutions failure: A database server uses two ONTAP FC paths but repeatedly chooses a nonoptimized ALUA path after a driver update. Here the decisive mechanism is: Unbounded target discovery can violate host multipath limits even if each individual link works.

B:

HA gives storage ownership to the partner, but missing end-to-end paths prevent the host from using the newly serving controller. That mechanism fits a different troubleshooting san solutions failure: An FC host loses storage during takeover although both controllers have target ports, and analysis finds no permitted path on the alternate fabric. Here the decisive mechanism is: Unbounded target discovery can violate host multipath limits even if each individual link works.

D:

LUN visibility relies on both fabric discovery and authorized initiator mapping; a healthy volume alone does not establish access. That mechanism fits a different troubleshooting san solutions failure: A mapped FC LUN is missing from one host, but other hosts access it; administrators propose recreating the volume before checking zoning. Here the decisive mechanism is: Unbounded target discovery can violate host multipath limits even if each individual link works.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests