McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 32

Question 310

In a separate fictional JNCIS-SP lab review for Crestland Networks 078, a carrier-edge and core routing team, following a monitored network change window, engineers find: An intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected. Which networking principle explains why the proposed correction is appropriate?

  1. IS-IS path calculations depend on compatible advertisements of link metrics.
  2. A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane.
  3. IS-IS routers need consistent flooded LSP information for reliable SPF results.
  4. BGP depends on working IP transport to establish its TCP session.

Explanation

Correct Answer

A:

IS-IS path calculations depend on compatible advertisements of link metrics. All routers compute the expected cost and favor the intended transit route. Align the supported metric style and review full link metrics across the participating routing level.

Incorrect Answers

B:

A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane. This could matter when the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change. In this case, an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

C:

IS-IS routers need consistent flooded LSP information for reliable SPF results. That could help when a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset; here, an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

D:

BGP depends on working IP transport to establish its TCP session. This is applicable when a BGP peer has a correct AS number but cannot connect because its TCP transport address is unreachable; the present condition is that an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

Question 311

In a separate fictional JNCIS-SP lab review for Crestland Networks 078, a carrier-edge and core routing team, following a monitored network change window, engineers find: An intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected. Which validation result would confirm the design is now functioning?

  1. The service route is visible on remote devices while unrelated prefixes remain suppressed.
  2. The adjacency comes up at the planned level and routing information is exchanged correctly.
  3. The route detail identifies the intended contributing prefixes and the summary is active only in the planned circumstances.
  4. All routers compute the expected cost and favor the intended transit route.

Explanation

Correct Answer

D:

All routers compute the expected cost and favor the intended transit route. Align the supported metric style and review full link metrics across the participating routing level. IS-IS path calculations depend on compatible advertisements of link metrics.

Incorrect Answers

A:

The service route is visible on remote devices while unrelated prefixes remain suppressed. That option concerns a customer service route never reaches another IS-IS area because the required export policy omits it. The problem here is different: An intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

B:

The adjacency comes up at the planned level and routing information is exchanged correctly. It addresses a different problem: Two adjacent core routers cannot establish IS-IS because one is configured only for Level 1 and the other only for Level 2. Here, an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

C:

The route detail identifies the intended contributing prefixes and the summary is active only in the planned circumstances. This could matter when a summary prefix is advertised even though operators have not confirmed which customer specifics contribute to it. In this case, an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

Question 312

In a separate fictional JNCIS-SP lab review for Crestland Networks 078, a carrier-edge and core routing team, following a monitored network change window, engineers find: An intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected. What likely service impact does this condition create?

  1. IPv6 traffic fails although the IPv4 IS-IS topology is healthy.
  2. Operations declares recovery while customer packets use a degraded detour.
  3. Traffic unexpectedly overloads a low-capacity link.
  4. Routing connectivity fails or a poorly scoped workaround weakens control-plane trust.

Explanation

Correct Answer

C:

Traffic unexpectedly overloads a low-capacity link. Align the supported metric style and review full link metrics across the participating routing level. IS-IS path calculations depend on compatible advertisements of link metrics.

Incorrect Answers

A:

IPv6 traffic fails although the IPv4 IS-IS topology is healthy. The choice would be appropriate if an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled. Here, an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

B:

Operations declares recovery while customer packets use a degraded detour. That option concerns the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change. The problem here is different: An intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

D:

Routing connectivity fails or a poorly scoped workaround weakens control-plane trust. This could matter when a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree. In this case, an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected.

Question 313

At fictional Silverlake Routing 079, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A customer service route never reaches another IS-IS area because the required export policy omits it. Which configuration or operational correction most directly addresses this failure?

  1. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.
  2. Inspect LSDB entries, SPF route selection, and forwarding next hops instead of relying on neighbor state alone.
  3. Correct the import policy term to reject the unauthorized route while preserving contracted prefixes.
  4. Adjust the intended export policy match and confirm service-prefix advertisement.

Explanation

Correct Answer

D:

Adjust the intended export policy match and confirm service-prefix advertisement. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. The service route is visible on remote devices while unrelated prefixes remain suppressed.

Incorrect Answers

A:

Restore IS-IS operation and appropriate hello behavior on the intended transit interface. This addresses a situation in which an IS-IS neighbor remains down after an interface template disables its hello transmission; however, a customer service route never reaches another IS-IS area because the required export policy omits it.

B:

Inspect LSDB entries, SPF route selection, and forwarding next hops instead of relying on neighbor state alone. The choice would be appropriate if the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change. Here, a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

Correct the import policy term to reject the unauthorized route while preserving contracted prefixes. That option concerns a provider receives a customer-only prefix from a transit peer that should be blocked by an import policy. The problem here is different: A customer service route never reaches another IS-IS area because the required export policy omits it.

Question 314

At fictional Silverlake Routing 079, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A customer service route never reaches another IS-IS area because the required export policy omits it. Which Junos forwarding or control-plane rule applies to this case?

  1. IS-IS carries enabled address-family reachability through appropriate protocol information.
  2. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.
  3. The IS-IS overload indication can discourage transit use during control-plane recovery.
  4. Logical tunnel status alone is insufficient evidence of end-to-end overlay forwarding.

Explanation

Correct Answer

B:

Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. Adjust the intended export policy match and confirm service-prefix advertisement. The service route is visible on remote devices while unrelated prefixes remain suppressed.

Incorrect Answers

A:

IS-IS carries enabled address-family reachability through appropriate protocol information. That relates to circumstances in which an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled. Here the problem is that a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

The IS-IS overload indication can discourage transit use during control-plane recovery. The choice would be appropriate if a newly rebooted core router attracts transit traffic while its forwarding state is still being restored. Here, a customer service route never reaches another IS-IS area because the required export policy omits it.

D:

Logical tunnel status alone is insufficient evidence of end-to-end overlay forwarding. That option concerns monitoring declares a GRE circuit healthy based on logical-interface status while no encapsulated user packets are delivered. The problem here is different: A customer service route never reaches another IS-IS area because the required export policy omits it.

Question 315

At fictional Silverlake Routing 079, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A customer service route never reaches another IS-IS area because the required export policy omits it. What operational evidence best establishes successful remediation?

  1. The planned L1 adjacency forms and the corresponding area information is consistent.
  2. An L1 router installs the intended route toward the L1-L2 boundary and reaches test destinations.
  3. An injected test BPDU triggers the documented protection while legitimate access ports behave normally.
  4. The service route is visible on remote devices while unrelated prefixes remain suppressed.

Explanation

Correct Answer

D:

The service route is visible on remote devices while unrelated prefixes remain suppressed. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. Adjust the intended export policy match and confirm service-prefix advertisement.

Incorrect Answers

A:

The planned L1 adjacency forms and the corresponding area information is consistent. It is useful for situations where a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up; the reported fault, though, is that a customer service route never reaches another IS-IS area because the required export policy omits it.

B:

An L1 router installs the intended route toward the L1-L2 boundary and reaches test destinations. That relates to circumstances in which an L1-only site lacks an approved route to reach destinations in the backbone after a level-transition change. Here the problem is that a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

An injected test BPDU triggers the documented protection while legitimate access ports behave normally. This addresses a situation in which a subscriber accidentally connects a switch that sends BPDUs into a provider edge expected to accept endpoints only; however, a customer service route never reaches another IS-IS area because the required export policy omits it.

Question 316

At fictional Silverlake Routing 079, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A customer service route never reaches another IS-IS area because the required export policy omits it. Which operational harm would persist without the intended correction?

  1. A provider domain becomes partitioned and service prefixes disappear.
  2. An important customer service is unreachable outside its local PE.
  3. Some routers calculate stale paths and cannot reach required loopbacks.
  4. Repeated control-plane resets withdraw customer routes.

Explanation

Correct Answer

B:

An important customer service is unreachable outside its local PE. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. Adjust the intended export policy match and confirm service-prefix advertisement.

Incorrect Answers

A:

A provider domain becomes partitioned and service prefixes disappear. This relates to a case where two adjacent core routers cannot establish IS-IS because one is configured only for Level 1 and the other only for Level 2; the current situation is that a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

Some routers calculate stale paths and cannot reach required loopbacks. That relates to circumstances in which a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Here the problem is that a customer service route never reaches another IS-IS area because the required export policy omits it.

D:

Repeated control-plane resets withdraw customer routes. This addresses a situation in which a neighboring BGP session resets frequently because the timer design is incompatible with observed transport conditions; however, a customer service route never reaches another IS-IS area because the required export policy omits it.

Question 317

In a separate fictional JNCIS-SP lab review for Seabrook Metro 080, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A customer service route never reaches another IS-IS area because the required export policy omits it. What should the Junos specialist change first to resolve this specific fault?

  1. Assign a unique network entity title system identifier and verify database identities.
  2. Inspect LSDB entries, SPF route selection, and forwarding next hops instead of relying on neighbor state alone.
  3. Make the timer settings compatible across the shared link and monitor the neighbor exchange.
  4. Adjust the intended export policy match and confirm service-prefix advertisement.

Explanation

Correct Answer

D:

Adjust the intended export policy match and confirm service-prefix advertisement. The service route is visible on remote devices while unrelated prefixes remain suppressed. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.

Incorrect Answers

A:

Assign a unique network entity title system identifier and verify database identities. This could help if a device cloned from a lab template has the same IS-IS system ID as a production router, but not when a customer service route never reaches another IS-IS area because the required export policy omits it.

B:

Inspect LSDB entries, SPF route selection, and forwarding next hops instead of relying on neighbor state alone. This relates to a case where the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change; the current situation is that a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

Make the timer settings compatible across the shared link and monitor the neighbor exchange. It is useful for situations where OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template; the reported fault, though, is that a customer service route never reaches another IS-IS area because the required export policy omits it.

Question 318

In a separate fictional JNCIS-SP lab review for Seabrook Metro 080, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A customer service route never reaches another IS-IS area because the required export policy omits it. What technical principle underlies the right remedy?

  1. IS-IS path calculations depend on compatible advertisements of link metrics.
  2. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation.
  3. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.
  4. Physical link-up does not imply permission to forward under spanning-tree loop prevention.

Explanation

Correct Answer

C:

Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. The service route is visible on remote devices while unrelated prefixes remain suppressed. Adjust the intended export policy match and confirm service-prefix advertisement.

Incorrect Answers

A:

IS-IS path calculations depend on compatible advertisements of link metrics. It is relevant if an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected, but the reported issue is that a customer service route never reaches another IS-IS area because the required export policy omits it.

B:

IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation. This could help if operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment, but not when a customer service route never reaches another IS-IS area because the required export policy omits it.

D:

Physical link-up does not imply permission to forward under spanning-tree loop prevention. It is useful for situations where a link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics; the reported fault, though, is that a customer service route never reaches another IS-IS area because the required export policy omits it.

Question 319

In a separate fictional JNCIS-SP lab review for Seabrook Metro 080, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A customer service route never reaches another IS-IS area because the required export policy omits it. Which acceptance finding demonstrates the affected service has recovered?

  1. The observed TLV maps to the expected reachability entry without false parser alarms.
  2. The service route is visible on remote devices while unrelated prefixes remain suppressed.
  3. The LSDB lists separate stable system IDs for the two routers.
  4. Remote routers learn intended IPv6 prefixes and forward IPv6 probes end to end.

Explanation

Correct Answer

B:

The service route is visible on remote devices while unrelated prefixes remain suppressed. Adjust the intended export policy match and confirm service-prefix advertisement. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.

Incorrect Answers

A:

The observed TLV maps to the expected reachability entry without false parser alarms. This is applicable when a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team; the present condition is that a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

The LSDB lists separate stable system IDs for the two routers. This could help if a device cloned from a lab template has the same IS-IS system ID as a production router, but not when a customer service route never reaches another IS-IS area because the required export policy omits it.

D:

Remote routers learn intended IPv6 prefixes and forward IPv6 probes end to end. This relates to a case where a core network runs IS-IS for IPv4 but has no IPv6 service reachability after dual-stack activation; the current situation is that a customer service route never reaches another IS-IS area because the required export policy omits it.

Question 320

In a separate fictional JNCIS-SP lab review for Seabrook Metro 080, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A customer service route never reaches another IS-IS area because the required export policy omits it. What is the direct residual network risk if the fault remains unresolved?

  1. An important customer service is unreachable outside its local PE.
  2. Some routers calculate stale paths and cannot reach required loopbacks.
  3. Duplicate identity creates conflicting LSPs and unstable route computation.
  4. Labeled packets are discarded at the affected core node.

Explanation

Correct Answer

A:

An important customer service is unreachable outside its local PE. Adjust the intended export policy match and confirm service-prefix advertisement. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.

Incorrect Answers

B:

Some routers calculate stale paths and cannot reach required loopbacks. This is applicable when a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset; the present condition is that a customer service route never reaches another IS-IS area because the required export policy omits it.

C:

Duplicate identity creates conflicting LSPs and unstable route computation. It is relevant if a device cloned from a lab template has the same IS-IS system ID as a production router, but the reported issue is that a customer service route never reaches another IS-IS area because the required export policy omits it.

D:

Labeled packets are discarded at the affected core node. This could help if an MPLS LSP is reported as configured but the expected outgoing label swap entry is missing, but not when a customer service route never reaches another IS-IS area because the required export policy omits it.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests