McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 30

Question 290

At fictional Stonefield Telecom 073, a regional service-provider network, during a two-site transit migration, operations observes: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Why is this particular correction the best fit for the stated defect?

  1. IS-IS routers need consistent flooded LSP information for reliable SPF results.
  2. IS-IS hello PDUs discover and maintain neighbor relationships.
  3. The IS-IS overload indication can discourage transit use during control-plane recovery.
  4. Generated routes depend on qualifying routes and their configured policy, not merely on a destination name.

Explanation

Correct Answer

A:

IS-IS routers need consistent flooded LSP information for reliable SPF results. Inspect LSDB sequence and flooding state and repair the affected adjacency. The remote LSDB includes the fresh LSP and the loopback route becomes active.

Incorrect Answers

B:

IS-IS hello PDUs discover and maintain neighbor relationships. This addresses a situation in which an IS-IS neighbor remains down after an interface template disables its hello transmission; however, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

The IS-IS overload indication can discourage transit use during control-plane recovery. The choice would be appropriate if a newly rebooted core router attracts transit traffic while its forwarding state is still being restored. Here, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

Generated routes depend on qualifying routes and their configured policy, not merely on a destination name. That option concerns a generated default route unexpectedly disappears after the upstream routing policy rejects its contributing route. The problem here is different: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 291

At fictional Stonefield Telecom 073, a regional service-provider network, during a two-site transit migration, operations observes: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. What direct observation would prove the corrective action worked?

  1. The remote router receives the expected IPv6 IS-IS route and can reach the service.
  2. The remote LSDB includes the fresh LSP and the loopback route becomes active.
  3. The adjacency comes up at the planned level and routing information is exchanged correctly.
  4. The forbidden test prefix is rejected while approved prefixes are accepted.

Explanation

Correct Answer

B:

The remote LSDB includes the fresh LSP and the loopback route becomes active. IS-IS routers need consistent flooded LSP information for reliable SPF results. Inspect LSDB sequence and flooding state and repair the affected adjacency.

Incorrect Answers

A:

The remote router receives the expected IPv6 IS-IS route and can reach the service. It is useful for situations where an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled; the reported fault, though, is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

The adjacency comes up at the planned level and routing information is exchanged correctly. This addresses a situation in which two adjacent core routers cannot establish IS-IS because one is configured only for Level 1 and the other only for Level 2; however, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

The forbidden test prefix is rejected while approved prefixes are accepted. The choice would be appropriate if a broad accept term in a BGP policy is evaluated before a specific reject term, letting unwanted routes through. Here, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 292

At fictional Stonefield Telecom 073, a regional service-provider network, during a two-site transit migration, operations observes: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Which failure consequence follows most closely from ignoring this issue?

  1. A provider domain becomes partitioned and service prefixes disappear.
  2. Operations declares recovery while customer packets use a degraded detour.
  3. Overlay routes remain configured but customer packets never reach the remote site.
  4. Some routers calculate stale paths and cannot reach required loopbacks.

Explanation

Correct Answer

D:

Some routers calculate stale paths and cannot reach required loopbacks. IS-IS routers need consistent flooded LSP information for reliable SPF results. Inspect LSDB sequence and flooding state and repair the affected adjacency.

Incorrect Answers

A:

A provider domain becomes partitioned and service prefixes disappear. This relates to a case where two adjacent core routers cannot establish IS-IS because one is configured only for Level 1 and the other only for Level 2; the current situation is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

B:

Operations declares recovery while customer packets use a degraded detour. It is useful for situations where the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change; the reported fault, though, is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

Overlay routes remain configured but customer packets never reach the remote site. That relates to circumstances in which a configured GRE tunnel stays unusable after the remote outer IP endpoint changes. Here the problem is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 293

In a separate fictional JNCIS-SP lab review for Clearwater Peering 074, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. What intervention most directly restores the intended routing or switching behavior?

  1. Assign a unique network entity title system identifier and verify database identities.
  2. Inspect LSDB entries, SPF route selection, and forwarding next hops instead of relying on neighbor state alone.
  3. Inspect LSDB sequence and flooding state and repair the affected adjacency.
  4. Restrict the discard summary and verify that intended specific routes win for live destinations.

Explanation

Correct Answer

C:

Inspect LSDB sequence and flooding state and repair the affected adjacency. The remote LSDB includes the fresh LSP and the loopback route becomes active. IS-IS routers need consistent flooded LSP information for reliable SPF results.

Incorrect Answers

A:

Assign a unique network entity title system identifier and verify database identities. This could help if a device cloned from a lab template has the same IS-IS system ID as a production router, but not when a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

B:

Inspect LSDB entries, SPF route selection, and forwarding next hops instead of relying on neighbor state alone. This relates to a case where the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change; the current situation is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

Restrict the discard summary and verify that intended specific routes win for live destinations. That relates to circumstances in which a provider adds a discard summary but accidentally makes it cover reachable customer addresses more specific routes have not yet advertised. Here the problem is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 294

In a separate fictional JNCIS-SP lab review for Clearwater Peering 074, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Which networking principle explains why the proposed correction is appropriate?

  1. A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane.
  2. IS-IS routers need consistent flooded LSP information for reliable SPF results.
  3. IS-IS authentication parameters must match for participating routers to exchange protocol information.
  4. IRB traffic must bridge and route within an intentionally consistent service context.

Explanation

Correct Answer

B:

IS-IS routers need consistent flooded LSP information for reliable SPF results. The remote LSDB includes the fresh LSP and the loopback route becomes active. Inspect LSDB sequence and flooding state and repair the affected adjacency.

Incorrect Answers

A:

A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane. It is relevant if the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change, but the reported issue is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

IS-IS authentication parameters must match for participating routers to exchange protocol information. This relates to a case where a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end; the current situation is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

IRB traffic must bridge and route within an intentionally consistent service context. It is useful for situations where an IRB gateway is placed in the default routing instance while its tenant VLAN belongs to a separate virtual switch; the reported fault, though, is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 295

In a separate fictional JNCIS-SP lab review for Clearwater Peering 074, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Which validation result would confirm the design is now functioning?

  1. The remote LSDB includes the fresh LSP and the loopback route becomes active.
  2. The planned L1 adjacency forms and the corresponding area information is consistent.
  3. Peer SPF paths avoid the router while overloaded and normal paths return after it is cleared.
  4. MAC entries stabilize on the intended interface after repairing the bridge path.

Explanation

Correct Answer

A:

The remote LSDB includes the fresh LSP and the loopback route becomes active. Inspect LSDB sequence and flooding state and repair the affected adjacency. IS-IS routers need consistent flooded LSP information for reliable SPF results.

Incorrect Answers

B:

The planned L1 adjacency forms and the corresponding area information is consistent. It is relevant if a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up, but the reported issue is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

Peer SPF paths avoid the router while overloaded and normal paths return after it is cleared. This could help if a newly rebooted core router attracts transit traffic while its forwarding state is still being restored, but not when a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

MAC entries stabilize on the intended interface after repairing the bridge path. This relates to a case where a MAC moves rapidly among provider ports after a cabling change, yet troubleshooting focuses only on IP routing tables; the current situation is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 296

In a separate fictional JNCIS-SP lab review for Clearwater Peering 074, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. What likely service impact does this condition create?

  1. Operators suppress genuine incidents after repeated false IS-IS alerts.
  2. Some routers calculate stale paths and cannot reach required loopbacks.
  3. Duplicate identity creates conflicting LSPs and unstable route computation.
  4. IPv6 service fails across a still-configured but unusable tunnel.

Explanation

Correct Answer

B:

Some routers calculate stale paths and cannot reach required loopbacks. Inspect LSDB sequence and flooding state and repair the affected adjacency. IS-IS routers need consistent flooded LSP information for reliable SPF results.

Incorrect Answers

A:

Operators suppress genuine incidents after repeated false IS-IS alerts. That could help when a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team; here, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

Duplicate identity creates conflicting LSPs and unstable route computation. It is relevant if a device cloned from a lab template has the same IS-IS system ID as a production router, but the reported issue is that a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

IPv6 service fails across a still-configured but unusable tunnel. This could help if an IPv6 service is carried through an IPv4 underlay, but the tunnel endpoint's IPv4 route has disappeared, but not when a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 297

At fictional Glenwood Connectivity 075, a regional service-provider network, during a preproduction design validation, operations observes: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team. Which configuration or operational correction most directly addresses this failure?

  1. Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels.
  2. Validate the TLV and its enabled reachability function against the deployed Junos and protocol family.
  3. Restore suitable L1-L2 connectivity or the documented route-leaking/default behavior.
  4. Correct the import policy term to reject the unauthorized route while preserving contracted prefixes.

Explanation

Correct Answer

B:

Validate the TLV and its enabled reachability function against the deployed Junos and protocol family. IS-IS conveys extensible routing attributes in typed TLVs within protocol packets. The observed TLV maps to the expected reachability entry without false parser alarms.

Incorrect Answers

A:

Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels. This could matter when an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled. In this case, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

C:

Restore suitable L1-L2 connectivity or the documented route-leaking/default behavior. This is applicable when an L1-only site lacks an approved route to reach destinations in the backbone after a level-transition change; the present condition is that a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

D:

Correct the import policy term to reject the unauthorized route while preserving contracted prefixes. It is relevant if a provider receives a customer-only prefix from a transit peer that should be blocked by an import policy, but the reported issue is that a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

Question 298

At fictional Glenwood Connectivity 075, a regional service-provider network, during a preproduction design validation, operations observes: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team. Which Junos forwarding or control-plane rule applies to this case?

  1. IS-IS system IDs must uniquely represent participating routers in the routing domain.
  2. A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane.
  3. IS-IS conveys extensible routing attributes in typed TLVs within protocol packets.
  4. OSPF peers must satisfy the configured authentication requirements to participate.

Explanation

Correct Answer

C:

IS-IS conveys extensible routing attributes in typed TLVs within protocol packets. Validate the TLV and its enabled reachability function against the deployed Junos and protocol family. The observed TLV maps to the expected reachability entry without false parser alarms.

Incorrect Answers

A:

IS-IS system IDs must uniquely represent participating routers in the routing domain. It addresses a different problem: A device cloned from a lab template has the same IS-IS system ID as a production router. Here, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

B:

A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane. This could matter when the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change. In this case, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

D:

OSPF peers must satisfy the configured authentication requirements to participate. This is applicable when a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree; the present condition is that a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

Question 299

At fictional Glenwood Connectivity 075, a regional service-provider network, during a preproduction design validation, operations observes: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team. What operational evidence best establishes successful remediation?

  1. The service route is visible on remote devices while unrelated prefixes remain suppressed.
  2. The observed TLV maps to the expected reachability entry without false parser alarms.
  3. The planned L1 adjacency forms and the corresponding area information is consistent.
  4. A test frame relearns the source MAC and later packets forward as known unicast.

Explanation

Correct Answer

B:

The observed TLV maps to the expected reachability entry without false parser alarms. IS-IS conveys extensible routing attributes in typed TLVs within protocol packets. Validate the TLV and its enabled reachability function against the deployed Junos and protocol family.

Incorrect Answers

A:

The service route is visible on remote devices while unrelated prefixes remain suppressed. That option concerns a customer service route never reaches another IS-IS area because the required export policy omits it. The problem here is different: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

C:

The planned L1 adjacency forms and the corresponding area information is consistent. This could matter when a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up. In this case, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

D:

A test frame relearns the source MAC and later packets forward as known unicast. That could help when a customer observes occasional unknown-unicast flooding after long inactivity and assumes every flood is a loop; here, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

Question 300

At fictional Glenwood Connectivity 075, a regional service-provider network, during a preproduction design validation, operations observes: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team. Which operational harm would persist without the intended correction?

  1. The partially initialized router drops transit packets during planned recovery.
  2. The backbone link stays out of the routing topology or an unsafe bypass is introduced.
  3. Operators suppress genuine incidents after repeated false IS-IS alerts.
  4. An unnoticed bridging loop can trigger widespread broadcast storms.

Explanation

Correct Answer

C:

Operators suppress genuine incidents after repeated false IS-IS alerts. IS-IS conveys extensible routing attributes in typed TLVs within protocol packets. Validate the TLV and its enabled reachability function against the deployed Junos and protocol family.

Incorrect Answers

A:

The partially initialized router drops transit packets during planned recovery. The choice would be appropriate if a newly rebooted core router attracts transit traffic while its forwarding state is still being restored. Here, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

B:

The backbone link stays out of the routing topology or an unsafe bypass is introduced. That option concerns a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end. The problem here is different: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

D:

An unnoticed bridging loop can trigger widespread broadcast storms. This could matter when a switch port connecting another bridge is incorrectly marked as an edge port, weakening normal loop-avoidance behavior. In this case, a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests