McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 29

Question 280

In a separate fictional JNCIS-SP lab review for Orchard Link 070, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An IS-IS neighbor remains down after an interface template disables its hello transmission. What likely service impact does this condition create?

  1. Traffic unexpectedly overloads a low-capacity link.
  2. No adjacency forms, so link-state routes cannot traverse that link.
  3. Intra-area routes never propagate between connected devices.
  4. Customers experience extended blackholes before alternate paths take over.

Explanation

Correct Answer

B:

No adjacency forms, so link-state routes cannot traverse that link. Restore IS-IS operation and appropriate hello behavior on the intended transit interface. IS-IS hello PDUs discover and maintain neighbor relationships.

Incorrect Answers

A:

Traffic unexpectedly overloads a low-capacity link. This relates to a case where an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected; the current situation is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

Intra-area routes never propagate between connected devices. That relates to circumstances in which a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up. Here the problem is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

Customers experience extended blackholes before alternate paths take over. This addresses a situation in which a core route remains active long after a forwarding path fails because the routing protocol's regular timeout is too slow; however, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 281

At fictional Oakshore Peering 071, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. Which configuration or operational correction most directly addresses this failure?

  1. Use the supported IS-IS overload behavior during maintenance and remove it when forwarding readiness is verified.
  2. Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels.
  3. Apply the approved BPDU protection policy to the access edge and test the violation response.
  4. Review DIS selection parameters and verify pseudonode origination for the LAN.

Explanation

Correct Answer

D:

Review DIS selection parameters and verify pseudonode origination for the LAN. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation. Operational output identifies the intended DIS and a stable pseudonode LSP.

Incorrect Answers

A:

Use the supported IS-IS overload behavior during maintenance and remove it when forwarding readiness is verified. This could help if a newly rebooted core router attracts transit traffic while its forwarding state is still being restored, but not when operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

B:

Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels. This relates to a case where an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled; the current situation is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

Apply the approved BPDU protection policy to the access edge and test the violation response. It is useful for situations where a subscriber accidentally connects a switch that sends BPDUs into a provider edge expected to accept endpoints only; the reported fault, though, is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 282

At fictional Oakshore Peering 071, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. Which Junos forwarding or control-plane rule applies to this case?

  1. IS-IS system IDs must uniquely represent participating routers in the routing domain.
  2. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation.
  3. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.
  4. On multiaccess links, not all OSPF neighbors must become fully adjacent to each other.

Explanation

Correct Answer

B:

IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation. Review DIS selection parameters and verify pseudonode origination for the LAN. Operational output identifies the intended DIS and a stable pseudonode LSP.

Incorrect Answers

A:

IS-IS system IDs must uniquely represent participating routers in the routing domain. It is relevant if a device cloned from a lab template has the same IS-IS system ID as a production router, but the reported issue is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. This relates to a case where a customer service route never reaches another IS-IS area because the required export policy omits it; the current situation is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

D:

On multiaccess links, not all OSPF neighbors must become fully adjacent to each other. It is useful for situations where on a broadcast segment, one non-designated router shows a peer at 2-Way and an operator incorrectly treats it as a failure; the reported fault, though, is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 283

At fictional Oakshore Peering 071, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. What operational evidence best establishes successful remediation?

  1. The intended neighbor comes up under the approved authentication settings.
  2. The service route is visible on remote devices while unrelated prefixes remain suppressed.
  3. The target loopback FEC has a valid binding and corresponding programmed label action.
  4. Operational output identifies the intended DIS and a stable pseudonode LSP.

Explanation

Correct Answer

D:

Operational output identifies the intended DIS and a stable pseudonode LSP. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation. Review DIS selection parameters and verify pseudonode origination for the LAN.

Incorrect Answers

A:

The intended neighbor comes up under the approved authentication settings. This is applicable when a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end; the present condition is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

B:

The service route is visible on remote devices while unrelated prefixes remain suppressed. It is relevant if a customer service route never reaches another IS-IS area because the required export policy omits it, but the reported issue is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

The target loopback FEC has a valid binding and corresponding programmed label action. This could help if monitoring checks only LDP adjacency state and never detects missing forwarding labels for a critical PE loopback, but not when operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 284

At fictional Oakshore Peering 071, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. Which operational harm would persist without the intended correction?

  1. Operations declares recovery while customer packets use a degraded detour.
  2. The backbone link stays out of the routing topology or an unsafe bypass is introduced.
  3. Unplanned DIS churn produces extra flooding and convergence disruption.
  4. Customer switching devices can influence provider spanning-tree topology.

Explanation

Correct Answer

C:

Unplanned DIS churn produces extra flooding and convergence disruption. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation. Review DIS selection parameters and verify pseudonode origination for the LAN.

Incorrect Answers

A:

Operations declares recovery while customer packets use a degraded detour. That could help when the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change; here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

B:

The backbone link stays out of the routing topology or an unsafe bypass is introduced. This is applicable when a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end; the present condition is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

D:

Customer switching devices can influence provider spanning-tree topology. This could help if a subscriber accidentally connects a switch that sends BPDUs into a provider edge expected to accept endpoints only, but not when operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 285

In a separate fictional JNCIS-SP lab review for Brookridge Metro 072, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. What should the Junos specialist change first to resolve this specific fault?

  1. Review DIS selection parameters and verify pseudonode origination for the LAN.
  2. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.
  3. Validate the TLV and its enabled reachability function against the deployed Junos and protocol family.
  4. Restore the intended more-specific route and diagnose forwarding with a longest-prefix-match lookup.

Explanation

Correct Answer

A:

Review DIS selection parameters and verify pseudonode origination for the LAN. Operational output identifies the intended DIS and a stable pseudonode LSP. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation.

Incorrect Answers

B:

Restore IS-IS operation and appropriate hello behavior on the intended transit interface. That could help when an IS-IS neighbor remains down after an interface template disables its hello transmission; here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

Validate the TLV and its enabled reachability function against the deployed Junos and protocol family. This is applicable when a monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team; the present condition is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

D:

Restore the intended more-specific route and diagnose forwarding with a longest-prefix-match lookup. It is relevant if an operator changes route preference to make a broader prefix override a healthy more-specific prefix, but the reported issue is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 286

In a separate fictional JNCIS-SP lab review for Brookridge Metro 072, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. What technical principle underlies the right remedy?

  1. IS-IS levels separate routing scope and require a deliberate interlevel reachability design.
  2. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation.
  3. IS-IS hello PDUs discover and maintain neighbor relationships.
  4. Ethernet bridges learn source MAC locations to forward known unicast traffic efficiently.

Explanation

Correct Answer

B:

IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation. Operational output identifies the intended DIS and a stable pseudonode LSP. Review DIS selection parameters and verify pseudonode origination for the LAN.

Incorrect Answers

A:

IS-IS levels separate routing scope and require a deliberate interlevel reachability design. It addresses a different problem: An L1-only site lacks an approved route to reach destinations in the backbone after a level-transition change. Here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

IS-IS hello PDUs discover and maintain neighbor relationships. That could help when an IS-IS neighbor remains down after an interface template disables its hello transmission; here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

D:

Ethernet bridges learn source MAC locations to forward known unicast traffic efficiently. This is applicable when an edge switch floods ordinary known unicast frames because it never learns the destination MAC on the expected port; the present condition is that operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 287

In a separate fictional JNCIS-SP lab review for Brookridge Metro 072, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. Which acceptance finding demonstrates the affected service has recovered?

  1. Operational output identifies the intended DIS and a stable pseudonode LSP.
  2. The expected neighbor appears with stable hold time and correct interface state.
  3. All routers compute the expected cost and favor the intended transit route.
  4. The affected VLAN has the desired root and its forwarding path recovers.

Explanation

Correct Answer

A:

Operational output identifies the intended DIS and a stable pseudonode LSP. Review DIS selection parameters and verify pseudonode origination for the LAN. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation.

Incorrect Answers

B:

The expected neighbor appears with stable hold time and correct interface state. It addresses a different problem: An IS-IS neighbor remains down after an interface template disables its hello transmission. Here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

All routers compute the expected cost and favor the intended transit route. This could matter when an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected. In this case, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

D:

The affected VLAN has the desired root and its forwarding path recovers. That could help when one VLAN becomes unavailable after administrators assume the same spanning-tree root applies identically to all VLANs; here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 288

In a separate fictional JNCIS-SP lab review for Brookridge Metro 072, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment. What is the direct residual network risk if the fault remains unresolved?

  1. Some routers calculate stale paths and cannot reach required loopbacks.
  2. Intra-area routes never propagate between connected devices.
  3. IPv6 routing does not converge across the link.
  4. Unplanned DIS churn produces extra flooding and convergence disruption.

Explanation

Correct Answer

D:

Unplanned DIS churn produces extra flooding and convergence disruption. Review DIS selection parameters and verify pseudonode origination for the LAN. IS-IS elects a designated intermediate system on broadcast networks to manage pseudonode representation.

Incorrect Answers

A:

Some routers calculate stale paths and cannot reach required loopbacks. The choice would be appropriate if a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

B:

Intra-area routes never propagate between connected devices. That option concerns a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up. The problem here is different: Operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

C:

IPv6 routing does not converge across the link. It addresses a different problem: An IPv6 prefix is missing across a point-to-point link because OSPFv2 was configured but OSPFv3 was omitted. Here, operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment.

Question 289

At fictional Stonefield Telecom 073, a regional service-provider network, during a two-site transit migration, operations observes: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Which targeted remediation best fits the reported behavior?

  1. Assign a unique network entity title system identifier and verify database identities.
  2. Correct area address design or the adjacency level according to the provider topology.
  3. Inspect LSDB sequence and flooding state and repair the affected adjacency.
  4. Inspect full route attributes and the BGP decision outcome for all candidate paths.

Explanation

Correct Answer

C:

Inspect LSDB sequence and flooding state and repair the affected adjacency. IS-IS routers need consistent flooded LSP information for reliable SPF results. The remote LSDB includes the fresh LSP and the loopback route becomes active.

Incorrect Answers

A:

Assign a unique network entity title system identifier and verify database identities. This addresses a situation in which a device cloned from a lab template has the same IS-IS system ID as a production router; however, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

B:

Correct area address design or the adjacency level according to the provider topology. The choice would be appropriate if a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up. Here, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

Inspect full route attributes and the BGP decision outcome for all candidate paths. It addresses a different problem: A prefix switches BGP best paths and operators cannot explain the result because only peer state is monitored. Here, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Question 290

At fictional Stonefield Telecom 073, a regional service-provider network, during a two-site transit migration, operations observes: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset. Why is this particular correction the best fit for the stated defect?

  1. IS-IS routers need consistent flooded LSP information for reliable SPF results.
  2. IS-IS hello PDUs discover and maintain neighbor relationships.
  3. The IS-IS overload indication can discourage transit use during control-plane recovery.
  4. Generated routes depend on qualifying routes and their configured policy, not merely on a destination name.

Explanation

Correct Answer

A:

IS-IS routers need consistent flooded LSP information for reliable SPF results. Inspect LSDB sequence and flooding state and repair the affected adjacency. The remote LSDB includes the fresh LSP and the loopback route becomes active.

Incorrect Answers

B:

IS-IS hello PDUs discover and maintain neighbor relationships. This addresses a situation in which an IS-IS neighbor remains down after an interface template disables its hello transmission; however, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

C:

The IS-IS overload indication can discourage transit use during control-plane recovery. The choice would be appropriate if a newly rebooted core router attracts transit traffic while its forwarding state is still being restored. Here, a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

D:

Generated routes depend on qualifying routes and their configured policy, not merely on a destination name. That option concerns a generated default route unexpectedly disappears after the upstream routing policy rejects its contributing route. The problem here is different: A remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests