McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 28

Question 270

In a separate fictional JNCIS-SP lab review for Brightstone Backbone 068, a carrier-edge and core routing team, following a monitored network change window, engineers find: An IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled. What technical principle underlies the right remedy?

  1. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.
  2. IS-IS carries enabled address-family reachability through appropriate protocol information.
  3. IS-IS path calculations depend on compatible advertisements of link metrics.
  4. Link-local IPv6 addresses are scoped to a link and require an appropriate interface context.

Explanation

Correct Answer

B:

IS-IS carries enabled address-family reachability through appropriate protocol information. The remote router receives the expected IPv6 IS-IS route and can reach the service. Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels.

Incorrect Answers

A:

Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. It is relevant if a customer service route never reaches another IS-IS area because the required export policy omits it, but the reported issue is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

C:

IS-IS path calculations depend on compatible advertisements of link metrics. This relates to a case where an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected; the current situation is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

D:

Link-local IPv6 addresses are scoped to a link and require an appropriate interface context. It is useful for situations where an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design; the reported fault, though, is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

Question 271

In a separate fictional JNCIS-SP lab review for Brightstone Backbone 068, a carrier-edge and core routing team, following a monitored network change window, engineers find: An IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled. Which acceptance finding demonstrates the affected service has recovered?

  1. The planned L1 adjacency forms and the corresponding area information is consistent.
  2. The remote LSDB includes the fresh LSP and the loopback route becomes active.
  3. During a staged failover, probes reach the customer service within the approved recovery threshold.
  4. The remote router receives the expected IPv6 IS-IS route and can reach the service.

Explanation

Correct Answer

D:

The remote router receives the expected IPv6 IS-IS route and can reach the service. Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels. IS-IS carries enabled address-family reachability through appropriate protocol information.

Incorrect Answers

A:

The planned L1 adjacency forms and the corresponding area information is consistent. This is applicable when a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up; the present condition is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

B:

The remote LSDB includes the fresh LSP and the loopback route becomes active. It is relevant if a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset, but the reported issue is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

C:

During a staged failover, probes reach the customer service within the approved recovery threshold. This could help if an availability test is signed off because BFD and VRRP report healthy, but customer packets still drop during failover, but not when an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

Question 272

In a separate fictional JNCIS-SP lab review for Brightstone Backbone 068, a carrier-edge and core routing team, following a monitored network change window, engineers find: An IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled. What is the direct residual network risk if the fault remains unresolved?

  1. IPv6 traffic fails although the IPv4 IS-IS topology is healthy.
  2. An important customer service is unreachable outside its local PE.
  3. Intra-area routes never propagate between connected devices.
  4. MPLS traffic remains broken despite restored IGP neighbors.

Explanation

Correct Answer

A:

IPv6 traffic fails although the IPv4 IS-IS topology is healthy. Configure the supported IPv6 IS-IS family and confirm prefix reachability at intended levels. IS-IS carries enabled address-family reachability through appropriate protocol information.

Incorrect Answers

B:

An important customer service is unreachable outside its local PE. This is applicable when a customer service route never reaches another IS-IS area because the required export policy omits it; the present condition is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

C:

Intra-area routes never propagate between connected devices. It is relevant if a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up, but the reported issue is that an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

D:

MPLS traffic remains broken despite restored IGP neighbors. This could help if after an IGP reconvergence, an old MPLS label still points to a failed interface on one transit device, but not when an IPv6 service prefix is missing from an IS-IS network because the necessary topology and family capability were not enabled.

Question 273

At fictional Eastbridge Networks 069, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An IS-IS neighbor remains down after an interface template disables its hello transmission. Which targeted remediation best fits the reported behavior?

  1. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.
  2. Adjust the intended export policy match and confirm service-prefix advertisement.
  3. Review DIS selection parameters and verify pseudonode origination for the LAN.
  4. Set deliberate interface priorities and confirm the DR and BDR roles after a controlled election.

Explanation

Correct Answer

A:

Restore IS-IS operation and appropriate hello behavior on the intended transit interface. IS-IS hello PDUs discover and maintain neighbor relationships. The expected neighbor appears with stable hold time and correct interface state.

Incorrect Answers

B:

Adjust the intended export policy match and confirm service-prefix advertisement. That could help when a customer service route never reaches another IS-IS area because the required export policy omits it; here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

Review DIS selection parameters and verify pseudonode origination for the LAN. This is applicable when operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment; the present condition is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

Set deliberate interface priorities and confirm the DR and BDR roles after a controlled election. It is relevant if an unplanned access router becomes designated router after its interface receives an unexpectedly high priority, but the reported issue is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 274

At fictional Eastbridge Networks 069, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An IS-IS neighbor remains down after an interface template disables its hello transmission. Why is this particular correction the best fit for the stated defect?

  1. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.
  2. IS-IS neighbors require compatible level participation to exchange link-state information.
  3. A RIB group permits specifically configured routes to be installed into additional routing tables.
  4. IS-IS hello PDUs discover and maintain neighbor relationships.

Explanation

Correct Answer

D:

IS-IS hello PDUs discover and maintain neighbor relationships. Restore IS-IS operation and appropriate hello behavior on the intended transit interface. The expected neighbor appears with stable hold time and correct interface state.

Incorrect Answers

A:

Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. It addresses a different problem: A customer service route never reaches another IS-IS area because the required export policy omits it. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

B:

IS-IS neighbors require compatible level participation to exchange link-state information. This could matter when two adjacent core routers cannot establish IS-IS because one is configured only for Level 1 and the other only for Level 2. In this case, an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

A RIB group permits specifically configured routes to be installed into additional routing tables. That could help when a route intended for a monitoring routing table is missing because the RIB group does not include the recipient table; here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 275

At fictional Eastbridge Networks 069, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An IS-IS neighbor remains down after an interface template disables its hello transmission. What direct observation would prove the corrective action worked?

  1. The expected neighbor appears with stable hold time and correct interface state.
  2. The observed TLV maps to the expected reachability entry without false parser alarms.
  3. The route table and forwarding lookup show the expected metric-driven next hop.
  4. The customer MAC is relearned on the authorized new handoff interface.

Explanation

Correct Answer

A:

The expected neighbor appears with stable hold time and correct interface state. IS-IS hello PDUs discover and maintain neighbor relationships. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.

Incorrect Answers

B:

The observed TLV maps to the expected reachability entry without false parser alarms. It addresses a different problem: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

The route table and forwarding lookup show the expected metric-driven next hop. This could matter when the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change. In this case, an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

The customer MAC is relearned on the authorized new handoff interface. That could help when a MAC is learned on an unexpected aggregation interface following a customer circuit move; here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 276

At fictional Eastbridge Networks 069, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An IS-IS neighbor remains down after an interface template disables its hello transmission. Which failure consequence follows most closely from ignoring this issue?

  1. Operations declares recovery while customer packets use a degraded detour.
  2. No adjacency forms, so link-state routes cannot traverse that link.
  3. Operators suppress genuine incidents after repeated false IS-IS alerts.
  4. A route loop or false path preference persists due to misdiagnosis.

Explanation

Correct Answer

B:

No adjacency forms, so link-state routes cannot traverse that link. IS-IS hello PDUs discover and maintain neighbor relationships. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.

Incorrect Answers

A:

Operations declares recovery while customer packets use a degraded detour. The choice would be appropriate if the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

Operators suppress genuine incidents after repeated false IS-IS alerts. It addresses a different problem: A monitoring parser treats a valid IS-IS reachability TLV as an unsupported fault and pages the operations team. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

A route loop or false path preference persists due to misdiagnosis. This could matter when an engineer blames BGP route rejection on local preference while a route carries an unexpected autonomous-system path. In this case, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 277

In a separate fictional JNCIS-SP lab review for Orchard Link 070, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An IS-IS neighbor remains down after an interface template disables its hello transmission. What intervention most directly restores the intended routing or switching behavior?

  1. Assign a unique network entity title system identifier and verify database identities.
  2. Restore suitable L1-L2 connectivity or the documented route-leaking/default behavior.
  3. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.
  4. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds.

Explanation

Correct Answer

C:

Restore IS-IS operation and appropriate hello behavior on the intended transit interface. The expected neighbor appears with stable hold time and correct interface state. IS-IS hello PDUs discover and maintain neighbor relationships.

Incorrect Answers

A:

Assign a unique network entity title system identifier and verify database identities. This addresses a situation in which a device cloned from a lab template has the same IS-IS system ID as a production router; however, an IS-IS neighbor remains down after an interface template disables its hello transmission.

B:

Restore suitable L1-L2 connectivity or the documented route-leaking/default behavior. The choice would be appropriate if an L1-only site lacks an approved route to reach destinations in the backbone after a level-transition change. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. It addresses a different problem: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 278

In a separate fictional JNCIS-SP lab review for Orchard Link 070, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An IS-IS neighbor remains down after an interface template disables its hello transmission. Which networking principle explains why the proposed correction is appropriate?

  1. IS-IS hello PDUs discover and maintain neighbor relationships.
  2. IS-IS authentication parameters must match for participating routers to exchange protocol information.
  3. Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS.
  4. OSPF interface network type influences neighbor discovery and DR behavior.

Explanation

Correct Answer

A:

IS-IS hello PDUs discover and maintain neighbor relationships. The expected neighbor appears with stable hold time and correct interface state. Restore IS-IS operation and appropriate hello behavior on the intended transit interface.

Incorrect Answers

B:

IS-IS authentication parameters must match for participating routers to exchange protocol information. This addresses a situation in which a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end; however, an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

Route policy controls which eligible nonnative prefixes are intentionally originated into IS-IS. The choice would be appropriate if a customer service route never reaches another IS-IS area because the required export policy omits it. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

OSPF interface network type influences neighbor discovery and DR behavior. That option concerns OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology. The problem here is different: An IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 279

In a separate fictional JNCIS-SP lab review for Orchard Link 070, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An IS-IS neighbor remains down after an interface template disables its hello transmission. Which validation result would confirm the design is now functioning?

  1. All routers compute the expected cost and favor the intended transit route.
  2. The expected neighbor appears with stable hold time and correct interface state.
  3. Operational output identifies the intended DIS and a stable pseudonode LSP.
  4. BGP and IGP neighbors remain stable through a controlled Routing Engine switchover.

Explanation

Correct Answer

B:

The expected neighbor appears with stable hold time and correct interface state. Restore IS-IS operation and appropriate hello behavior on the intended transit interface. IS-IS hello PDUs discover and maintain neighbor relationships.

Incorrect Answers

A:

All routers compute the expected cost and favor the intended transit route. It is useful for situations where an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected; the reported fault, though, is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

Operational output identifies the intended DIS and a stable pseudonode LSP. This addresses a situation in which operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment; however, an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

BGP and IGP neighbors remain stable through a controlled Routing Engine switchover. The choice would be appropriate if traffic briefly vanishes after a Routing Engine failure because the backup does not maintain protocol state. Here, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Question 280

In a separate fictional JNCIS-SP lab review for Orchard Link 070, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An IS-IS neighbor remains down after an interface template disables its hello transmission. What likely service impact does this condition create?

  1. Traffic unexpectedly overloads a low-capacity link.
  2. No adjacency forms, so link-state routes cannot traverse that link.
  3. Intra-area routes never propagate between connected devices.
  4. Customers experience extended blackholes before alternate paths take over.

Explanation

Correct Answer

B:

No adjacency forms, so link-state routes cannot traverse that link. Restore IS-IS operation and appropriate hello behavior on the intended transit interface. IS-IS hello PDUs discover and maintain neighbor relationships.

Incorrect Answers

A:

Traffic unexpectedly overloads a low-capacity link. This relates to a case where an intended core link metric is truncated by a mismatched metric-style design and fails to shift paths as expected; the current situation is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

C:

Intra-area routes never propagate between connected devices. That relates to circumstances in which a Level 1 IS-IS adjacency fails between routers with different area addresses even though the physical link is up. Here the problem is that an IS-IS neighbor remains down after an interface template disables its hello transmission.

D:

Customers experience extended blackholes before alternate paths take over. This addresses a situation in which a core route remains active long after a forwarding path fails because the routing protocol's regular timeout is too slow; however, an IS-IS neighbor remains down after an interface template disables its hello transmission.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests