McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 49

Question 480

A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. What control should the team keep after the corrective change has passed testing?

  1. Alert on actual replication lag and transfer failures in addition to schedule existence.
  2. Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.
  3. Run periodic label-to-policy coverage audits and alert on missing recovery generations.
  4. Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

Explanation

Correct Answer

D:

Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion. This addresses the recurring cause: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. It keeps the accepted correction in place: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.

Other Answers

A:

Alert on actual replication lag and transfer failures in addition to schedule existence. This safeguard targets a different repeat failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. For the present risk, the necessary control is: Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

B:

Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks. This safeguard targets a different repeat failure: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. For the present risk, the necessary control is: Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

C:

Run periodic label-to-policy coverage audits and alert on missing recovery generations. This safeguard targets a different repeat failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. For the present risk, the necessary control is: Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

Question 481

A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Which change most directly meets the stated storage requirement?

  1. Inspect intercluster LIF connectivity, cluster peering and SVM peering before modifying NAS authorization.
  2. Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.
  3. Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.
  4. Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth.

Explanation

Correct Answer

C:

Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan. SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. Acceptance requires: Create labeled sample snapshots and verify each required class appears at the destination with expected retention.

Other Answers

A:

Inspect intercluster LIF connectivity, cluster peering and SVM peering before modifying NAS authorization. This responds to another troubleshooting data protection issue: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. Its mechanism is: SnapMirror transfers depend on intercluster network paths and peering; local NFS export rules do not repair unreachable peer clusters. The present case instead requires: Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.

B:

Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction. This responds to another troubleshooting data protection issue: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Its mechanism is: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. The present case instead requires: Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.

D:

Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth. This responds to another troubleshooting data protection issue: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Its mechanism is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. The present case instead requires: Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.

Question 482

A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Why would the proposed setup fail to provide the stated behavior?

  1. SnapMirror transfers depend on intercluster network paths and peering; local NFS export rules do not repair unreachable peer clusters.
  2. SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.
  3. After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.
  4. An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.

Explanation

Correct Answer

B:

SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. The corrective design is: Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan. A relevant test is: Create labeled sample snapshots and verify each required class appears at the destination with expected retention.

Other Answers

A:

SnapMirror transfers depend on intercluster network paths and peering; local NFS export rules do not repair unreachable peer clusters. That mechanism fits a different troubleshooting data protection failure: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. Here the decisive mechanism is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.

C:

After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. That mechanism fits a different troubleshooting data protection failure: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Here the decisive mechanism is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.

D:

An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. That mechanism fits a different troubleshooting data protection failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Here the decisive mechanism is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.

Question 483

A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Which result should be required before the storage change is accepted?

  1. Create labeled sample snapshots and verify each required class appears at the destination with expected retention.
  2. Test intercluster route/port reachability and peer health, then confirm initialization starts.
  3. Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.
  4. Create a source test change and record its arrival at the destination against the required interval.

Explanation

Correct Answer

A:

Create labeled sample snapshots and verify each required class appears at the destination with expected retention. This checks whether the remediation works: Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan. The governing behavior is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.

Other Answers

B:

Test intercluster route/port reachability and peer health, then confirm initialization starts. That check tests the separate condition: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. It would not establish the required result here: Create labeled sample snapshots and verify each required class appears at the destination with expected retention.

C:

Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection. That check tests the separate condition: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. It would not establish the required result here: Create labeled sample snapshots and verify each required class appears at the destination with expected retention.

D:

Create a source test change and record its arrival at the destination against the required interval. That check tests the separate condition: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. It would not establish the required result here: Create labeled sample snapshots and verify each required class appears at the destination with expected retention.

Question 484

A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Which durable operational control best prevents this issue from recurring?

  1. Monitor intercluster LIF availability and peer status after firewall changes.
  2. Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.
  3. Run periodic label-to-policy coverage audits and alert on missing recovery generations.
  4. Alert on actual replication lag and transfer failures in addition to schedule existence.

Explanation

Correct Answer

C:

Run periodic label-to-policy coverage audits and alert on missing recovery generations. This addresses the recurring cause: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. It keeps the accepted correction in place: Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.

Other Answers

A:

Monitor intercluster LIF availability and peer status after firewall changes. This safeguard targets a different repeat failure: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. For the present risk, the necessary control is: Run periodic label-to-policy coverage audits and alert on missing recovery generations.

B:

Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks. This safeguard targets a different repeat failure: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. For the present risk, the necessary control is: Run periodic label-to-policy coverage audits and alert on missing recovery generations.

D:

Alert on actual replication lag and transfer failures in addition to schedule existence. This safeguard targets a different repeat failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. For the present risk, the necessary control is: Run periodic label-to-policy coverage audits and alert on missing recovery generations.

Question 485

A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. What should the administrator implement first to address the underlying gap?

  1. Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.
  2. Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.
  3. Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth.
  4. Choose a verified clean recovery point and validate restored content before returning clients to production.

Explanation

Correct Answer

D:

Choose a verified clean recovery point and validate restored content before returning clients to production. Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline. Acceptance requires: Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.

Other Answers

A:

Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost. This responds to another troubleshooting data protection issue: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Its mechanism is: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. The present case instead requires: Choose a verified clean recovery point and validate restored content before returning clients to production.

B:

Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan. This responds to another troubleshooting data protection issue: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Its mechanism is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. The present case instead requires: Choose a verified clean recovery point and validate restored content before returning clients to production.

C:

Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth. This responds to another troubleshooting data protection issue: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Its mechanism is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. The present case instead requires: Choose a verified clean recovery point and validate restored content before returning clients to production.

Question 486

A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. Which storage-system mechanism is the decisive factor in this situation?

  1. Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.
  2. Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline.
  3. SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.
  4. An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.

Explanation

Correct Answer

B:

Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline. The corrective design is: Choose a verified clean recovery point and validate restored content before returning clients to production. A relevant test is: Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.

Other Answers

A:

Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. That mechanism fits a different troubleshooting data protection failure: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Here the decisive mechanism is: Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline.

C:

SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. That mechanism fits a different troubleshooting data protection failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Here the decisive mechanism is: Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline.

D:

An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. That mechanism fits a different troubleshooting data protection failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Here the decisive mechanism is: Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline.

Question 487

A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. Which test would directly demonstrate that the required behavior now works?

  1. Inspect source/destination snapshot names and verify a supported resync completes with correct data.
  2. Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.
  3. Create labeled sample snapshots and verify each required class appears at the destination with expected retention.
  4. Create a source test change and record its arrival at the destination against the required interval.

Explanation

Correct Answer

B:

Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence. This checks whether the remediation works: Choose a verified clean recovery point and validate restored content before returning clients to production. The governing behavior is: Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline.

Other Answers

A:

Inspect source/destination snapshot names and verify a supported resync completes with correct data. That check tests the separate condition: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. It would not establish the required result here: Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.

C:

Create labeled sample snapshots and verify each required class appears at the destination with expected retention. That check tests the separate condition: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. It would not establish the required result here: Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.

D:

Create a source test change and record its arrival at the destination against the required interval. That check tests the separate condition: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. It would not establish the required result here: Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.

Question 488

A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. What ongoing safeguard should be added to the ONTAP change process?

  1. Keep incident recovery procedures that require integrity checks and isolated testing of restoration points.
  2. Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.
  3. Run periodic label-to-policy coverage audits and alert on missing recovery generations.
  4. Alert on actual replication lag and transfer failures in addition to schedule existence.

Explanation

Correct Answer

A:

Keep incident recovery procedures that require integrity checks and isolated testing of restoration points. This addresses the recurring cause: Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline. It keeps the accepted correction in place: Choose a verified clean recovery point and validate restored content before returning clients to production.

Other Answers

B:

Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion. This safeguard targets a different repeat failure: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. For the present risk, the necessary control is: Keep incident recovery procedures that require integrity checks and isolated testing of restoration points.

C:

Run periodic label-to-policy coverage audits and alert on missing recovery generations. This safeguard targets a different repeat failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. For the present risk, the necessary control is: Keep incident recovery procedures that require integrity checks and isolated testing of restoration points.

D:

Alert on actual replication lag and transfer failures in addition to schedule existence. This safeguard targets a different repeat failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. For the present risk, the necessary control is: Keep incident recovery procedures that require integrity checks and isolated testing of restoration points.

Question 489

An NFS export permits AUTH_SYS to an untrusted shared subnet, but a project mandates cryptographic identity assurance for sensitive shares. Which proposed action best resolves the specific issue without broadening access or risk?

  1. Configure supported NFS Kerberos security flavors and restrict export-policy client and authentication matches.
  2. Use uniquely attributable identities and approved SMB authentication with least-privilege group grants.
  3. Restrict the matching NFS export policy to authorized client networks and security types.
  4. Review NFS root-user mapping and limit any `superuser` permissions to specifically trusted client identities.

Explanation

Correct Answer

A:

Configure supported NFS Kerberos security flavors and restrict export-policy client and authentication matches. AUTH_SYS largely trusts client-supplied UID/GID values; Kerberos can provide stronger authenticated principal identity. Acceptance requires: Mount with the intended Kerberos flavor and verify unauthenticated or wrong-flavor access is denied.

Other Answers

B:

Use uniquely attributable identities and approved SMB authentication with least-privilege group grants. This responds to another protocol security issue: An enterprise plans to use a shared SMB account for all file operations, undermining traceability even with correct share ACLs. Its mechanism is: Shared logins obscure which principal accessed or changed files and widen the compromise blast radius. The present case instead requires: Configure supported NFS Kerberos security flavors and restrict export-policy client and authentication matches.

C:

Restrict the matching NFS export policy to authorized client networks and security types. This responds to another protocol security issue: An ONTAP NAS server allows NFS access from all IP addresses when only a defined research subnet should read a sensitive export. Its mechanism is: Export policies can enforce client address and authentication constraints before file permissions grant access. The present case instead requires: Configure supported NFS Kerberos security flavors and restrict export-policy client and authentication matches.

D:

Review NFS root-user mapping and limit any `superuser` permissions to specifically trusted client identities. This responds to another protocol security issue: A Linux host authenticates to an NFS export but local root on the client unexpectedly receives anonymous permissions on the server, and an administrator wants to grant root to every machine. Its mechanism is: NFS export rules can map client root credentials to an anonymous identity, reducing the effect of untrusted remote root. The present case instead requires: Configure supported NFS Kerberos security flavors and restrict export-policy client and authentication matches.

Question 490

An NFS export permits AUTH_SYS to an untrusted shared subnet, but a project mandates cryptographic identity assurance for sensitive shares. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. Shared logins obscure which principal accessed or changed files and widen the compromise blast radius.
  2. AUTH_SYS largely trusts client-supplied UID/GID values; Kerberos can provide stronger authenticated principal identity.
  3. Export policies can enforce client address and authentication constraints before file permissions grant access.
  4. NFS export rules can map client root credentials to an anonymous identity, reducing the effect of untrusted remote root.

Explanation

Correct Answer

B:

AUTH_SYS largely trusts client-supplied UID/GID values; Kerberos can provide stronger authenticated principal identity. The corrective design is: Configure supported NFS Kerberos security flavors and restrict export-policy client and authentication matches. A relevant test is: Mount with the intended Kerberos flavor and verify unauthenticated or wrong-flavor access is denied.

Other Answers

A:

Shared logins obscure which principal accessed or changed files and widen the compromise blast radius. That mechanism fits a different protocol security failure: An enterprise plans to use a shared SMB account for all file operations, undermining traceability even with correct share ACLs. Here the decisive mechanism is: AUTH_SYS largely trusts client-supplied UID/GID values; Kerberos can provide stronger authenticated principal identity.

C:

Export policies can enforce client address and authentication constraints before file permissions grant access. That mechanism fits a different protocol security failure: An ONTAP NAS server allows NFS access from all IP addresses when only a defined research subnet should read a sensitive export. Here the decisive mechanism is: AUTH_SYS largely trusts client-supplied UID/GID values; Kerberos can provide stronger authenticated principal identity.

D:

NFS export rules can map client root credentials to an anonymous identity, reducing the effect of untrusted remote root. That mechanism fits a different protocol security failure: A Linux host authenticates to an NFS export but local root on the client unexpectedly receives anonymous permissions on the server, and an administrator wants to grant root to every machine. Here the decisive mechanism is: AUTH_SYS largely trusts client-supplied UID/GID values; Kerberos can provide stronger authenticated principal identity.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests