McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 48

Question 470

An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Which storage-system mechanism is the decisive factor in this situation?

  1. Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.
  2. SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.
  3. An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.
  4. SnapMirror transfers depend on intercluster network paths and peering; local NFS export rules do not repair unreachable peer clusters.

Explanation

Correct Answer

C:

An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. The corrective design is: Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth. A relevant test is: Create a source test change and record its arrival at the destination against the required interval.

Other Answers

A:

Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. That mechanism fits a different troubleshooting data protection failure: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Here the decisive mechanism is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.

B:

SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. That mechanism fits a different troubleshooting data protection failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Here the decisive mechanism is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.

D:

SnapMirror transfers depend on intercluster network paths and peering; local NFS export rules do not repair unreachable peer clusters. That mechanism fits a different troubleshooting data protection failure: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. Here the decisive mechanism is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.

Question 471

An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Which test would directly demonstrate that the required behavior now works?

  1. Inspect source/destination snapshot names and verify a supported resync completes with correct data.
  2. Create a source test change and record its arrival at the destination against the required interval.
  3. Create labeled sample snapshots and verify each required class appears at the destination with expected retention.
  4. Test intercluster route/port reachability and peer health, then confirm initialization starts.

Explanation

Correct Answer

B:

Create a source test change and record its arrival at the destination against the required interval. This checks whether the remediation works: Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth. The governing behavior is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.

Other Answers

A:

Inspect source/destination snapshot names and verify a supported resync completes with correct data. That check tests the separate condition: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. It would not establish the required result here: Create a source test change and record its arrival at the destination against the required interval.

C:

Create labeled sample snapshots and verify each required class appears at the destination with expected retention. That check tests the separate condition: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. It would not establish the required result here: Create a source test change and record its arrival at the destination against the required interval.

D:

Test intercluster route/port reachability and peer health, then confirm initialization starts. That check tests the separate condition: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. It would not establish the required result here: Create a source test change and record its arrival at the destination against the required interval.

Question 472

An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. What ongoing safeguard should be added to the ONTAP change process?

  1. Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.
  2. Run periodic label-to-policy coverage audits and alert on missing recovery generations.
  3. Alert on actual replication lag and transfer failures in addition to schedule existence.
  4. Monitor intercluster LIF availability and peer status after firewall changes.

Explanation

Correct Answer

C:

Alert on actual replication lag and transfer failures in addition to schedule existence. This addresses the recurring cause: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. It keeps the accepted correction in place: Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth.

Other Answers

A:

Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion. This safeguard targets a different repeat failure: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. For the present risk, the necessary control is: Alert on actual replication lag and transfer failures in addition to schedule existence.

B:

Run periodic label-to-policy coverage audits and alert on missing recovery generations. This safeguard targets a different repeat failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. For the present risk, the necessary control is: Alert on actual replication lag and transfer failures in addition to schedule existence.

D:

Monitor intercluster LIF availability and peer status after firewall changes. This safeguard targets a different repeat failure: SnapMirror initialization fails with an unreachable destination, but local NAS traffic is normal and an engineer changes the source volume's export policy. For the present risk, the necessary control is: Alert on actual replication lag and transfer failures in addition to schedule existence.

Question 473

A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Which proposed action best resolves the specific issue without broadening access or risk?

  1. Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.
  2. Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.
  3. Choose a verified clean recovery point and validate restored content before returning clients to production.
  4. Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.

Explanation

Correct Answer

D:

Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction. After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. Acceptance requires: Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.

Other Answers

A:

Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost. This responds to another troubleshooting data protection issue: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Its mechanism is: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. The present case instead requires: Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.

B:

Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan. This responds to another troubleshooting data protection issue: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Its mechanism is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. The present case instead requires: Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.

C:

Choose a verified clean recovery point and validate restored content before returning clients to production. This responds to another troubleshooting data protection issue: A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. Its mechanism is: Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline. The present case instead requires: Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.

Question 474

A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.
  2. After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.
  3. SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.
  4. Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline.

Explanation

Correct Answer

B:

After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. The corrective design is: Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction. A relevant test is: Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.

Other Answers

A:

Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. That mechanism fits a different troubleshooting data protection failure: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Here the decisive mechanism is: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.

C:

SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. That mechanism fits a different troubleshooting data protection failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Here the decisive mechanism is: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.

D:

Snapshot existence alone cannot establish data integrity relative to a ransomware attack timeline. That mechanism fits a different troubleshooting data protection failure: A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. Here the decisive mechanism is: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.

Question 475

A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Which observation provides the strongest evidence that the issue was corrected?

  1. Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.
  2. Inspect source/destination snapshot names and verify a supported resync completes with correct data.
  3. Create labeled sample snapshots and verify each required class appears at the destination with expected retention.
  4. Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence.

Explanation

Correct Answer

A:

Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection. This checks whether the remediation works: Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction. The governing behavior is: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.

Other Answers

B:

Inspect source/destination snapshot names and verify a supported resync completes with correct data. That check tests the separate condition: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. It would not establish the required result here: Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.

C:

Create labeled sample snapshots and verify each required class appears at the destination with expected retention. That check tests the separate condition: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. It would not establish the required result here: Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.

D:

Restore a bounded sample from candidate snapshots and scan/compare it with known-clean evidence. That check tests the separate condition: A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. It would not establish the required result here: Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.

Question 476

A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Which preventive practice most directly reduces recurrence of this failure?

  1. Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.
  2. Run periodic label-to-policy coverage audits and alert on missing recovery generations.
  3. Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.
  4. Keep incident recovery procedures that require integrity checks and isolated testing of restoration points.

Explanation

Correct Answer

C:

Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks. This addresses the recurring cause: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. It keeps the accepted correction in place: Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.

Other Answers

A:

Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion. This safeguard targets a different repeat failure: A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. For the present risk, the necessary control is: Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.

B:

Run periodic label-to-policy coverage audits and alert on missing recovery generations. This safeguard targets a different repeat failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. For the present risk, the necessary control is: Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.

D:

Keep incident recovery procedures that require integrity checks and isolated testing of restoration points. This safeguard targets a different repeat failure: A security incident prompts a storage restore, but the available snapshots might have been captured after the malicious encryption event. For the present risk, the necessary control is: Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.

Question 477

A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Which ONTAP administration step most directly corrects this failure?

  1. Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.
  2. Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth.
  3. Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction.
  4. Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan.

Explanation

Correct Answer

A:

Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost. Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. Acceptance requires: Inspect source/destination snapshot names and verify a supported resync completes with correct data.

Other Answers

B:

Compare the relationship's latest transfer state and lag with the configured schedule and observed bandwidth. This responds to another troubleshooting data protection issue: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Its mechanism is: An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. The present case instead requires: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.

C:

Plan the supported SnapMirror resynchronization or reverse-resync workflow after determining authoritative data direction. This responds to another troubleshooting data protection issue: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Its mechanism is: After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. The present case instead requires: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.

D:

Align the destination SnapMirror policy's retention rules with the source snapshot labels required by the backup plan. This responds to another troubleshooting data protection issue: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Its mechanism is: SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. The present case instead requires: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.

Question 478

A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. Which technical distinction most directly explains the observed result?

  1. An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need.
  2. After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled.
  3. Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.
  4. SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention.

Explanation

Correct Answer

C:

Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. The corrective design is: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost. A relevant test is: Inspect source/destination snapshot names and verify a supported resync completes with correct data.

Other Answers

A:

An async relationship can be healthy while still behind an application RPO because transfer timing differs from business need. That mechanism fits a different troubleshooting data protection failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. Here the decisive mechanism is: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.

B:

After a mirror is broken and the destination accepts writes, replication direction and a common recovery base must be reconciled. That mechanism fits a different troubleshooting data protection failure: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. Here the decisive mechanism is: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.

D:

SnapMirror vault selection relies on matching labels/rules; a healthy transfer of other snapshots does not prove weekly retention. That mechanism fits a different troubleshooting data protection failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. Here the decisive mechanism is: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.

Question 479

A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. What check best verifies this change under the stated operating conditions?

  1. Inspect source/destination snapshot names and verify a supported resync completes with correct data.
  2. Create a source test change and record its arrival at the destination against the required interval.
  3. Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection.
  4. Create labeled sample snapshots and verify each required class appears at the destination with expected retention.

Explanation

Correct Answer

A:

Inspect source/destination snapshot names and verify a supported resync completes with correct data. This checks whether the remediation works: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost. The governing behavior is: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer.

Other Answers

B:

Create a source test change and record its arrival at the destination against the required interval. That check tests the separate condition: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. It would not establish the required result here: Inspect source/destination snapshot names and verify a supported resync completes with correct data.

C:

Rehearse the approved resync on a test relationship and compare source/destination data before reactivating production protection. That check tests the separate condition: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. It would not establish the required result here: Inspect source/destination snapshot names and verify a supported resync completes with correct data.

D:

Create labeled sample snapshots and verify each required class appears at the destination with expected retention. That check tests the separate condition: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. It would not establish the required result here: Inspect source/destination snapshot names and verify a supported resync completes with correct data.

Question 480

A scheduled SnapMirror update fails because a required common snapshot was removed; the operator restarts the schedule without examining relationship health. What control should the team keep after the corrective change has passed testing?

  1. Alert on actual replication lag and transfer failures in addition to schedule existence.
  2. Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks.
  3. Run periodic label-to-policy coverage audits and alert on missing recovery generations.
  4. Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

Explanation

Correct Answer

D:

Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion. This addresses the recurring cause: Incremental replication depends on consistent snapshot lineage; a missing common point can block incremental transfer. It keeps the accepted correction in place: Investigate the common snapshot and use a supported resync or rebaseline strategy when relationship continuity is lost.

Other Answers

A:

Alert on actual replication lag and transfer failures in addition to schedule existence. This safeguard targets a different repeat failure: An asynchronous SnapMirror update completes late but the policy's schedule was never checked against its RPO, prompting an incorrect claim that no update occurred. For the present risk, the necessary control is: Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

B:

Maintain decision points for the authoritative recovery copy and data-loss assessment in DR runbooks. This safeguard targets a different repeat failure: A destination was made writable during disaster recovery, and the administrator expects replication to resume normally when the old source returns without resynchronization. For the present risk, the necessary control is: Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

C:

Run periodic label-to-policy coverage audits and alert on missing recovery generations. This safeguard targets a different repeat failure: A remote backup target reports missing weekly recovery points although daily copies arrive; its policy and source snapshots use different labels. For the present risk, the necessary control is: Monitor snapshot retention dependencies for replication policies and prohibit unsafe deletion.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests