McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 42

Question 410

An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.
  2. A remote vault policy preserves selected historical snapshots on another system; a local-only policy leaves the failure domain unchanged.
  3. Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.
  4. Different SnapMirror policies determine which source snapshots are replicated and how many are retained remotely.

Explanation

Correct Answer

A:

Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system. The corrective design is: Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots. A relevant test is: Fail over a test workload to the secondary system after simulating source-site unavailability.

Other Answers

B:

A remote vault policy preserves selected historical snapshots on another system; a local-only policy leaves the failure domain unchanged. That mechanism fits a different ontap data protection solutions failure: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. Here the decisive mechanism is: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.

C:

Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data. That mechanism fits a different ontap data protection solutions failure: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. Here the decisive mechanism is: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.

D:

Different SnapMirror policies determine which source snapshots are replicated and how many are retained remotely. That mechanism fits a different ontap data protection solutions failure: An archival department requires many historical daily and weekly recovery points, but the proposed SnapMirror policy retains only the latest mirrored active file system. Here the decisive mechanism is: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.

Question 411

An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Which observation provides the strongest evidence that the issue was corrected?

  1. Verify required labeled recovery points exist on the destination and test a sample historical file restore.
  2. Fail over a test workload to the secondary system after simulating source-site unavailability.
  3. Inspect the initialization job and verify the destination has the expected baseline data and relationship state.
  4. Create labeled daily/weekly test snapshots and verify the destination keeps the mandated generations.

Explanation

Correct Answer

B:

Fail over a test workload to the secondary system after simulating source-site unavailability. This checks whether the remediation works: Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots. The governing behavior is: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.

Other Answers

A:

Verify required labeled recovery points exist on the destination and test a sample historical file restore. That check tests the separate condition: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. It would not establish the required result here: Fail over a test workload to the secondary system after simulating source-site unavailability.

C:

Inspect the initialization job and verify the destination has the expected baseline data and relationship state. That check tests the separate condition: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. It would not establish the required result here: Fail over a test workload to the secondary system after simulating source-site unavailability.

D:

Create labeled daily/weekly test snapshots and verify the destination keeps the mandated generations. That check tests the separate condition: An archival department requires many historical daily and weekly recovery points, but the proposed SnapMirror policy retains only the latest mirrored active file system. It would not establish the required result here: Fail over a test workload to the secondary system after simulating source-site unavailability.

Question 412

An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Which preventive practice most directly reduces recurrence of this failure?

  1. Track offsite replication health and conduct separate local-restore versus site-recovery drills.
  2. Review destination retention and isolated recovery access against the retention contract.
  3. Require a completed baseline check before marking any new SnapMirror protection policy active.
  4. Audit snapshot labels and remote-retention rules when protection requirements change.

Explanation

Correct Answer

A:

Track offsite replication health and conduct separate local-restore versus site-recovery drills. This addresses the recurring cause: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system. It keeps the accepted correction in place: Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots.

Other Answers

B:

Review destination retention and isolated recovery access against the retention contract. This safeguard targets a different repeat failure: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. For the present risk, the necessary control is: Track offsite replication health and conduct separate local-restore versus site-recovery drills.

C:

Require a completed baseline check before marking any new SnapMirror protection policy active. This safeguard targets a different repeat failure: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. For the present risk, the necessary control is: Track offsite replication health and conduct separate local-restore versus site-recovery drills.

D:

Audit snapshot labels and remote-retention rules when protection requirements change. This safeguard targets a different repeat failure: An archival department requires many historical daily and weekly recovery points, but the proposed SnapMirror policy retains only the latest mirrored active file system. For the present risk, the necessary control is: Track offsite replication health and conduct separate local-restore versus site-recovery drills.

Question 413

A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. Which ONTAP administration step most directly corrects this failure?

  1. Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots.
  2. Initialize the configured relationship after completing required cluster and SVM peering.
  3. Evaluate supported SVM disaster recovery to replicate the required SVM configuration and associated volumes.
  4. Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag.

Explanation

Correct Answer

B:

Initialize the configured relationship after completing required cluster and SVM peering. Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data. Acceptance requires: Inspect the initialization job and verify the destination has the expected baseline data and relationship state.

Other Answers

A:

Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots. This responds to another ontap data protection solutions issue: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Its mechanism is: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system. The present case instead requires: Initialize the configured relationship after completing required cluster and SVM peering.

C:

Evaluate supported SVM disaster recovery to replicate the required SVM configuration and associated volumes. This responds to another ontap data protection solutions issue: A disaster-recovery SVM needs more than its data volumes restored; the team proposes a set of uncoordinated volume mirrors while overlooking service configuration. Its mechanism is: SVM DR can transfer an SVM's data and supported configuration, unlike independently mirroring only content volumes. The present case instead requires: Initialize the configured relationship after completing required cluster and SVM peering.

D:

Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag. This responds to another ontap data protection solutions issue: A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. Its mechanism is: Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary. The present case instead requires: Initialize the configured relationship after completing required cluster and SVM peering.

Question 414

A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. Which technical distinction most directly explains the observed result?

  1. Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.
  2. SVM DR can transfer an SVM's data and supported configuration, unlike independently mirroring only content volumes.
  3. Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary.
  4. Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.

Explanation

Correct Answer

D:

Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data. The corrective design is: Initialize the configured relationship after completing required cluster and SVM peering. A relevant test is: Inspect the initialization job and verify the destination has the expected baseline data and relationship state.

Other Answers

A:

Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system. That mechanism fits a different ontap data protection solutions failure: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Here the decisive mechanism is: Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.

B:

SVM DR can transfer an SVM's data and supported configuration, unlike independently mirroring only content volumes. That mechanism fits a different ontap data protection solutions failure: A disaster-recovery SVM needs more than its data volumes restored; the team proposes a set of uncoordinated volume mirrors while overlooking service configuration. Here the decisive mechanism is: Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.

C:

Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary. That mechanism fits a different ontap data protection solutions failure: A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. Here the decisive mechanism is: Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.

Question 415

A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. What check best verifies this change under the stated operating conditions?

  1. Fail over a test workload to the secondary system after simulating source-site unavailability.
  2. Inspect the initialization job and verify the destination has the expected baseline data and relationship state.
  3. Run a controlled destination activation test and confirm configured network/protocol services are available as designed.
  4. Insert a timed test record and measure its presence at the destination within the required RPO.

Explanation

Correct Answer

B:

Inspect the initialization job and verify the destination has the expected baseline data and relationship state. This checks whether the remediation works: Initialize the configured relationship after completing required cluster and SVM peering. The governing behavior is: Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.

Other Answers

A:

Fail over a test workload to the secondary system after simulating source-site unavailability. That check tests the separate condition: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. It would not establish the required result here: Inspect the initialization job and verify the destination has the expected baseline data and relationship state.

C:

Run a controlled destination activation test and confirm configured network/protocol services are available as designed. That check tests the separate condition: A disaster-recovery SVM needs more than its data volumes restored; the team proposes a set of uncoordinated volume mirrors while overlooking service configuration. It would not establish the required result here: Inspect the initialization job and verify the destination has the expected baseline data and relationship state.

D:

Insert a timed test record and measure its presence at the destination within the required RPO. That check tests the separate condition: A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. It would not establish the required result here: Inspect the initialization job and verify the destination has the expected baseline data and relationship state.

Question 416

A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. What control should the team keep after the corrective change has passed testing?

  1. Track offsite replication health and conduct separate local-restore versus site-recovery drills.
  2. Maintain an SVM-DR configuration coverage and version-compatibility checklist.
  3. Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance.
  4. Require a completed baseline check before marking any new SnapMirror protection policy active.

Explanation

Correct Answer

D:

Require a completed baseline check before marking any new SnapMirror protection policy active. This addresses the recurring cause: Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data. It keeps the accepted correction in place: Initialize the configured relationship after completing required cluster and SVM peering.

Other Answers

A:

Track offsite replication health and conduct separate local-restore versus site-recovery drills. This safeguard targets a different repeat failure: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. For the present risk, the necessary control is: Require a completed baseline check before marking any new SnapMirror protection policy active.

B:

Maintain an SVM-DR configuration coverage and version-compatibility checklist. This safeguard targets a different repeat failure: A disaster-recovery SVM needs more than its data volumes restored; the team proposes a set of uncoordinated volume mirrors while overlooking service configuration. For the present risk, the necessary control is: Require a completed baseline check before marking any new SnapMirror protection policy active.

C:

Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance. This safeguard targets a different repeat failure: A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. For the present risk, the necessary control is: Require a completed baseline check before marking any new SnapMirror protection policy active.

Question 417

A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. Which change most directly meets the stated storage requirement?

  1. Initialize the configured relationship after completing required cluster and SVM peering.
  2. Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots.
  3. Implement supported remote vault-style SnapMirror protection with retention matching the compliance requirement.
  4. Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag.

Explanation

Correct Answer

D:

Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag. Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary. Acceptance requires: Insert a timed test record and measure its presence at the destination within the required RPO.

Other Answers

A:

Initialize the configured relationship after completing required cluster and SVM peering. This responds to another ontap data protection solutions issue: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. Its mechanism is: Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data. The present case instead requires: Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag.

B:

Configure an appropriate remote SnapMirror relationship and prove destination recoverability in addition to local snapshots. This responds to another ontap data protection solutions issue: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Its mechanism is: Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system. The present case instead requires: Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag.

C:

Implement supported remote vault-style SnapMirror protection with retention matching the compliance requirement. This responds to another ontap data protection solutions issue: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. Its mechanism is: A remote vault policy preserves selected historical snapshots on another system; a local-only policy leaves the failure domain unchanged. The present case instead requires: Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag.

Question 418

A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. Why would the proposed setup fail to provide the stated behavior?

  1. Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data.
  2. Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary.
  3. Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system.
  4. A remote vault policy preserves selected historical snapshots on another system; a local-only policy leaves the failure domain unchanged.

Explanation

Correct Answer

B:

Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary. The corrective design is: Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag. A relevant test is: Insert a timed test record and measure its presence at the destination within the required RPO.

Other Answers

A:

Initialization performs the baseline snapshot/block transfer; relationship creation alone does not transfer source data. That mechanism fits a different ontap data protection solutions failure: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. Here the decisive mechanism is: Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary.

C:

Local snapshots reference the same storage failure domain; remote replication places recoverable data on another system. That mechanism fits a different ontap data protection solutions failure: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. Here the decisive mechanism is: Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary.

D:

A remote vault policy preserves selected historical snapshots on another system; a local-only policy leaves the failure domain unchanged. That mechanism fits a different ontap data protection solutions failure: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. Here the decisive mechanism is: Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary.

Question 419

A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. Which result should be required before the storage change is accepted?

  1. Inspect the initialization job and verify the destination has the expected baseline data and relationship state.
  2. Fail over a test workload to the secondary system after simulating source-site unavailability.
  3. Verify required labeled recovery points exist on the destination and test a sample historical file restore.
  4. Insert a timed test record and measure its presence at the destination within the required RPO.

Explanation

Correct Answer

D:

Insert a timed test record and measure its presence at the destination within the required RPO. This checks whether the remediation works: Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag. The governing behavior is: Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary.

Other Answers

A:

Inspect the initialization job and verify the destination has the expected baseline data and relationship state. That check tests the separate condition: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. It would not establish the required result here: Insert a timed test record and measure its presence at the destination within the required RPO.

B:

Fail over a test workload to the secondary system after simulating source-site unavailability. That check tests the separate condition: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. It would not establish the required result here: Insert a timed test record and measure its presence at the destination within the required RPO.

C:

Verify required labeled recovery points exist on the destination and test a sample historical file restore. That check tests the separate condition: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. It would not establish the required result here: Insert a timed test record and measure its presence at the destination within the required RPO.

Question 420

A finance dataset has stringent recovery point requirements, but its protection uses one scheduled asynchronous copy per day. Which durable operational control best prevents this issue from recurring?

  1. Require a completed baseline check before marking any new SnapMirror protection policy active.
  2. Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance.
  3. Track offsite replication health and conduct separate local-restore versus site-recovery drills.
  4. Review destination retention and isolated recovery access against the retention contract.

Explanation

Correct Answer

B:

Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance. This addresses the recurring cause: Asynchronous replication is subject to transfer scheduling and completion, so its recoverable point may lag the primary. It keeps the accepted correction in place: Choose a replication mode or transfer schedule whose supported RPO meets the business requirement and verify actual lag.

Other Answers

A:

Require a completed baseline check before marking any new SnapMirror protection policy active. This safeguard targets a different repeat failure: A replication administrator creates a SnapMirror relationship between clusters but leaves it uninitialized and reports that no secondary data is available. For the present risk, the necessary control is: Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance.

C:

Track offsite replication health and conduct separate local-restore versus site-recovery drills. This safeguard targets a different repeat failure: An engineering team creates a daily local Snapshot policy but assumes it provides disaster recovery after the entire storage site is lost. For the present risk, the necessary control is: Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance.

D:

Review destination retention and isolated recovery access against the retention contract. This safeguard targets a different repeat failure: A protected NAS volume's snapshots are all stored locally, but the compliance team needs an independent retention copy with multiple generations. For the present risk, the necessary control is: Monitor actual replication lag rather than assuming a configured schedule proves RPO compliance.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests