McAfee Secured

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

100% Network Appliance NS0-165 Guaranteed Success With Testking Training Materials

Get Real NS0-165 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 40

Question 390

An NFS user can read but not write to an export after a client subnet change, while the filesystem's UNIX mode bits remain writable. Why would the proposed setup fail to provide the stated behavior?

  1. Export-policy permissions can deny writes despite permissive local UNIX mode bits.
  2. NFS authorization along a mounted namespace can depend on export rules beyond the final directory alone.
  3. Hostname-based export matching may require DNS lookups; stale PTR/A records can prevent the intended client rule match.
  4. SMB authentication and connection target names depend on consistent name resolution and server identity.

Explanation

Correct Answer

A:

Export-policy permissions can deny writes despite permissive local UNIX mode bits. The corrective design is: Review export policy `rwrule`, clientmatch and security flavor for the new source address. A relevant test is: Test read and write from the new subnet and compare the first matching export rule with the original subnet.

Other Answers

B:

NFS authorization along a mounted namespace can depend on export rules beyond the final directory alone. That mechanism fits a different troubleshooting nas solutions failure: An NFSv4 client authenticates correctly but cannot traverse to a child volume below an SVM namespace junction. Here the decisive mechanism is: Export-policy permissions can deny writes despite permissive local UNIX mode bits.

C:

Hostname-based export matching may require DNS lookups; stale PTR/A records can prevent the intended client rule match. That mechanism fits a different troubleshooting nas solutions failure: A Linux NFS client intermittently fails to mount a hostname-based export policy after DNS reverse records change. Here the decisive mechanism is: Export-policy permissions can deny writes despite permissive local UNIX mode bits.

D:

SMB authentication and connection target names depend on consistent name resolution and server identity. That mechanism fits a different troubleshooting nas solutions failure: An SMB file server joined a new AD domain but Windows clients still use a cached legacy name that resolves to an obsolete LIF. Here the decisive mechanism is: Export-policy permissions can deny writes despite permissive local UNIX mode bits.

Question 391

An NFS user can read but not write to an export after a client subnet change, while the filesystem's UNIX mode bits remain writable. Which result should be required before the storage change is accepted?

  1. Mount from a permitted identity and test traverse/read at each junction component.
  2. Test name resolution and an IP/CIDR-matched control export to isolate DNS from protocol service.
  3. Compare the expected server name, resolved data LIF and authenticated SMB session after cache refresh.
  4. Test read and write from the new subnet and compare the first matching export rule with the original subnet.

Explanation

Correct Answer

D:

Test read and write from the new subnet and compare the first matching export rule with the original subnet. This checks whether the remediation works: Review export policy `rwrule`, clientmatch and security flavor for the new source address. The governing behavior is: Export-policy permissions can deny writes despite permissive local UNIX mode bits.

Other Answers

A:

Mount from a permitted identity and test traverse/read at each junction component. That check tests the separate condition: An NFSv4 client authenticates correctly but cannot traverse to a child volume below an SVM namespace junction. It would not establish the required result here: Test read and write from the new subnet and compare the first matching export rule with the original subnet.

B:

Test name resolution and an IP/CIDR-matched control export to isolate DNS from protocol service. That check tests the separate condition: A Linux NFS client intermittently fails to mount a hostname-based export policy after DNS reverse records change. It would not establish the required result here: Test read and write from the new subnet and compare the first matching export rule with the original subnet.

C:

Compare the expected server name, resolved data LIF and authenticated SMB session after cache refresh. That check tests the separate condition: An SMB file server joined a new AD domain but Windows clients still use a cached legacy name that resolves to an obsolete LIF. It would not establish the required result here: Test read and write from the new subnet and compare the first matching export rule with the original subnet.

Question 392

An NFS user can read but not write to an export after a client subnet change, while the filesystem's UNIX mode bits remain writable. Which durable operational control best prevents this issue from recurring?

  1. Include parent/child junction traversal in NFS export acceptance testing.
  2. Prefer stable approved client match formats and monitor DNS dependencies for NFS access.
  3. Treat SMB server renames as identity/DNS changes with client rollback steps.
  4. Add client subnet changes to export-policy impact analyses.

Explanation

Correct Answer

D:

Add client subnet changes to export-policy impact analyses. This addresses the recurring cause: Export-policy permissions can deny writes despite permissive local UNIX mode bits. It keeps the accepted correction in place: Review export policy `rwrule`, clientmatch and security flavor for the new source address.

Other Answers

A:

Include parent/child junction traversal in NFS export acceptance testing. This safeguard targets a different repeat failure: An NFSv4 client authenticates correctly but cannot traverse to a child volume below an SVM namespace junction. For the present risk, the necessary control is: Add client subnet changes to export-policy impact analyses.

B:

Prefer stable approved client match formats and monitor DNS dependencies for NFS access. This safeguard targets a different repeat failure: A Linux NFS client intermittently fails to mount a hostname-based export policy after DNS reverse records change. For the present risk, the necessary control is: Add client subnet changes to export-policy impact analyses.

C:

Treat SMB server renames as identity/DNS changes with client rollback steps. This safeguard targets a different repeat failure: An SMB file server joined a new AD domain but Windows clients still use a cached legacy name that resolves to an obsolete LIF. For the present risk, the necessary control is: Add client subnet changes to export-policy impact analyses.

Question 393

A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. What should the administrator implement first to address the underlying gap?

  1. Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.
  2. Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it.
  3. Configure supported bucket sizing, policy and S3 operational monitoring appropriate to object storage.
  4. Update the application to use the newly issued ONTAP S3 access key and secret for the authorized object user.

Explanation

Correct Answer

A:

Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets. An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist. Acceptance requires: Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.

Other Answers

B:

Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it. This responds to another ontap s3 solutions issue: A cloud backup application demands object versioning and Object Lock but its proposed target is an ONTAP S3 NAS bucket whose available APIs differ from native buckets. Its mechanism is: ONTAP native S3 buckets and NAS-backed S3 access can differ in supported versioning and object-lock operations. The present case instead requires: Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.

C:

Configure supported bucket sizing, policy and S3 operational monitoring appropriate to object storage. This responds to another ontap s3 solutions issue: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. Its mechanism is: S3 objects are stored by bucket/key rather than traditional nested files; NAS quota assumptions do not automatically establish bucket governance. The present case instead requires: Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.

D:

Update the application to use the newly issued ONTAP S3 access key and secret for the authorized object user. This responds to another ontap s3 solutions issue: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. Its mechanism is: S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity. The present case instead requires: Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.

Question 394

A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. Which storage-system mechanism is the decisive factor in this situation?

  1. ONTAP native S3 buckets and NAS-backed S3 access can differ in supported versioning and object-lock operations.
  2. S3 objects are stored by bucket/key rather than traditional nested files; NAS quota assumptions do not automatically establish bucket governance.
  3. S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity.
  4. An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist.

Explanation

Correct Answer

D:

An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist. The corrective design is: Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets. A relevant test is: Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.

Other Answers

A:

ONTAP native S3 buckets and NAS-backed S3 access can differ in supported versioning and object-lock operations. That mechanism fits a different ontap s3 solutions failure: A cloud backup application demands object versioning and Object Lock but its proposed target is an ONTAP S3 NAS bucket whose available APIs differ from native buckets. Here the decisive mechanism is: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist.

B:

S3 objects are stored by bucket/key rather than traditional nested files; NAS quota assumptions do not automatically establish bucket governance. That mechanism fits a different ontap s3 solutions failure: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. Here the decisive mechanism is: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist.

C:

S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity. That mechanism fits a different ontap s3 solutions failure: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. Here the decisive mechanism is: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist.

Question 395

A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. Which test would directly demonstrate that the required behavior now works?

  1. Call the required S3 API in a supported test environment and verify version/object-lock behavior before migration.
  2. Write a bounded object fixture, verify its bucket namespace access and inspect bucket capacity usage.
  3. Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.
  4. Issue a signed test GET and PUT with the new credential and confirm the revoked key is rejected.

Explanation

Correct Answer

C:

Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object. This checks whether the remediation works: Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets. The governing behavior is: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist.

Other Answers

A:

Call the required S3 API in a supported test environment and verify version/object-lock behavior before migration. That check tests the separate condition: A cloud backup application demands object versioning and Object Lock but its proposed target is an ONTAP S3 NAS bucket whose available APIs differ from native buckets. It would not establish the required result here: Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.

B:

Write a bounded object fixture, verify its bucket namespace access and inspect bucket capacity usage. That check tests the separate condition: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. It would not establish the required result here: Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.

D:

Issue a signed test GET and PUT with the new credential and confirm the revoked key is rejected. That check tests the separate condition: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. It would not establish the required result here: Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.

Question 396

A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. What ongoing safeguard should be added to the ONTAP change process?

  1. Keep an application-to-bucket-mode compatibility matrix for protected S3 workloads.
  2. Include S3 server/LIF/version support in object-storage onboarding.
  3. Track per-bucket capacity and policy changes alongside S3 API error rates.
  4. Track S3 access key lifecycle and test application credential rotation before deactivating the previous key.

Explanation

Correct Answer

B:

Include S3 server/LIF/version support in object-storage onboarding. This addresses the recurring cause: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist. It keeps the accepted correction in place: Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.

Other Answers

A:

Keep an application-to-bucket-mode compatibility matrix for protected S3 workloads. This safeguard targets a different repeat failure: A cloud backup application demands object versioning and Object Lock but its proposed target is an ONTAP S3 NAS bucket whose available APIs differ from native buckets. For the present risk, the necessary control is: Include S3 server/LIF/version support in object-storage onboarding.

C:

Track per-bucket capacity and policy changes alongside S3 API error rates. This safeguard targets a different repeat failure: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. For the present risk, the necessary control is: Include S3 server/LIF/version support in object-storage onboarding.

D:

Track S3 access key lifecycle and test application credential rotation before deactivating the previous key. This safeguard targets a different repeat failure: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. For the present risk, the necessary control is: Include S3 server/LIF/version support in object-storage onboarding.

Question 397

An ONTAP S3 bucket exists, but a service account receives AccessDenied because administrators assume SMB ACLs grant bucket writes. Which proposed action best resolves the specific issue without broadening access or risk?

  1. Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.
  2. Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions.
  3. Configure supported bucket sizing, policy and S3 operational monitoring appropriate to object storage.
  4. Update the application to use the newly issued ONTAP S3 access key and secret for the authorized object user.

Explanation

Correct Answer

B:

Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions. S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace. Acceptance requires: Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests.

Other Answers

A:

Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets. This responds to another ontap s3 solutions issue: A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. Its mechanism is: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist. The present case instead requires: Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions.

C:

Configure supported bucket sizing, policy and S3 operational monitoring appropriate to object storage. This responds to another ontap s3 solutions issue: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. Its mechanism is: S3 objects are stored by bucket/key rather than traditional nested files; NAS quota assumptions do not automatically establish bucket governance. The present case instead requires: Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions.

D:

Update the application to use the newly issued ONTAP S3 access key and secret for the authorized object user. This responds to another ontap s3 solutions issue: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. Its mechanism is: S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity. The present case instead requires: Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions.

Question 398

An ONTAP S3 bucket exists, but a service account receives AccessDenied because administrators assume SMB ACLs grant bucket writes. Which ONTAP behavior explains why the original approach does not meet the requirement?

  1. An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist.
  2. S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace.
  3. S3 objects are stored by bucket/key rather than traditional nested files; NAS quota assumptions do not automatically establish bucket governance.
  4. S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity.

Explanation

Correct Answer

B:

S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace. The corrective design is: Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions. A relevant test is: Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests.

Other Answers

A:

An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist. That mechanism fits a different ontap s3 solutions failure: A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. Here the decisive mechanism is: S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace.

C:

S3 objects are stored by bucket/key rather than traditional nested files; NAS quota assumptions do not automatically establish bucket governance. That mechanism fits a different ontap s3 solutions failure: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. Here the decisive mechanism is: S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace.

D:

S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity. That mechanism fits a different ontap s3 solutions failure: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. Here the decisive mechanism is: S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace.

Question 399

An ONTAP S3 bucket exists, but a service account receives AccessDenied because administrators assume SMB ACLs grant bucket writes. Which observation provides the strongest evidence that the issue was corrected?

  1. Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object.
  2. Write a bounded object fixture, verify its bucket namespace access and inspect bucket capacity usage.
  3. Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests.
  4. Issue a signed test GET and PUT with the new credential and confirm the revoked key is rejected.

Explanation

Correct Answer

C:

Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests. This checks whether the remediation works: Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions. The governing behavior is: S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace.

Other Answers

A:

Authenticate to the expected S3 endpoint and successfully create and retrieve an approved test object. That check tests the separate condition: A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. It would not establish the required result here: Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests.

B:

Write a bounded object fixture, verify its bucket namespace access and inspect bucket capacity usage. That check tests the separate condition: An administrator creates several ONTAP S3 buckets without any object namespace policy or capacity alert, expecting directory-level NAS quotas to govern them automatically. It would not establish the required result here: Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests.

D:

Issue a signed test GET and PUT with the new credential and confirm the revoked key is rejected. That check tests the separate condition: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. It would not establish the required result here: Use the app's S3 access credentials to test permitted PUT/GET and prohibited bucket-administration requests.

Question 400

A cloud backup application demands object versioning and Object Lock but its proposed target is an ONTAP S3 NAS bucket whose available APIs differ from native buckets. Which ONTAP administration step most directly corrects this failure?

  1. Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets.
  2. Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions.
  3. Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it.
  4. Update the application to use the newly issued ONTAP S3 access key and secret for the authorized object user.

Explanation

Correct Answer

C:

Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it. ONTAP native S3 buckets and NAS-backed S3 access can differ in supported versioning and object-lock operations. Acceptance requires: Call the required S3 API in a supported test environment and verify version/object-lock behavior before migration.

Other Answers

A:

Enable and configure an ONTAP S3 object-store server with the intended SVM and supported data LIF before provisioning buckets. This responds to another ontap s3 solutions issue: A development group sends S3 PUT requests directly to an SVM that has NAS volumes but has no configured S3 object-store server. Its mechanism is: An NFS or SMB server does not itself implement an S3 endpoint; the object server and network access must exist. The present case instead requires: Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it.

B:

Assign a suitable S3 user/group and bucket access policy granting precisely the needed object actions. This responds to another ontap s3 solutions issue: An ONTAP S3 bucket exists, but a service account receives AccessDenied because administrators assume SMB ACLs grant bucket writes. Its mechanism is: S3 bucket authorization follows object-store policies and credentials, not SMB share ACLs on an unrelated namespace. The present case instead requires: Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it.

D:

Update the application to use the newly issued ONTAP S3 access key and secret for the authorized object user. This responds to another ontap s3 solutions issue: An object-archive service began receiving S3 signature failures immediately after its access key was rotated, even though the bucket and network endpoint still exist. Its mechanism is: S3 request signatures depend on the configured credentials, so a retired key fails authentication independently of bucket capacity. The present case instead requires: Verify version-specific S3 API support and select a supported native bucket mode when the required object features demand it.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests