McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 24

Question 230

In a separate fictional JNCIS-SP lab review for Harborview ISP 058, a carrier-edge and core routing team, following a monitored network change window, engineers find: A newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree. Which networking principle explains why the proposed correction is appropriate?

  1. OSPF route visibility depends on appropriate LSA origination and flooding through the area topology.
  2. OSPF topological information must be refreshed and synchronized to remain valid.
  3. Filter-based forwarding selects a routing lookup context based on packet classification.
  4. OSPF peers must satisfy the configured authentication requirements to participate.

Explanation

Correct Answer

D:

OSPF peers must satisfy the configured authentication requirements to participate. Authenticated neighbors become Full and reject intentionally incorrect credentials. Apply compatible supported authentication settings on the intended OSPF interfaces and verify adjacency recovery.

Incorrect Answers

A:

OSPF route visibility depends on appropriate LSA origination and flooding through the area topology. That relates to circumstances in which operators expect a customer prefix from another area but only inspect local interface counters and never examine link-state advertisements. Here the problem is that a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

B:

OSPF topological information must be refreshed and synchronized to remain valid. This addresses a situation in which an OSPF route vanishes intermittently because a neighbor cannot refresh topology information after repeated link resets; however, a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

C:

Filter-based forwarding selects a routing lookup context based on packet classification. The choice would be appropriate if a traffic class should be steered into an alternate routing instance but the firewall filter maps it to the default route lookup. Here, a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

Question 231

In a separate fictional JNCIS-SP lab review for Harborview ISP 058, a carrier-edge and core routing team, following a monitored network change window, engineers find: A newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree. Which validation result would confirm the design is now functioning?

  1. Neighbor state stabilizes and hello and dead intervals match on both endpoints.
  2. The approved prefix is present as an external OSPF route and unauthorized prefixes remain absent.
  3. The active label operation now uses the recovered egress next hop.
  4. Authenticated neighbors become Full and reject intentionally incorrect credentials.

Explanation

Correct Answer

D:

Authenticated neighbors become Full and reject intentionally incorrect credentials. Apply compatible supported authentication settings on the intended OSPF interfaces and verify adjacency recovery. OSPF peers must satisfy the configured authentication requirements to participate.

Incorrect Answers

A:

Neighbor state stabilizes and hello and dead intervals match on both endpoints. It is useful for situations where OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template; the reported fault, though, is that a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

B:

The approved prefix is present as an external OSPF route and unauthorized prefixes remain absent. That relates to circumstances in which a static service prefix is missing from OSPF because the export policy was attached but does not match it. Here the problem is that a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

C:

The active label operation now uses the recovered egress next hop. This addresses a situation in which after an IGP reconvergence, an old MPLS label still points to a failed interface on one transit device; however, a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

Question 232

In a separate fictional JNCIS-SP lab review for Harborview ISP 058, a carrier-edge and core routing team, following a monitored network change window, engineers find: A newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree. What likely service impact does this condition create?

  1. A transit route remains unavailable because neighbor behavior is inconsistent.
  2. Routing connectivity fails or a poorly scoped workaround weakens control-plane trust.
  3. The IGP cannot distribute transit reachability over the circuit.
  4. A partial label-distribution failure persists without an alert.

Explanation

Correct Answer

B:

Routing connectivity fails or a poorly scoped workaround weakens control-plane trust. Apply compatible supported authentication settings on the intended OSPF interfaces and verify adjacency recovery. OSPF peers must satisfy the configured authentication requirements to participate.

Incorrect Answers

A:

A transit route remains unavailable because neighbor behavior is inconsistent. This relates to a case where OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology; the current situation is that a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

C:

The IGP cannot distribute transit reachability over the circuit. That relates to circumstances in which two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. Here the problem is that a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

D:

A partial label-distribution failure persists without an alert. This addresses a situation in which monitoring checks only LDP adjacency state and never detects missing forwarding labels for a critical PE loopback; however, a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree.

Question 233

At fictional Greenbridge ISP 059, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. Which configuration or operational correction most directly addresses this failure?

  1. Assign unique stable router IDs and safely reestablish affected OSPF adjacencies.
  2. Stabilize the underlying neighbor relationship and verify refreshed LSA lifetimes.
  3. Investigate Layer 2 topology, bridge membership and possible loop before route-policy changes.
  4. Verify active next-hop resolution and transit forwarding after OSPF convergence.

Explanation

Correct Answer

D:

Verify active next-hop resolution and transit forwarding after OSPF convergence. A calculated OSPF path is not a substitute for functional packet forwarding validation. Route lookup and sample packets both follow the intended egress circuit after convergence.

Incorrect Answers

A:

Assign unique stable router IDs and safely reestablish affected OSPF adjacencies. This could help if two routers in the same routing domain advertise the same OSPF router ID after cloning a lab template, but not when an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

Stabilize the underlying neighbor relationship and verify refreshed LSA lifetimes. This relates to a case where an OSPF route vanishes intermittently because a neighbor cannot refresh topology information after repeated link resets; the current situation is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

C:

Investigate Layer 2 topology, bridge membership and possible loop before route-policy changes. It is useful for situations where a MAC moves rapidly among provider ports after a cabling change, yet troubleshooting focuses only on IP routing tables; the reported fault, though, is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 234

At fictional Greenbridge ISP 059, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. Which Junos forwarding or control-plane rule applies to this case?

  1. The OSPF router ID uniquely identifies a router in link-state advertisements.
  2. OSPF peers must satisfy the configured authentication requirements to participate.
  3. A calculated OSPF path is not a substitute for functional packet forwarding validation.
  4. BGP peers use negotiated timers to detect failed sessions and maintain liveness.

Explanation

Correct Answer

C:

A calculated OSPF path is not a substitute for functional packet forwarding validation. Verify active next-hop resolution and transit forwarding after OSPF convergence. Route lookup and sample packets both follow the intended egress circuit after convergence.

Incorrect Answers

A:

The OSPF router ID uniquely identifies a router in link-state advertisements. It is relevant if two routers in the same routing domain advertise the same OSPF router ID after cloning a lab template, but the reported issue is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

OSPF peers must satisfy the configured authentication requirements to participate. This could help if a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree, but not when an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

D:

BGP peers use negotiated timers to detect failed sessions and maintain liveness. It is useful for situations where a neighboring BGP session resets frequently because the timer design is incompatible with observed transport conditions; the reported fault, though, is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 235

At fictional Greenbridge ISP 059, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. What operational evidence best establishes successful remediation?

  1. Neighbors reach Full and relevant LSA identifiers and sequence states agree.
  2. Neighbor state stabilizes and hello and dead intervals match on both endpoints.
  3. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked.
  4. Route lookup and sample packets both follow the intended egress circuit after convergence.

Explanation

Correct Answer

D:

Route lookup and sample packets both follow the intended egress circuit after convergence. A calculated OSPF path is not a substitute for functional packet forwarding validation. Verify active next-hop resolution and transit forwarding after OSPF convergence.

Incorrect Answers

A:

Neighbors reach Full and relevant LSA identifiers and sequence states agree. This is applicable when two supposed adjacent routers have different views of a backbone link because database synchronization never completes; the present condition is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

Neighbor state stabilizes and hello and dead intervals match on both endpoints. It is relevant if OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template, but the reported issue is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

C:

The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked. This could help if a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish, but not when an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 236

At fictional Greenbridge ISP 059, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. Which operational harm would persist without the intended correction?

  1. A transit route remains unavailable because neighbor behavior is inconsistent.
  2. Misdiagnosis delays restoration because absent control-plane information is overlooked.
  3. Routine traffic takes an unintended lower-capacity path and outage behavior becomes unpredictable.
  4. Customers still experience blackholes despite apparently healthy protocol neighbors.

Explanation

Correct Answer

D:

Customers still experience blackholes despite apparently healthy protocol neighbors. A calculated OSPF path is not a substitute for functional packet forwarding validation. Verify active next-hop resolution and transit forwarding after OSPF convergence.

Incorrect Answers

A:

A transit route remains unavailable because neighbor behavior is inconsistent. That could help when OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology; here, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

Misdiagnosis delays restoration because absent control-plane information is overlooked. This is applicable when operators expect a customer prefix from another area but only inspect local interface counters and never examine link-state advertisements; the present condition is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

C:

Routine traffic takes an unintended lower-capacity path and outage behavior becomes unpredictable. It is relevant if a fallback static route takes traffic away from a healthy primary connection because its route preference was set too low, but the reported issue is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 237

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 060, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. What should the Junos specialist change first to resolve this specific fault?

  1. Check ABR area participation and intended interarea advertisement and restore correct connectivity.
  2. Fix the OSPF export policy's precise match and validate external route origination.
  3. Verify active next-hop resolution and transit forwarding after OSPF convergence.
  4. Adjust the intended export policy match and confirm service-prefix advertisement.

Explanation

Correct Answer

C:

Verify active next-hop resolution and transit forwarding after OSPF convergence. Route lookup and sample packets both follow the intended egress circuit after convergence. A calculated OSPF path is not a substitute for functional packet forwarding validation.

Incorrect Answers

A:

Check ABR area participation and intended interarea advertisement and restore correct connectivity. This could matter when a site advertises internal prefixes inside one area, but a remote OSPF area cannot learn them because the area border configuration is incomplete. In this case, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

Fix the OSPF export policy's precise match and validate external route origination. That could help when a static service prefix is missing from OSPF because the export policy was attached but does not match it; here, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

D:

Adjust the intended export policy match and confirm service-prefix advertisement. It is relevant if a customer service route never reaches another IS-IS area because the required export policy omits it, but the reported issue is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 238

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 060, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. What technical principle underlies the right remedy?

  1. A calculated OSPF path is not a substitute for functional packet forwarding validation.
  2. OSPF topological information must be refreshed and synchronized to remain valid.
  3. OSPF neighbors need compatible area context to exchange database information.
  4. An established BGP session does not by itself establish which received path will be preferred.

Explanation

Correct Answer

A:

A calculated OSPF path is not a substitute for functional packet forwarding validation. Route lookup and sample packets both follow the intended egress circuit after convergence. Verify active next-hop resolution and transit forwarding after OSPF convergence.

Incorrect Answers

B:

OSPF topological information must be refreshed and synchronized to remain valid. This could matter when an OSPF route vanishes intermittently because a neighbor cannot refresh topology information after repeated link resets. In this case, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

C:

OSPF neighbors need compatible area context to exchange database information. That could help when two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs; here, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

D:

An established BGP session does not by itself establish which received path will be preferred. This is applicable when a prefix switches BGP best paths and operators cannot explain the result because only peer state is monitored; the present condition is that an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 239

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 060, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. Which acceptance finding demonstrates the affected service has recovered?

  1. The circuit forms the expected point-to-point adjacency without an unwanted DR election.
  2. Remote routers receive the intended interarea route and retain correct area separation.
  3. The backup becomes master during a controlled failure and hosts retain gateway reachability.
  4. Route lookup and sample packets both follow the intended egress circuit after convergence.

Explanation

Correct Answer

D:

Route lookup and sample packets both follow the intended egress circuit after convergence. Verify active next-hop resolution and transit forwarding after OSPF convergence. A calculated OSPF path is not a substitute for functional packet forwarding validation.

Incorrect Answers

A:

The circuit forms the expected point-to-point adjacency without an unwanted DR election. That option concerns OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology. The problem here is different: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

Remote routers receive the intended interarea route and retain correct area separation. It addresses a different problem: A site advertises internal prefixes inside one area, but a remote OSPF area cannot learn them because the area border configuration is incomplete. Here, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

C:

The backup becomes master during a controlled failure and hosts retain gateway reachability. This could matter when an access VLAN loses default-gateway access after the primary router fails because the backup's VRRP state is incorrect. In this case, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Question 240

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 060, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. What is the direct residual network risk if the fault remains unresolved?

  1. Remote sites lose the service route or excessive routes leak into the IGP.
  2. A transit route remains unavailable because neighbor behavior is inconsistent.
  3. Customers still experience blackholes despite apparently healthy protocol neighbors.
  4. Intermittent route loss causes repeated customer outages.

Explanation

Correct Answer

C:

Customers still experience blackholes despite apparently healthy protocol neighbors. Verify active next-hop resolution and transit forwarding after OSPF convergence. A calculated OSPF path is not a substitute for functional packet forwarding validation.

Incorrect Answers

A:

Remote sites lose the service route or excessive routes leak into the IGP. The choice would be appropriate if a static service prefix is missing from OSPF because the export policy was attached but does not match it. Here, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

B:

A transit route remains unavailable because neighbor behavior is inconsistent. That option concerns OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology. The problem here is different: An engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

D:

Intermittent route loss causes repeated customer outages. This could matter when an upstream prefix repeatedly withdraws and returns but the operations view shows only the current best route. In this case, an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests