Question 890 An LCD appears fuzzy and text has colored fringes because the output resolution does not match the panel's native pixel grid. Which solution addresses the cause without unnecessary unrelated changes? Select the correct digital audio output and verify projector speaker support Use supported pixel-care practices and service or replace the panel if retention is permanent Set a supported native display resolution and verify OS scaling separately Use compatible aspect-ratio and scaling settings on the projector and source Explanation Correct Answer C:The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution. Incorrect Answers A:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output. B:The ghost pattern remains visible after changing input content and matches long-running static UI elements, consistent with an oled persistent image burn-in. D:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch.
Question 891 An OLED information panel shows faint permanent navigation icons after a static dashboard was displayed continuously for months. Which corrective action is the safest and most direct response? Set a supported native display resolution and verify OS scaling separately Apply manufacturer warranty criteria and replace the panel if necessary Use a certified higher-bandwidth video cable or select a mode supported by the link Use supported pixel-care practices and service or replace the panel if retention is permanent Explanation Correct Answer D:The ghost pattern remains visible after changing input content and matches long-running static UI elements, consistent with an oled persistent image burn-in. Incorrect Answers A:The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution. B:A solid-color test pattern consistently shows one pixel failing to illuminate, consistent with a dead pixel in the display matrix. C:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode.
Question 892 A technician has authorization to fix the issue: A monitor flickers only when a high refresh option is selected with a long, marginal video cable. What action should be taken next? Reseat or replace the video lead and verify connector retention Repair or replace the analog cable and inspect connector pins Select the correct digital audio output and verify projector speaker support Use a certified higher-bandwidth video cable or select a mode supported by the link Explanation Correct Answer D:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode. Incorrect Answers A:Moving the cable triggers signal loss and a known-good cable restores a stable display, consistent with a loose or damaged video cable. B:A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable. C:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output.
Question 893 A conference-room PC sends presentation video to the projector, but sound continues from the PC speakers rather than the projector. Which repair or configuration change addresses the underlying problem? Use a certified higher-bandwidth video cable or select a mode supported by the link Choose the connected input and verify the laptop is outputting a supported display mode Use compatible aspect-ratio and scaling settings on the projector and source Select the correct digital audio output and verify projector speaker support Explanation Correct Answer D:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output. Incorrect Answers A:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode. B:The live cable terminates at HDMI 1 while the projector is listening to HDMI 2, consistent with a projector input source selected incorrectly. C:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch.
Question 894 A maintenance window is available for the following problem: A projector crops the right side of a wide presentation because its configured aspect ratio does not match the laptop output. Which intervention is most appropriate? Apply manufacturer warranty criteria and replace the panel if necessary Use compatible aspect-ratio and scaling settings on the projector and source Set a supported native display resolution and verify OS scaling separately Select the correct digital audio output and verify projector speaker support Explanation Correct Answer B:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch. Incorrect Answers A:A solid-color test pattern consistently shows one pixel failing to illuminate, consistent with a dead pixel in the display matrix. C:The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution. D:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output.
Question 895 The owner wants a specific repair, not merely more monitoring: A monitor shows one permanently black pixel at the same location across all applications and input sources. What should the technician do? Use compatible aspect-ratio and scaling settings on the projector and source Repair or replace the analog cable and inspect connector pins Use a certified higher-bandwidth video cable or select a mode supported by the link Apply manufacturer warranty criteria and replace the panel if necessary Explanation Correct Answer D:A solid-color test pattern consistently shows one pixel failing to illuminate, consistent with a dead pixel in the display matrix. Incorrect Answers A:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch. B:A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable. C:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode.
Question 896 A phone's back glass has separated and a swollen internal battery can be seen beneath the enclosure. Which solution addresses the cause without unnecessary unrelated changes? Replace approved enclosure adhesive after confirming battery health Service the charge-port connector using approved parts Power off safely, stop charging and seek approved battery replacement or disposal Inspect and replace mechanically damaged chassis components safely Explanation Correct Answer C:The device's housing has bowed outward independently of software or charger settings, consistent with a mobile battery swelling and safety hazard. Incorrect Answers A:The adhesive holding the back glass has detached but the battery is visually flat and undamaged, consistent with a broken enclosure adhesive without battery deformation. B:The back housing is intact while the charge port shifts under cable insertion, consistent with a charging connector mechanically loosened. D:The casing is distorted at the impact corner and the battery has no visible or measured swelling, consistent with a bent phone chassis after impact.
Question 897 A tablet was splashed with a drink; it still powers up but begins showing corrosion around the charge connector. Which corrective action is the safest and most direct response? Disconnect power, stop use and follow manufacturer liquid-damage inspection and service Use a compatible approved charger and cable supporting the necessary power profile Run supported touch calibration or replace the digitizer assembly if its sensor is faulty Clean only by an approved safe method or service the damaged port Explanation Correct Answer A:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage. Incorrect Answers B:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. C:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue. D:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port.
Question 898 A technician has authorization to fix the issue: A phone only charges when its USB-C connector is held at an angle, and several known-good chargers behave the same way. What action should be taken next? Clean only by an approved safe method or service the damaged port Verify antenna integrity and access-point coverage, then repair or change placement as appropriate Use a compatible approved charger and cable supporting the necessary power profile Disconnect power, stop use and follow manufacturer liquid-damage inspection and service Explanation Correct Answer A:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port. Incorrect Answers B:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue. C:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. D:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage.
Question 899 A tablet charges slowly through a low-power adapter even though its specified fast-charge power profile is supported by a newer charger. Which repair or configuration change addresses the underlying problem? Use a compatible approved charger and cable supporting the necessary power profile Disconnect power, stop use and follow manufacturer liquid-damage inspection and service Charge or replace the supported pen and inspect its tip before servicing the screen Clean only by an approved safe method or service the damaged port Explanation Correct Answer A:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. Incorrect Answers B:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage. C:The stylus charge is depleted or its nib is worn while capacitive finger input works normally, consistent with an active stylus tip or battery fault. D:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port.
Question 900 A maintenance window is available for the following problem: A phone connects to the same home Wi-Fi as other devices but loses Internet intermittently whenever it moves away from the access point. Which intervention is most appropriate? Verify antenna integrity and access-point coverage, then repair or change placement as appropriate Follow MDM incident procedure to isolate or remove the untrusted app and verify device integrity Run supported touch calibration or replace the digitizer assembly if its sensor is faulty Clean only by an approved safe method or service the damaged port Explanation Correct Answer A:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue. Incorrect Answers B:The questionable app has unusual permissions and its network activity aligns with the symptoms, consistent with a potentially malicious mobile application. C:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue. D:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port.