Question 870 A maintenance window is available for the following problem: A server's fan makes a grinding sound and CPU temperatures climb even when the case filters are clean. Which intervention is most appropriate? Restore a supported CPU or perform the vendor-approved firmware update procedure safely Replace the faulty fan with a compatible unit and verify airflow and thermal margins Restore a safe automatic fan curve and verify sustained processor performance Clean cooling pathways safely, restore proper ventilation and validate temperatures Explanation Correct Answer B:The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum, consistent with a failing fan bearing in cooling assembly. Incorrect Answers A:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. C:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. D:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow.
Question 871 The owner wants a specific repair, not merely more monitoring: A PC powers up but gives a repeating POST beep sequence and no video after a technician installed a new CPU. What should the technician do? Restore a safe automatic fan curve and verify sustained processor performance Connect the display to the active GPU output or configure supported firmware display selection Power down safely, reseat the RAM, and run a memory diagnostic after boot Restore a supported CPU or perform the vendor-approved firmware update procedure safely Explanation Correct Answer D:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. Incorrect Answers A:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. B:The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output, consistent with a display output routed to wrong graphics port. C:The motherboard's documented beep code identifies RAM and inspection finds a DIMM latch not fully closed, consistent with a memory module unseated after transport.
Question 872 An office machine is unusually slow and the CPU clock stays far below base frequency even at moderate load; the heatsink is secure but its fan profile is set nearly off. Which solution addresses the cause without unnecessary unrelated changes? Replace the faulty fan with a compatible unit and verify airflow and thermal margins Restore a safe automatic fan curve and verify sustained processor performance Restore a supported CPU or perform the vendor-approved firmware update procedure safely Restore safe CPU cooling and verify thermal readings during a controlled load test Explanation Correct Answer B:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. Incorrect Answers A:The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum, consistent with a failing fan bearing in cooling assembly. C:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. D:The heatsink fan is stopped and temperature climbs rapidly before the slowdown, consistent with a cpu thermal throttling from failed cooling.
Question 873 A kiosk shows a black screen only after moving to a new monitor, but boot beeps and network remote access show the OS is running. Which corrective action is the safest and most direct response? Restore a supported CPU or perform the vendor-approved firmware update procedure safely Connect the display to the active GPU output or configure supported firmware display selection Install a quality PSU with adequate transient capability and correct graphics power cables Install a correctly rated quality PSU with appropriate power connectors and headroom Explanation Correct Answer B:The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output, consistent with a display output routed to wrong graphics port. Incorrect Answers A:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. C:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. D:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load.
Question 874 A technician has authorization to fix the issue: A desktop's hard drive makes repeated clicks at startup and file reads intermittently hang. What action should be taken next? Schedule or throttle backup I/O and right-size storage performance for concurrent demand Back up important data immediately and replace the drive after verifying recovery Stop unnecessary writes, preserve recoverable data and replace the failing drive Replace the failed compatible disk and rebuild the mirror under monitored conditions Explanation Correct Answer C:SMART and vendor diagnostics show increasing media or seek errors alongside audible clicking, consistent with a mechanical hdd read-head or actuator failure. Incorrect Answers A:Queue depth and response time rise with backup traffic while disk health reports no failure, consistent with a storage iops contention under concurrent load. B:Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure. D:Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member.
Question 875 A storage drive's SMART predictive failure warning appears even though its files are still accessible. Which repair or configuration change addresses the underlying problem? Stop unnecessary writes, preserve recoverable data and replace the failing drive Use the vendor-approved foreign configuration import and confirm drive order before any initialization Replace the failed compatible disk and rebuild the mirror under monitored conditions Back up important data immediately and replace the drive after verifying recovery Explanation Correct Answer D:Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure. Incorrect Answers A:SMART and vendor diagnostics show increasing media or seek errors alongside audible clicking, consistent with a mechanical hdd read-head or actuator failure. B:The replacement controller has not imported the existing array metadata and lists members as foreign, consistent with a controller raid metadata or configuration mismatch. C:Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member.
Question 876 A maintenance window is available for the following problem: A freshly imaged PC displays 'no bootable device' after its boot-order settings were reset, though the SSD is detected in UEFI. Which intervention is most appropriate? Provide the correct signed storage driver or follow the vendor-approved controller mode configuration Free suitable space, verify TRIM and workload patterns, and avoid filling the drive completely Select the correct signed OS boot manager and verify boot configuration Back up important data immediately and replace the drive after verifying recovery Explanation Correct Answer C:Firmware lists the SSD but selects a nonexistent network or USB boot target first, consistent with a boot order points away from installed os. Incorrect Answers A:The installer sees no disk until the supported RAID/VMD controller driver is supplied, consistent with a missing storage controller driver or incompatible mode. B:Sustained write benchmarks improve when adequate spare capacity and TRIM operation are restored, consistent with a ssd performance degradation under exhausted free space. D:Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure.
Question 877 The owner wants a specific repair, not merely more monitoring: A RAID 1 storage pair reports a degraded status after one drive was physically removed, but the shared folder remains online. What should the technician do? Use the vendor-approved foreign configuration import and confirm drive order before any initialization Replace the failed compatible disk and rebuild the mirror under monitored conditions Back up important data immediately and replace the drive after verifying recovery Schedule or throttle backup I/O and right-size storage performance for concurrent demand Explanation Correct Answer B:Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member. Incorrect Answers A:The replacement controller has not imported the existing array metadata and lists members as foreign, consistent with a controller raid metadata or configuration mismatch. C:Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure. D:Queue depth and response time rise with backup traffic while disk health reports no failure, consistent with a storage iops contention under concurrent load.
Question 878 After a storage controller replacement, a multi-disk RAID set appears as several unconfigured disks although the drives themselves pass health checks. Which solution addresses the cause without unnecessary unrelated changes? Provide the correct signed storage driver or follow the vendor-approved controller mode configuration Replace the failed compatible disk and rebuild the mirror under monitored conditions Use the vendor-approved foreign configuration import and confirm drive order before any initialization Back up important data immediately and replace the drive after verifying recovery Explanation Correct Answer C:The replacement controller has not imported the existing array metadata and lists members as foreign, consistent with a controller raid metadata or configuration mismatch. Incorrect Answers A:The installer sees no disk until the supported RAID/VMD controller driver is supplied, consistent with a missing storage controller driver or incompatible mode. B:Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member. D:Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure.
Question 879 A virtual host's storage remains online but latency spikes during backup windows and monitoring shows near-saturated read/write queues. Which corrective action is the safest and most direct response? Use the vendor-approved foreign configuration import and confirm drive order before any initialization Replace the failed compatible disk and rebuild the mirror under monitored conditions Provide the correct signed storage driver or follow the vendor-approved controller mode configuration Schedule or throttle backup I/O and right-size storage performance for concurrent demand Explanation Correct Answer D:Queue depth and response time rise with backup traffic while disk health reports no failure, consistent with a storage iops contention under concurrent load. Incorrect Answers A:The replacement controller has not imported the existing array metadata and lists members as foreign, consistent with a controller raid metadata or configuration mismatch. B:Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member. C:The installer sees no disk until the supported RAID/VMD controller driver is supplied, consistent with a missing storage controller driver or incompatible mode.
Question 880 A technician has authorization to fix the issue: A user copies a project to a removable USB drive, and files become corrupt only when the cable is touched. What action should be taken next? Back up important data immediately and replace the drive after verifying recovery Replace the damaged data cable or connector and verify files from a healthy backup Replace the failed compatible disk and rebuild the mirror under monitored conditions Reseat or replace the SATA data cable and test a supported motherboard port Explanation Correct Answer B:I/O errors correlate with movement and disappear with a known-good cable and port, consistent with an intermittent external drive cable or connector. Incorrect Answers A:Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure. C:Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member. D:The drive's power lead is connected but the SATA data cable is loose or fails a known-good swap, consistent with a disconnected or defective sata data path.