McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 89

Question 880

A technician has authorization to fix the issue: A user copies a project to a removable USB drive, and files become corrupt only when the cable is touched. What action should be taken next?

  1. Back up important data immediately and replace the drive after verifying recovery
  2. Replace the damaged data cable or connector and verify files from a healthy backup
  3. Replace the failed compatible disk and rebuild the mirror under monitored conditions
  4. Reseat or replace the SATA data cable and test a supported motherboard port

Explanation

Correct Answer

B:

I/O errors correlate with movement and disappear with a known-good cable and port, consistent with an intermittent external drive cable or connector.

Incorrect Answers

A:

Health attributes exceed vendor-defined thresholds and the firmware marks the disk at risk, consistent with a smart-reported impending disk failure.

C:

Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member.

D:

The drive's power lead is connected but the SATA data cable is loose or fails a known-good swap, consistent with a disconnected or defective sata data path.

Question 881

A new internal SATA drive spins up and receives power but never appears in UEFI after a system upgrade. Which repair or configuration change addresses the underlying problem?

  1. Replace the damaged data cable or connector and verify files from a healthy backup
  2. Reseat or replace the SATA data cable and test a supported motherboard port
  3. Replace the failed compatible disk and rebuild the mirror under monitored conditions
  4. Provide the correct signed storage driver or follow the vendor-approved controller mode configuration

Explanation

Correct Answer

B:

The drive's power lead is connected but the SATA data cable is loose or fails a known-good swap, consistent with a disconnected or defective sata data path.

Incorrect Answers

A:

I/O errors correlate with movement and disappear with a known-good cable and port, consistent with an intermittent external drive cable or connector.

C:

Array management identifies exactly one failed member and the other mirror disk is healthy, consistent with a raid mirror degraded with one surviving member.

D:

The installer sees no disk until the supported RAID/VMD controller driver is supplied, consistent with a missing storage controller driver or incompatible mode.

Question 882

A maintenance window is available for the following problem: A laptop's SSD appears in firmware but a newly installed OS cannot access it because the storage controller mode differs from the installation driver. Which intervention is most appropriate?

  1. Use the vendor-approved foreign configuration import and confirm drive order before any initialization
  2. Reseat or replace the SATA data cable and test a supported motherboard port
  3. Provide the correct signed storage driver or follow the vendor-approved controller mode configuration
  4. Schedule or throttle backup I/O and right-size storage performance for concurrent demand

Explanation

Correct Answer

C:

The installer sees no disk until the supported RAID/VMD controller driver is supplied, consistent with a missing storage controller driver or incompatible mode.

Incorrect Answers

A:

The replacement controller has not imported the existing array metadata and lists members as foreign, consistent with a controller raid metadata or configuration mismatch.

B:

The drive's power lead is connected but the SATA data cable is loose or fails a known-good swap, consistent with a disconnected or defective sata data path.

D:

Queue depth and response time rise with backup traffic while disk health reports no failure, consistent with a storage iops contention under concurrent load.

Question 883

The owner wants a specific repair, not merely more monitoring: A workstation recently froze during a power outage and now reports file-system errors although the disk SMART health remains normal. What should the technician do?

  1. Use the vendor-approved foreign configuration import and confirm drive order before any initialization
  2. Free suitable space, verify TRIM and workload patterns, and avoid filling the drive completely
  3. Schedule or throttle backup I/O and right-size storage performance for concurrent demand
  4. Preserve a backup and run supported repair and verification utilities within a recovery plan

Explanation

Correct Answer

D:

Read-only file-system checks identify metadata inconsistency without the hardware reporting media failure, consistent with a logical file-system corruption after abrupt power loss.

Incorrect Answers

A:

The replacement controller has not imported the existing array metadata and lists members as foreign, consistent with a controller raid metadata or configuration mismatch.

B:

Sustained write benchmarks improve when adequate spare capacity and TRIM operation are restored, consistent with a ssd performance degradation under exhausted free space.

C:

Queue depth and response time rise with backup traffic while disk health reports no failure, consistent with a storage iops contention under concurrent load.

Question 884

A flash SSD has little free space and sustained writes have become unusually slow, though read speeds remain good and the device passes health tests. Which solution addresses the cause without unnecessary unrelated changes?

  1. Preserve a backup and run supported repair and verification utilities within a recovery plan
  2. Schedule or throttle backup I/O and right-size storage performance for concurrent demand
  3. Select the correct signed OS boot manager and verify boot configuration
  4. Free suitable space, verify TRIM and workload patterns, and avoid filling the drive completely

Explanation

Correct Answer

D:

Sustained write benchmarks improve when adequate spare capacity and TRIM operation are restored, consistent with a ssd performance degradation under exhausted free space.

Incorrect Answers

A:

Read-only file-system checks identify metadata inconsistency without the hardware reporting media failure, consistent with a logical file-system corruption after abrupt power loss.

B:

Queue depth and response time rise with backup traffic while disk health reports no failure, consistent with a storage iops contention under concurrent load.

C:

Firmware lists the SSD but selects a nonexistent network or USB boot target first, consistent with a boot order points away from installed os.

Question 885

A meeting-room projector says 'No signal' even while a laptop screen is functioning and the projector's input menu points to HDMI 2 instead of HDMI 1. Which corrective action is the safest and most direct response?

  1. Choose the connected input and verify the laptop is outputting a supported display mode
  2. Select the correct digital audio output and verify projector speaker support
  3. Repair or replace the analog cable and inspect connector pins
  4. Clean the approved filters and restore ventilation before retesting

Explanation

Correct Answer

A:

The live cable terminates at HDMI 1 while the projector is listening to HDMI 2, consistent with a projector input source selected incorrectly.

Incorrect Answers

B:

The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output.

C:

A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable.

D:

Air filters are clogged and the exhaust is obstructed when the temperature alert occurs, consistent with a projector thermal shutdown from blocked cooling.

Question 886

A technician has authorization to fix the issue: An external monitor loses the image whenever the desk's video cable is bumped; a different cable works reliably. What action should be taken next?

  1. Use a certified higher-bandwidth video cable or select a mode supported by the link
  2. Repair or replace the analog cable and inspect connector pins
  3. Reseat or replace the video lead and verify connector retention
  4. Replace the lamp or light-engine consumable following cooling and service precautions

Explanation

Correct Answer

C:

Moving the cable triggers signal loss and a known-good cable restores a stable display, consistent with a loose or damaged video cable.

Incorrect Answers

A:

Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode.

B:

A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable.

D:

The lamp hours exceed the recommended service interval and another supported lamp restores brightness, consistent with a projector lamp nearing end of life.

Question 887

A projector image becomes very dim, the lamp-life counter is near its service limit, and brightness controls do not help. Which repair or configuration change addresses the underlying problem?

  1. Choose the connected input and verify the laptop is outputting a supported display mode
  2. Reseat or replace the video lead and verify connector retention
  3. Clean the approved filters and restore ventilation before retesting
  4. Replace the lamp or light-engine consumable following cooling and service precautions

Explanation

Correct Answer

D:

The lamp hours exceed the recommended service interval and another supported lamp restores brightness, consistent with a projector lamp nearing end of life.

Incorrect Answers

A:

The live cable terminates at HDMI 1 while the projector is listening to HDMI 2, consistent with a projector input source selected incorrectly.

B:

Moving the cable triggers signal loss and a known-good cable restores a stable display, consistent with a loose or damaged video cable.

C:

Air filters are clogged and the exhaust is obstructed when the temperature alert occurs, consistent with a projector thermal shutdown from blocked cooling.

Question 888

A maintenance window is available for the following problem: A projector shuts down after twenty minutes in a warm room and displays a temperature warning. Which intervention is most appropriate?

  1. Choose the connected input and verify the laptop is outputting a supported display mode
  2. Replace the lamp or light-engine consumable following cooling and service precautions
  3. Repair or replace the analog cable and inspect connector pins
  4. Clean the approved filters and restore ventilation before retesting

Explanation

Correct Answer

D:

Air filters are clogged and the exhaust is obstructed when the temperature alert occurs, consistent with a projector thermal shutdown from blocked cooling.

Incorrect Answers

A:

The live cable terminates at HDMI 1 while the projector is listening to HDMI 2, consistent with a projector input source selected incorrectly.

B:

The lamp hours exceed the recommended service interval and another supported lamp restores brightness, consistent with a projector lamp nearing end of life.

C:

A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable.

Question 889

The owner wants a specific repair, not merely more monitoring: A monitor displays a strong blue tint over a VGA connection while the same source looks normal on another cable. What should the technician do?

  1. Repair or replace the analog cable and inspect connector pins
  2. Use a certified higher-bandwidth video cable or select a mode supported by the link
  3. Reseat or replace the video lead and verify connector retention
  4. Clean the approved filters and restore ventilation before retesting

Explanation

Correct Answer

A:

A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable.

Incorrect Answers

B:

Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode.

C:

Moving the cable triggers signal loss and a known-good cable restores a stable display, consistent with a loose or damaged video cable.

D:

Air filters are clogged and the exhaust is obstructed when the temperature alert occurs, consistent with a projector thermal shutdown from blocked cooling.

Question 890

An LCD appears fuzzy and text has colored fringes because the output resolution does not match the panel's native pixel grid. Which solution addresses the cause without unnecessary unrelated changes?

  1. Select the correct digital audio output and verify projector speaker support
  2. Use supported pixel-care practices and service or replace the panel if retention is permanent
  3. Set a supported native display resolution and verify OS scaling separately
  4. Use compatible aspect-ratio and scaling settings on the projector and source

Explanation

Correct Answer

C:

The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution.

Incorrect Answers

A:

The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output.

B:

The ghost pattern remains visible after changing input content and matches long-running static UI elements, consistent with an oled persistent image burn-in.

D:

The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests