Question 860 A department's laser printer shows black specks scattered over clean white areas on multiple test pages after a toner spill. Which additional observation would most strongly corroborate the suspected cause? The device's toner status and controlled test pages show one color missing across all clients A local test page succeeds while authorized clients cannot reach the printer's configured IP or print service The printer can produce un-stapled output while the stapling unit shows an obstruction Speckling persists across different documents and visible loose toner is present in the device Explanation Correct Answer D:Speckling persists across different documents and visible loose toner is present in the device, consistent with a loose toner or contaminated laser print path. Incorrect Answers A:The device's toner status and controlled test pages show one color missing across all clients, consistent with a depleted color toner cartridge. B:A local test page succeeds while authorized clients cannot reach the printer's configured IP or print service, consistent with a printer network reachability or allowed ports blocked. C:The printer can produce un-stapled output while the stapling unit shows an obstruction, consistent with a stapler finisher mechanism jam.
Question 861 The owner wants a specific repair, not merely more monitoring: A desktop turns off abruptly during 3D rendering but runs office applications, and a power monitor shows the graphics workload exceeding the current supply's reliable output. What should the technician do? Update or roll back the supported GPU driver and check stability Use supported memory timings and verify stability Repair CPU cooling and verify a stable thermal load test Install a correctly rated quality PSU with appropriate power connectors and headroom Explanation Correct Answer D:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. Incorrect Answers A:The graphics driver records a reset event and the system continues running instead of abruptly losing power, consistent with a gpu graphics driver timeout. B:Memory stress tests fail with aggressive timings while PSU readings stay inside the rated capacity, consistent with an unstable memory xmp profile. C:CPU temperature reaches the thermal protection threshold before shutdown even when PSU power is sufficient, consistent with a cpu thermal shutdown under sustained compute.
Question 862 A PC sounds a repeated memory-related POST beep pattern after being moved, and the display never shows firmware setup. Which solution addresses the cause without unnecessary unrelated changes? Connect the display to the active GPU output or configure supported firmware display selection Install a correctly rated quality PSU with appropriate power connectors and headroom Restore a supported CPU or perform the vendor-approved firmware update procedure safely Power down safely, reseat the RAM, and run a memory diagnostic after boot Explanation Correct Answer D:The motherboard's documented beep code identifies RAM and inspection finds a DIMM latch not fully closed, consistent with a memory module unseated after transport. Incorrect Answers A:The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output, consistent with a display output routed to wrong graphics port. B:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. C:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure.
Question 863 A workstation slows and then powers off during extended compiling, with CPU temperature reaching the hardware protection limit. Which corrective action is the safest and most direct response? Replace the compatible coin-cell battery and restore firmware settings Restore safe CPU cooling and verify thermal readings during a controlled load test Install a correctly rated quality PSU with appropriate power connectors and headroom Restore a safe automatic fan curve and verify sustained processor performance Explanation Correct Answer B:The heatsink fan is stopped and temperature climbs rapidly before the slowdown, consistent with a cpu thermal throttling from failed cooling. Incorrect Answers A:Firmware settings reset only when wall power is removed and the RTC cell voltage measures low, consistent with a depleted cmos/rtc battery. C:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. D:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling.
Question 864 A technician has authorization to fix the issue: A powered-off desktop repeatedly loses the date and firmware boot order between unplugged sessions, although it starts normally after configuration. What action should be taken next? Restore safe CPU cooling and verify thermal readings during a controlled load test Replace the compatible coin-cell battery and restore firmware settings Restore a safe automatic fan curve and verify sustained processor performance Clean cooling pathways safely, restore proper ventilation and validate temperatures Explanation Correct Answer B:Firmware settings reset only when wall power is removed and the RTC cell voltage measures low, consistent with a depleted cmos/rtc battery. Incorrect Answers A:The heatsink fan is stopped and temperature climbs rapidly before the slowdown, consistent with a cpu thermal throttling from failed cooling. C:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. D:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow.
Question 865 The owner wants a specific repair, not merely more monitoring: An aging tower sometimes refuses to start and the motherboard contains electrolytic capacitors with bulging tops and residue. What should the technician do? Return to supported JEDEC timings or verified stable matched modules and rerun diagnostics Replace the affected board through approved service procedures rather than powering damaged circuitry repeatedly Install a quality PSU with adequate transient capability and correct graphics power cables Use approved PSU diagnostics and replace the defective supply with an appropriately rated one Explanation Correct Answer B:A visual inspection with AC power disconnected finds swollen or leaking capacitors near the voltage regulators, consistent with a damaged motherboard capacitors. Incorrect Answers A:A memory diagnostic fails only with the aggressive shared timing profile enabled, consistent with an unstable combined ram profile. C:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. D:A known-good power cord and wall outlet deliver power but the PSU fails safe output tests, consistent with a failed or disconnected power supply.
Question 866 A desktop has no fan spin and no standby LED after a storm, although the wall socket tests good with another device. Which solution addresses the cause without unnecessary unrelated changes? Install a quality PSU with adequate transient capability and correct graphics power cables Clean cooling pathways safely, restore proper ventilation and validate temperatures Use approved PSU diagnostics and replace the defective supply with an appropriately rated one Install a correctly rated quality PSU with appropriate power connectors and headroom Explanation Correct Answer C:A known-good power cord and wall outlet deliver power but the PSU fails safe output tests, consistent with a failed or disconnected power supply. Incorrect Answers A:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. B:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow. D:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load.
Question 867 A PC restarts only when a new graphics card enters its highest performance state, and a wattmeter shows brief load spikes above the supply's rating. Which corrective action is the safest and most direct response? Connect the display to the active GPU output or configure supported firmware display selection Install a correctly rated quality PSU with appropriate power connectors and headroom Install a quality PSU with adequate transient capability and correct graphics power cables Use approved PSU diagnostics and replace the defective supply with an appropriately rated one Explanation Correct Answer C:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. Incorrect Answers A:The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output, consistent with a display output routed to wrong graphics port. B:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. D:A known-good power cord and wall outlet deliver power but the PSU fails safe output tests, consistent with a failed or disconnected power supply.
Question 868 A technician has authorization to fix the issue: A home computer displays random blue screens after a new memory kit was added; each stick works alone but both fail together at overclocked timing. What action should be taken next? Restore a safe automatic fan curve and verify sustained processor performance Install a quality PSU with adequate transient capability and correct graphics power cables Restore a supported CPU or perform the vendor-approved firmware update procedure safely Return to supported JEDEC timings or verified stable matched modules and rerun diagnostics Explanation Correct Answer D:A memory diagnostic fails only with the aggressive shared timing profile enabled, consistent with an unstable combined ram profile. Incorrect Answers A:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. B:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. C:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure.
Question 869 A small desktop repeatedly powers off on hot days; its intake vents and fan blades are covered with thick dust. Which repair or configuration change addresses the underlying problem? Replace the compatible coin-cell battery and restore firmware settings Replace the faulty fan with a compatible unit and verify airflow and thermal margins Clean cooling pathways safely, restore proper ventilation and validate temperatures Restore a safe automatic fan curve and verify sustained processor performance Explanation Correct Answer C:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow. Incorrect Answers A:Firmware settings reset only when wall power is removed and the RTC cell voltage measures low, consistent with a depleted cmos/rtc battery. B:The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum, consistent with a failing fan bearing in cooling assembly. D:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling.
Question 870 A maintenance window is available for the following problem: A server's fan makes a grinding sound and CPU temperatures climb even when the case filters are clean. Which intervention is most appropriate? Restore a supported CPU or perform the vendor-approved firmware update procedure safely Replace the faulty fan with a compatible unit and verify airflow and thermal margins Restore a safe automatic fan curve and verify sustained processor performance Clean cooling pathways safely, restore proper ventilation and validate temperatures Explanation Correct Answer B:The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum, consistent with a failing fan bearing in cooling assembly. Incorrect Answers A:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. C:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. D:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow.