McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 85

Question 840

Before repairing this fault, the service desk wants reproducible evidence: Two Ethernet ports repeatedly transition up and down when a damaged cable is flexed, causing short network outages. Which finding is most relevant?

  1. Switch interface logs show repeated link-state transitions correlated with cable movement
  2. Spectrum activity rises near the microwave and the problem disappears when it is off
  3. Cable certification shows the run exceeds the supported channel length and has failing attenuation results
  4. Interface counters show late collisions or FCS errors and duplex settings differ on link partners

Explanation

Correct Answer

A:

Switch interface logs show repeated link-state transitions correlated with cable movement, consistent with a link flapping caused by physical cabling fault.

Incorrect Answers

B:

Spectrum activity rises near the microwave and the problem disappears when it is off, consistent with an external 2.4 ghz radio-frequency interference.

C:

Cable certification shows the run exceeds the supported channel length and has failing attenuation results, consistent with a copper link impairment from excessive cable length.

D:

Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch.

Question 841

After receiving the ticket, a senior technician asks: A long copper Ethernet run connects at a slower rate and produces CRC errors near the maximum cable-length limit. Which observation provides the best confirmation?

  1. Interface counters show late collisions or FCS errors and duplex settings differ on link partners
  2. Switch interface logs show repeated link-state transitions correlated with cable movement
  3. Round-trip time rises at the remote gateway despite low local LAN latency
  4. Cable certification shows the run exceeds the supported channel length and has failing attenuation results

Explanation

Correct Answer

D:

Cable certification shows the run exceeds the supported channel length and has failing attenuation results, consistent with a copper link impairment from excessive cable length.

Incorrect Answers

A:

Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch.

B:

Switch interface logs show repeated link-state transitions correlated with cable movement, consistent with a link flapping caused by physical cabling fault.

C:

Round-trip time rises at the remote gateway despite low local LAN latency, consistent with an excessive route latency from indirect network path.

Question 842

An office reports slow one-way file transfers after replacing a managed switch; one port is forced full duplex while its peer is half duplex. Which additional observation would most strongly corroborate the suspected cause?

  1. The switch port's configured VLAN ID does not match the intended user network
  2. Interface counters show late collisions or FCS errors and duplex settings differ on link partners
  3. Cable certification shows the run exceeds the supported channel length and has failing attenuation results
  4. Packet drops and voice degradation coincide with saturated outbound bandwidth

Explanation

Correct Answer

B:

Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch.

Incorrect Answers

A:

The switch port's configured VLAN ID does not match the intended user network, consistent with an incorrect switch access vlan assignment.

C:

Cable certification shows the run exceeds the supported channel length and has failing attenuation results, consistent with a copper link impairment from excessive cable length.

D:

Packet drops and voice degradation coincide with saturated outbound bandwidth, consistent with a wan congestion without voip quality-of-service prioritization.

Question 843

To avoid replacing the wrong part, a technician reviews the issue: A VPN user's connection is reachable but suffers long page-load delays; traceroute and monitoring show an unusually long path through distant gateways. Which verification is the most discriminating?

  1. Cable certification shows the run exceeds the supported channel length and has failing attenuation results
  2. The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address
  3. Round-trip time rises at the remote gateway despite low local LAN latency
  4. 802.1X logs show the client rejects the RADIUS server certificate chain

Explanation

Correct Answer

C:

Round-trip time rises at the remote gateway despite low local LAN latency, consistent with an excessive route latency from indirect network path.

Incorrect Answers

A:

Cable certification shows the run exceeds the supported channel length and has failing attenuation results, consistent with a copper link impairment from excessive cable length.

B:

The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address, consistent with an incorrect default route to external subnets.

D:

802.1X logs show the client rejects the RADIUS server certificate chain, consistent with an enterprise wi-fi certificate validation failure.

Question 844

A technician has a tentative diagnosis for this incident: An employee can join the office Wi-Fi but every attempt to access the protected network fails with a certificate trust error. Which test result would support it most directly?

  1. Lease requests from the affected VLAN do not arrive at the central DHCP service
  2. The switch port's configured VLAN ID does not match the intended user network
  3. 802.1X logs show the client rejects the RADIUS server certificate chain
  4. Round-trip time rises at the remote gateway despite low local LAN latency

Explanation

Correct Answer

C:

802.1X logs show the client rejects the RADIUS server certificate chain, consistent with an enterprise wi-fi certificate validation failure.

Incorrect Answers

A:

Lease requests from the affected VLAN do not arrive at the central DHCP service, consistent with a dhcp relay or vlan reachability failure.

B:

The switch port's configured VLAN ID does not match the intended user network, consistent with an incorrect switch access vlan assignment.

D:

Round-trip time rises at the remote gateway despite low local LAN latency, consistent with an excessive route latency from indirect network path.

Question 845

A laptop can communicate with devices on its access VLAN but not with a server on another floor after its switch port was moved to a new VLAN. Which evidence distinguishes the likely cause from other issues in the same technical area?

  1. The switch port's configured VLAN ID does not match the intended user network
  2. The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address
  3. Interface counters show late collisions or FCS errors and duplex settings differ on link partners
  4. Lease requests from the affected VLAN do not arrive at the central DHCP service

Explanation

Correct Answer

A:

The switch port's configured VLAN ID does not match the intended user network, consistent with an incorrect switch access vlan assignment.

Incorrect Answers

B:

The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address, consistent with an incorrect default route to external subnets.

C:

Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch.

D:

Lease requests from the affected VLAN do not arrive at the central DHCP service, consistent with a dhcp relay or vlan reachability failure.

Question 846

Before repairing this fault, the service desk wants reproducible evidence: A workstation has a correct static IP and subnet mask but no route to external networks because the configured default router IP is wrong. Which finding is most relevant?

  1. Round-trip time rises at the remote gateway despite low local LAN latency
  2. The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address
  3. The switch port's configured VLAN ID does not match the intended user network
  4. The hosts have no learned global router even though their network interfaces show link-local IPv6

Explanation

Correct Answer

B:

The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address, consistent with an incorrect default route to external subnets.

Incorrect Answers

A:

Round-trip time rises at the remote gateway despite low local LAN latency, consistent with an excessive route latency from indirect network path.

C:

The switch port's configured VLAN ID does not match the intended user network, consistent with an incorrect switch access vlan assignment.

D:

The hosts have no learned global router even though their network interfaces show link-local IPv6, consistent with an ipv6 router advertisement or default-route loss.

Question 847

After receiving the ticket, a senior technician asks: Several IPv6 clients can reach neighbors with link-local addresses but have no valid route to a public IPv6 website. Which observation provides the best confirmation?

  1. The hosts have no learned global router even though their network interfaces show link-local IPv6
  2. The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address
  3. The ISP radio signal and error rate worsen as the outdoor mount moves in wind
  4. Round-trip time rises at the remote gateway despite low local LAN latency

Explanation

Correct Answer

A:

The hosts have no learned global router even though their network interfaces show link-local IPv6, consistent with an ipv6 router advertisement or default-route loss.

Incorrect Answers

B:

The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address, consistent with an incorrect default route to external subnets.

C:

The ISP radio signal and error rate worsen as the outdoor mount moves in wind, consistent with an unstable fixed wireless line-of-sight alignment.

D:

Round-trip time rises at the remote gateway despite low local LAN latency, consistent with an excessive route latency from indirect network path.

Question 848

A small firm's network works each morning but loses WAN access each evening when its fixed wireless antenna shifts in high wind. Which additional observation would most strongly corroborate the suspected cause?

  1. The ISP radio signal and error rate worsen as the outdoor mount moves in wind
  2. The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address
  3. Packet drops and voice degradation coincide with saturated outbound bandwidth
  4. The hosts have no learned global router even though their network interfaces show link-local IPv6

Explanation

Correct Answer

A:

The ISP radio signal and error rate worsen as the outdoor mount moves in wind, consistent with an unstable fixed wireless line-of-sight alignment.

Incorrect Answers

B:

The first-hop gateway cannot be ARPed on the local network but other hosts use a different router address, consistent with an incorrect default route to external subnets.

C:

Packet drops and voice degradation coincide with saturated outbound bandwidth, consistent with a wan congestion without voip quality-of-service prioritization.

D:

The hosts have no learned global router even though their network interfaces show link-local IPv6, consistent with an ipv6 router advertisement or default-route loss.

Question 849

To avoid replacing the wrong part, a technician reviews the issue: A VoIP deployment loses voice packets while file transfers saturate the uplink during office backups. Which verification is the most discriminating?

  1. RTP monitoring shows large variations in packet interarrival time rather than sustained congestion
  2. The ISP radio signal and error rate worsen as the outdoor mount moves in wind
  3. Packet drops and voice degradation coincide with saturated outbound bandwidth
  4. Interface counters show late collisions or FCS errors and duplex settings differ on link partners

Explanation

Correct Answer

C:

Packet drops and voice degradation coincide with saturated outbound bandwidth, consistent with a wan congestion without voip quality-of-service prioritization.

Incorrect Answers

A:

RTP monitoring shows large variations in packet interarrival time rather than sustained congestion, consistent with a packet jitter harms real-time voip.

B:

The ISP radio signal and error rate worsen as the outdoor mount moves in wind, consistent with an unstable fixed wireless line-of-sight alignment.

D:

Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch.

Question 850

A technician has a tentative diagnosis for this incident: A shared office printer jams repeatedly at the same feeder corner and its paper-size guides are set for a wider tray than the actual paper. Which test result would support it most directly?

  1. The local device prints independently while the server's queued jobs remain stuck
  2. Removing and reseating the tray changes the sensor state while the tray's paper guides are correct
  3. The server sends a page-description format unsupported by the target printer model
  4. Sheets skew into the pickup path and the paper guides do not touch the loaded stack correctly

Explanation

Correct Answer

D:

Sheets skew into the pickup path and the paper guides do not touch the loaded stack correctly, consistent with a paper-feed guide misalignment.

Incorrect Answers

A:

The local device prints independently while the server's queued jobs remain stuck, consistent with a frozen print queue or spooler path.

B:

Removing and reseating the tray changes the sensor state while the tray's paper guides are correct, consistent with a paper tray detection sensor not actuated.

C:

The server sends a page-description format unsupported by the target printer model, consistent with a printer driver language mismatch.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests