Question 900 A maintenance window is available for the following problem: A phone connects to the same home Wi-Fi as other devices but loses Internet intermittently whenever it moves away from the access point. Which intervention is most appropriate? Verify antenna integrity and access-point coverage, then repair or change placement as appropriate Follow MDM incident procedure to isolate or remove the untrusted app and verify device integrity Run supported touch calibration or replace the digitizer assembly if its sensor is faulty Clean only by an approved safe method or service the damaged port Explanation Correct Answer A:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue. Incorrect Answers B:The questionable app has unusual permissions and its network activity aligns with the symptoms, consistent with a potentially malicious mobile application. C:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue. D:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port.
Question 901 The owner wants a specific repair, not merely more monitoring: A digitizer pen writes on a tablet only when the tip is pressed forcefully; finger touch input remains accurate. What should the technician do? Charge or replace the supported pen and inspect its tip before servicing the screen Use a compatible approved charger and cable supporting the necessary power profile Clean only by an approved safe method or service the damaged port Run supported touch calibration or replace the digitizer assembly if its sensor is faulty Explanation Correct Answer A:The stylus charge is depleted or its nib is worn while capacitive finger input works normally, consistent with an active stylus tip or battery fault. Incorrect Answers B:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. C:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port. D:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue.
Question 902 A smartphone refuses to install a large approved application and reports that local storage is full, while Wi-Fi and app-store sign-in both work. Which solution addresses the cause without unnecessary unrelated changes? Remove permitted local data or expand supported storage and retry the legitimate install Charge or replace the supported pen and inspect its tip before servicing the screen Stop charging temporarily, remove heat-trapping covers and follow safe temperature guidance Follow MDM incident procedure to isolate or remove the untrusted app and verify device integrity Explanation Correct Answer A:Storage settings show free space below the package and temporary install requirements, consistent with an insufficient free device storage for application install. Incorrect Answers B:The stylus charge is depleted or its nib is worn while capacitive finger input works normally, consistent with an active stylus tip or battery fault. C:Temperature falls when charging stops and the device is moved into shade with airflow, consistent with a mobile overheating from environmental heat and charging. D:The questionable app has unusual permissions and its network activity aligns with the symptoms, consistent with a potentially malicious mobile application.
Question 903 A tablet shows a normal image but tapping the upper-right corner activates controls several centimeters away. Which corrective action is the safest and most direct response? Verify antenna integrity and access-point coverage, then repair or change placement as appropriate Disconnect power, stop use and follow manufacturer liquid-damage inspection and service Run supported touch calibration or replace the digitizer assembly if its sensor is faulty Charge or replace the supported pen and inspect its tip before servicing the screen Explanation Correct Answer C:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue. Incorrect Answers A:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue. B:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage. D:The stylus charge is depleted or its nib is worn while capacitive finger input works normally, consistent with an active stylus tip or battery fault.
Question 904 A technician has authorization to fix the issue: A phone gets excessively hot only while charging inside a thick insulating case in direct sunlight. What action should be taken next? Clean only by an approved safe method or service the damaged port Follow MDM incident procedure to isolate or remove the untrusted app and verify device integrity Verify antenna integrity and access-point coverage, then repair or change placement as appropriate Stop charging temporarily, remove heat-trapping covers and follow safe temperature guidance Explanation Correct Answer D:Temperature falls when charging stops and the device is moved into shade with airflow, consistent with a mobile overheating from environmental heat and charging. Incorrect Answers A:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port. B:The questionable app has unusual permissions and its network activity aligns with the symptoms, consistent with a potentially malicious mobile application. C:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue.
Question 905 A managed phone develops sudden pop-ups and unexplained data use after a sideloaded app is installed, but hardware diagnostics pass. Which repair or configuration change addresses the underlying problem? Remove permitted local data or expand supported storage and retry the legitimate install Verify antenna integrity and access-point coverage, then repair or change placement as appropriate Follow MDM incident procedure to isolate or remove the untrusted app and verify device integrity Stop charging temporarily, remove heat-trapping covers and follow safe temperature guidance Explanation Correct Answer C:The questionable app has unusual permissions and its network activity aligns with the symptoms, consistent with a potentially malicious mobile application. Incorrect Answers A:Storage settings show free space below the package and temporary install requirements, consistent with an insufficient free device storage for application install. B:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue. D:Temperature falls when charging stops and the device is moved into shade with airflow, consistent with a mobile overheating from environmental heat and charging.
Question 906 A maintenance window is available for the following problem: Multiple desktops on one floor receive 169.254 addresses, but devices on a different floor get normal leases from the same central server. Which intervention is most appropriate? Restore the trusted certificate chain and correct managed Wi-Fi profile settings Restore the correct relay or VLAN path and verify scope availability Restore the approved port VLAN and verify default gateway and segmentation rules Correct the resolver configuration and test forward and reverse lookups as appropriate Explanation Correct Answer B:Lease requests from the affected VLAN do not arrive at the central DHCP service, consistent with a dhcp relay or vlan reachability failure. Incorrect Answers A:802.1X logs show the client rejects the RADIUS server certificate chain, consistent with an enterprise wi-fi certificate validation failure. C:The switch port's configured VLAN ID does not match the intended user network, consistent with an incorrect switch access vlan assignment. D:IP reachability succeeds but queries to the configured DNS server time out or return invalid results, consistent with a dns resolver misconfiguration.
Question 907 The owner wants a specific repair, not merely more monitoring: Users can ping a remote web server by IP but not by its fully qualified domain name after the company changed resolvers. What should the technician do? Restore the approved port VLAN and verify default gateway and segmentation rules Apply supported QoS and investigate the variable-delay path with jitter measurements Correct the resolver configuration and test forward and reverse lookups as appropriate Restore the correct relay or VLAN path and verify scope availability Explanation Correct Answer C:IP reachability succeeds but queries to the configured DNS server time out or return invalid results, consistent with a dns resolver misconfiguration. Incorrect Answers A:The switch port's configured VLAN ID does not match the intended user network, consistent with an incorrect switch access vlan assignment. B:RTP monitoring shows large variations in packet interarrival time rather than sustained congestion, consistent with a packet jitter harms real-time voip. D:Lease requests from the affected VLAN do not arrive at the central DHCP service, consistent with a dhcp relay or vlan reachability failure.
Question 908 Voice calls are choppy while total bandwidth is low because packet arrival varies greatly even though average latency is acceptable. Which solution addresses the cause without unnecessary unrelated changes? Improve network path latency and endpoint proximity Apply supported QoS and investigate the variable-delay path with jitter measurements Provide appropriate QoS and capacity for the link Configure a mutually supported VoIP codec and transcoding policy Explanation Correct Answer B:RTP monitoring shows large variations in packet interarrival time rather than sustained congestion, consistent with a packet jitter harms real-time voip. Incorrect Answers A:Round-trip delay is consistently excessive with little variation from packet to packet, consistent with a sustained high network latency. C:Monitoring records missing RTP sequence numbers during peak interface utilization, consistent with a voip packet loss due to saturated link. D:Both endpoints negotiate different unsupported voice codecs and fail to decode an established stream, consistent with a voice codec incompatibility.
Question 909 A wireless office sees frequent disconnections whenever a nearby microwave oven is running at lunchtime. Which corrective action is the safest and most direct response? Apply supported QoS and investigate the variable-delay path with jitter measurements Move critical clients to an appropriate band or change location and channel plan Configure compatible auto-negotiation or matching approved duplex settings on both ends Replace the defective cable and verify stable link status and error counters Explanation Correct Answer B:Spectrum activity rises near the microwave and the problem disappears when it is off, consistent with an external 2.4 ghz radio-frequency interference. Incorrect Answers A:RTP monitoring shows large variations in packet interarrival time rather than sustained congestion, consistent with a packet jitter harms real-time voip. C:Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch. D:Switch interface logs show repeated link-state transitions correlated with cable movement, consistent with a link flapping caused by physical cabling fault.
Question 910 A technician has authorization to fix the issue: Two Ethernet ports repeatedly transition up and down when a damaged cable is flexed, causing short network outages. What action should be taken next? Shorten or redesign the copper run and certify the installed cabling Move critical clients to an appropriate band or change location and channel plan Configure compatible auto-negotiation or matching approved duplex settings on both ends Replace the defective cable and verify stable link status and error counters Explanation Correct Answer D:Switch interface logs show repeated link-state transitions correlated with cable movement, consistent with a link flapping caused by physical cabling fault. Incorrect Answers A:Cable certification shows the run exceeds the supported channel length and has failing attenuation results, consistent with a copper link impairment from excessive cable length. B:Spectrum activity rises near the microwave and the problem disappears when it is off, consistent with an external 2.4 ghz radio-frequency interference. C:Interface counters show late collisions or FCS errors and duplex settings differ on link partners, consistent with an ethernet duplex mismatch.