McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 89

Question 880

In a separate fictional JNCIS-SP lab review for Orchard Link 220, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design. What is the direct residual network risk if the fault remains unresolved?

  1. IPv6 service fails across a still-configured but unusable tunnel.
  2. IPv6 Internet service fails while IPv4 peering looks healthy.
  3. Packets cannot reach the intended next hop despite a syntactically valid address.
  4. Packets to the customer prefix are dropped despite the static route statement being present.

Explanation

Correct Answer

C:

Packets cannot reach the intended next hop despite a syntactically valid address. Associate the link-local next hop with the correct egress interface and validate neighbor resolution. Link-local IPv6 addresses are scoped to a link and require an appropriate interface context.

Incorrect Answers

A:

IPv6 service fails across a still-configured but unusable tunnel. This relates to a case where an IPv6 service is carried through an IPv4 underlay, but the tunnel endpoint's IPv4 route has disappeared; the current situation is that an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design.

B:

IPv6 Internet service fails while IPv4 peering looks healthy. It is useful for situations where an established BGP peer exchanges IPv4 but rejects all authorized IPv6 prefixes due to a misplaced family-specific filter; the reported fault, though, is that an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design.

D:

Packets to the customer prefix are dropped despite the static route statement being present. This addresses a situation in which a provider edge has a static route for a customer prefix, but its next hop resolves only through a disconnected interface; however, an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design.

Question 881

At fictional Oakshore Peering 221, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. Which targeted remediation best fits the reported behavior?

  1. Correct the IPv6 family and import policy scope, then check received and advertised inet6 routes.
  2. Correct IPv6 next-hop reachability and inspect the inet6 routing and forwarding tables.
  3. Align the intended OSPF area on both endpoints and inspect neighbor state.
  4. Create the appropriate IPv6 address-family policy matching the approved prefixes.

Explanation

Correct Answer

D:

Create the appropriate IPv6 address-family policy matching the approved prefixes. Routing filters must match the relevant address family and intended prefix semantics. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked.

Incorrect Answers

A:

Correct the IPv6 family and import policy scope, then check received and advertised inet6 routes. This could help if an established BGP peer exchanges IPv4 but rejects all authorized IPv6 prefixes due to a misplaced family-specific filter, but not when a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

B:

Correct IPv6 next-hop reachability and inspect the inet6 routing and forwarding tables. This relates to a case where an IPv6 service prefix is configured with a next-hop address that does not resolve on the intended transit interface; the current situation is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

C:

Align the intended OSPF area on both endpoints and inspect neighbor state. It is useful for situations where two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs; the reported fault, though, is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 882

At fictional Oakshore Peering 221, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. Why is this particular correction the best fit for the stated defect?

  1. OSPFv3 carries IPv6 routing information and requires the relevant protocol context.
  2. Routing filters must match the relevant address family and intended prefix semantics.
  3. IPv4 and IPv6 route lookups use separate address-family tables.
  4. OSPF ABRs distribute appropriate interarea reachability without copying every internal LSA unchanged.

Explanation

Correct Answer

B:

Routing filters must match the relevant address family and intended prefix semantics. Create the appropriate IPv6 address-family policy matching the approved prefixes. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked.

Incorrect Answers

A:

OSPFv3 carries IPv6 routing information and requires the relevant protocol context. It is relevant if an IPv6 prefix is missing across a point-to-point link because OSPFv2 was configured but OSPFv3 was omitted, but the reported issue is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

C:

IPv4 and IPv6 route lookups use separate address-family tables. This relates to a case where a support engineer runs an IPv4 route lookup for an IPv6 destination and concludes the destination is not advertised; the current situation is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

D:

OSPF ABRs distribute appropriate interarea reachability without copying every internal LSA unchanged. It is useful for situations where a site advertises internal prefixes inside one area, but a remote OSPF area cannot learn them because the area border configuration is incomplete; the reported fault, though, is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 883

At fictional Oakshore Peering 221, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. What direct observation would prove the corrective action worked?

  1. The inet6 route is active and a controlled IPv6 probe reaches the prefix.
  2. Remote routers learn intended IPv6 prefixes and forward IPv6 probes end to end.
  3. The target table contains the approved route while unrelated tenant tables remain unchanged.
  4. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked.

Explanation

Correct Answer

D:

The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked. Routing filters must match the relevant address family and intended prefix semantics. Create the appropriate IPv6 address-family policy matching the approved prefixes.

Incorrect Answers

A:

The inet6 route is active and a controlled IPv6 probe reaches the prefix. This is applicable when an IPv6 service prefix is configured with a next-hop address that does not resolve on the intended transit interface; the present condition is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

B:

Remote routers learn intended IPv6 prefixes and forward IPv6 probes end to end. It is relevant if a core network runs IS-IS for IPv4 but has no IPv6 service reachability after dual-stack activation, but the reported issue is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

C:

The target table contains the approved route while unrelated tenant tables remain unchanged. This could help if a route intended for a monitoring routing table is missing because the RIB group does not include the recipient table, but not when a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 884

At fictional Oakshore Peering 221, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. Which failure consequence follows most closely from ignoring this issue?

  1. IPv6 routing does not converge across the link.
  2. IPv6 customers lose service even when IPv4 routing remains healthy.
  3. IPv6 traffic is entirely lost due to an unsuitable policy match.
  4. Subscribers see extended connectivity interruptions after routine link changes.

Explanation

Correct Answer

C:

IPv6 traffic is entirely lost due to an unsuitable policy match. Routing filters must match the relevant address family and intended prefix semantics. Create the appropriate IPv6 address-family policy matching the approved prefixes.

Incorrect Answers

A:

IPv6 routing does not converge across the link. That could help when an IPv6 prefix is missing across a point-to-point link because OSPFv2 was configured but OSPFv3 was omitted; here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

B:

IPv6 customers lose service even when IPv4 routing remains healthy. This is applicable when an IPv6 service prefix is configured with a next-hop address that does not resolve on the intended transit interface; the present condition is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

D:

Subscribers see extended connectivity interruptions after routine link changes. This could help if a redundant access network takes far too long to recover from a link failure because it uses inappropriate legacy STP behavior, but not when a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 885

In a separate fictional JNCIS-SP lab review for Brookridge Metro 222, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. What intervention most directly restores the intended routing or switching behavior?

  1. Create the appropriate IPv6 address-family policy matching the approved prefixes.
  2. Repair IPv4 underlay reachability to the tunnel endpoint before modifying IPv6 customer prefixes.
  3. Enable the supported IS-IS IPv6 reachability and confirm advertisements and routes.
  4. Synchronize the approved IS-IS authentication configuration across peers and verify secure adjacency.

Explanation

Correct Answer

A:

Create the appropriate IPv6 address-family policy matching the approved prefixes. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked. Routing filters must match the relevant address family and intended prefix semantics.

Incorrect Answers

B:

Repair IPv4 underlay reachability to the tunnel endpoint before modifying IPv6 customer prefixes. That could help when an IPv6 service is carried through an IPv4 underlay, but the tunnel endpoint's IPv4 route has disappeared; here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

C:

Enable the supported IS-IS IPv6 reachability and confirm advertisements and routes. This is applicable when a core network runs IS-IS for IPv4 but has no IPv6 service reachability after dual-stack activation; the present condition is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

D:

Synchronize the approved IS-IS authentication configuration across peers and verify secure adjacency. It is relevant if a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end, but the reported issue is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 886

In a separate fictional JNCIS-SP lab review for Brookridge Metro 222, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. Which networking principle explains why the proposed correction is appropriate?

  1. BGP multiprotocol families and matching policy control IPv6 route exchange.
  2. Routing filters must match the relevant address family and intended prefix semantics.
  3. Link-local IPv6 addresses are scoped to a link and require an appropriate interface context.
  4. BGP peers use negotiated timers to detect failed sessions and maintain liveness.

Explanation

Correct Answer

B:

Routing filters must match the relevant address family and intended prefix semantics. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked. Create the appropriate IPv6 address-family policy matching the approved prefixes.

Incorrect Answers

A:

BGP multiprotocol families and matching policy control IPv6 route exchange. It addresses a different problem: An established BGP peer exchanges IPv4 but rejects all authorized IPv6 prefixes due to a misplaced family-specific filter. Here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

C:

Link-local IPv6 addresses are scoped to a link and require an appropriate interface context. That could help when an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design; here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

D:

BGP peers use negotiated timers to detect failed sessions and maintain liveness. This is applicable when a neighboring BGP session resets frequently because the timer design is incompatible with observed transport conditions; the present condition is that a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 887

In a separate fictional JNCIS-SP lab review for Brookridge Metro 222, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. Which validation result would confirm the design is now functioning?

  1. The route resolves over the intended interface and IPv6 neighbor discovery succeeds.
  2. The expected IPv6 route and active forwarding next hop are visible in inet6 output.
  3. The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked.
  4. An MPLS-aware trace and service probe pass before and after the selected cutover.

Explanation

Correct Answer

C:

The authorized inet6 routes are accepted while prohibited IPv6 prefixes remain blocked. Create the appropriate IPv6 address-family policy matching the approved prefixes. Routing filters must match the relevant address family and intended prefix semantics.

Incorrect Answers

A:

The route resolves over the intended interface and IPv6 neighbor discovery succeeds. That option concerns an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design. The problem here is different: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

B:

The expected IPv6 route and active forwarding next hop are visible in inet6 output. It addresses a different problem: A support engineer runs an IPv4 route lookup for an IPv6 destination and concludes the destination is not advertised. Here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

D:

An MPLS-aware trace and service probe pass before and after the selected cutover. That could help when a new MPLS LSP is provisioned and traffic is moved before its end-to-end reachability has been tested; here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 888

In a separate fictional JNCIS-SP lab review for Brookridge Metro 222, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish. What likely service impact does this condition create?

  1. Packets cannot reach the intended next hop despite a syntactically valid address.
  2. IPv6 traffic is entirely lost due to an unsuitable policy match.
  3. A false no-route diagnosis delays the actual IPv6 repair.
  4. Traffic engineering decisions depend on a route attribute outside its applicable selection scope.

Explanation

Correct Answer

B:

IPv6 traffic is entirely lost due to an unsuitable policy match. Create the appropriate IPv6 address-family policy matching the approved prefixes. Routing filters must match the relevant address family and intended prefix semantics.

Incorrect Answers

A:

Packets cannot reach the intended next hop despite a syntactically valid address. The choice would be appropriate if an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design. Here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

C:

A false no-route diagnosis delays the actual IPv6 repair. It addresses a different problem: A support engineer runs an IPv4 route lookup for an IPv6 destination and concludes the destination is not advertised. Here, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

D:

Traffic engineering decisions depend on a route attribute outside its applicable selection scope. This could matter when a network expects MED to control all outbound peer choices even when comparing routes learned from unrelated neighboring autonomous systems. In this case, a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish.

Question 889

At fictional Stonefield Telecom 223, a regional service-provider network, during a two-site transit migration, operations observes: A configured GRE tunnel stays unusable after the remote outer IP endpoint changes. Which configuration or operational correction most directly addresses this failure?

  1. Update the tunnel endpoint and restore underlying IP reachability before testing overlay traffic.
  2. Ensure that the GRE outer endpoint resolves through the physical underlay instead of through the tunnel itself.
  3. Validate outer path, encapsulation counters, inner routing, and decapsulation at both ends.
  4. Configure and validate supported GRES readiness before an authorized controlled failover.

Explanation

Correct Answer

A:

Update the tunnel endpoint and restore underlying IP reachability before testing overlay traffic. GRE encapsulates inner packets in outer IP packets that must reach the remote tunnel endpoint. Outer reachability and an encapsulated test both succeed over the tunnel.

Incorrect Answers

B:

Ensure that the GRE outer endpoint resolves through the physical underlay instead of through the tunnel itself. The choice would be appropriate if a route to a GRE destination is learned through the same tunnel, creating recursive or looping resolution. Here, a configured GRE tunnel stays unusable after the remote outer IP endpoint changes.

C:

Validate outer path, encapsulation counters, inner routing, and decapsulation at both ends. That option concerns monitoring declares a GRE circuit healthy based on logical-interface status while no encapsulated user packets are delivered. The problem here is different: A configured GRE tunnel stays unusable after the remote outer IP endpoint changes.

D:

Configure and validate supported GRES readiness before an authorized controlled failover. It addresses a different problem: A planned Routing Engine switchover resets forwarding unexpectedly because chassis graceful switchover was not prepared. Here, a configured GRE tunnel stays unusable after the remote outer IP endpoint changes.

Question 890

At fictional Stonefield Telecom 223, a regional service-provider network, during a two-site transit migration, operations observes: A configured GRE tunnel stays unusable after the remote outer IP endpoint changes. Which Junos forwarding or control-plane rule applies to this case?

  1. A tunnel must not rely on its own encapsulated path to reach the outer endpoint.
  2. GRE encapsulates inner packets in outer IP packets that must reach the remote tunnel endpoint.
  3. Logical tunnel status alone is insufficient evidence of end-to-end overlay forwarding.
  4. Aggregate route eligibility depends on the presence of suitable contributing routes and policy conditions.

Explanation

Correct Answer

B:

GRE encapsulates inner packets in outer IP packets that must reach the remote tunnel endpoint. Update the tunnel endpoint and restore underlying IP reachability before testing overlay traffic. Outer reachability and an encapsulated test both succeed over the tunnel.

Incorrect Answers

A:

A tunnel must not rely on its own encapsulated path to reach the outer endpoint. That relates to circumstances in which a route to a GRE destination is learned through the same tunnel, creating recursive or looping resolution. Here the problem is that a configured GRE tunnel stays unusable after the remote outer IP endpoint changes.

C:

Logical tunnel status alone is insufficient evidence of end-to-end overlay forwarding. The choice would be appropriate if monitoring declares a GRE circuit healthy based on logical-interface status while no encapsulated user packets are delivered. Here, a configured GRE tunnel stays unusable after the remote outer IP endpoint changes.

D:

Aggregate route eligibility depends on the presence of suitable contributing routes and policy conditions. That option concerns a summary prefix is advertised even though operators have not confirmed which customer specifics contribute to it. The problem here is different: A configured GRE tunnel stays unusable after the remote outer IP endpoint changes.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests