Question 480In a separate fictional JNCIS-SP lab review for Orchard Link 120, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An upstream advertises a community tag to influence treatment but an import policy ignores the agreed meaning. What is the direct residual network risk if the fault remains unresolved? Intermittent route loss causes repeated customer outages. Attempts to fix policy distract from a network reachability failure. Dual-stack service is only partially operational. Traffic engineering intent fails despite the community being visible. ExplanationCorrect Answer D:Traffic engineering intent fails despite the community being visible. Add an explicit approved community match and verify the intended import or export action. BGP communities label routes for policy decisions only when a policy uses those labels. Incorrect Answers A:Intermittent route loss causes repeated customer outages. The choice would be appropriate if an upstream prefix repeatedly withdraws and returns but the operations view shows only the current best route. Here, an upstream advertises a community tag to influence treatment but an import policy ignores the agreed meaning. B:Attempts to fix policy distract from a network reachability failure. That option concerns a BGP peer has a correct AS number but cannot connect because its TCP transport address is unreachable. The problem here is different: An upstream advertises a community tag to influence treatment but an import policy ignores the agreed meaning. C:Dual-stack service is only partially operational. It addresses a different problem: A core network runs IS-IS for IPv4 but has no IPv6 service reachability after dual-stack activation. Here, an upstream advertises a community tag to influence treatment but an import policy ignores the agreed meaning.
Question 481At fictional Oakshore Peering 121, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. Which targeted remediation best fits the reported behavior? Restore consistent client-to-reflector peering and reachable loopback endpoints. Inspect AS path and applicable policy before changing unrelated preference settings. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. Assign a unique network entity title system identifier and verify database identities. ExplanationCorrect Answer C:Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. BGP route limits help contain unexpected prefix-volume changes from a neighbor. A controlled excess-route test triggers the intended protective response and logging. Incorrect Answers A:Restore consistent client-to-reflector peering and reachable loopback endpoints. This addresses a situation in which an internal client learns routes from another client only intermittently after the route-reflector peering address changes; however, a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. B:Inspect AS path and applicable policy before changing unrelated preference settings. The choice would be appropriate if an engineer blames BGP route rejection on local preference while a route carries an unexpected autonomous-system path. Here, a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:Assign a unique network entity title system identifier and verify database identities. It addresses a different problem: A device cloned from a lab template has the same IS-IS system ID as a production router. Here, a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 482At fictional Oakshore Peering 121, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. Why is this particular correction the best fit for the stated defect? BGP import policy governs which learned prefixes enter local route selection. BGP route stability depends on both peer health and consistent route advertisements. BGP route limits help contain unexpected prefix-volume changes from a neighbor. A calculated OSPF path is not a substitute for functional packet forwarding validation. ExplanationCorrect Answer C:BGP route limits help contain unexpected prefix-volume changes from a neighbor. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. A controlled excess-route test triggers the intended protective response and logging. Incorrect Answers A:BGP import policy governs which learned prefixes enter local route selection. That relates to circumstances in which a provider receives a customer-only prefix from a transit peer that should be blocked by an import policy. Here the problem is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. B:BGP route stability depends on both peer health and consistent route advertisements. This addresses a situation in which an upstream prefix repeatedly withdraws and returns but the operations view shows only the current best route; however, a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:A calculated OSPF path is not a substitute for functional packet forwarding validation. That option concerns an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path. The problem here is different: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 483At fictional Oakshore Peering 121, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. What direct observation would prove the corrective action worked? Both client sessions stabilize and expected reflected routes reach peers. Peer details show the intended internal AS relationship and routes propagate by design. The affected switches show the same region digest and expected per-instance port roles. A controlled excess-route test triggers the intended protective response and logging. ExplanationCorrect Answer D:A controlled excess-route test triggers the intended protective response and logging. BGP route limits help contain unexpected prefix-volume changes from a neighbor. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. Incorrect Answers A:Both client sessions stabilize and expected reflected routes reach peers. It is useful for situations where an internal client learns routes from another client only intermittently after the route-reflector peering address changes; the reported fault, though, is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. B:Peer details show the intended internal AS relationship and routes propagate by design. That relates to circumstances in which an operator configures an internal route-reflector session as EBGP and introduces an unintended AS boundary. Here the problem is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. C:The affected switches show the same region digest and expected per-instance port roles. This addresses a situation in which two interconnected switches place the same VLAN in different MSTP instances, leading to inconsistent blocking behavior; however, a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 484At fictional Oakshore Peering 121, a regional service-provider network, during a planned PE-to-core handoff, operations observes: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. Which failure consequence follows most closely from ignoring this issue? A route leak consumes routing resources and destabilizes production services. Services remain blackholed despite a received BGP update. IPv6 customers lose external paths despite healthy IPv4 peering. IPv6 traffic is entirely lost due to an unsuitable policy match. ExplanationCorrect Answer A:A route leak consumes routing resources and destabilizes production services. BGP route limits help contain unexpected prefix-volume changes from a neighbor. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. Incorrect Answers B:Services remain blackholed despite a received BGP update. It is useful for situations where an IBGP-learned external prefix is present but inactive because the advertised next-hop address has no IGP reachability; the reported fault, though, is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. C:IPv6 customers lose external paths despite healthy IPv4 peering. That relates to circumstances in which an IPv6 BGP session establishes at TCP level but does not exchange IPv6 reachability because the address family was not enabled. Here the problem is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:IPv6 traffic is entirely lost due to an unsuitable policy match. This addresses a situation in which a prefix-list filter written for IPv4 is applied conceptually to IPv6 routing, and all intended IPv6 routes vanish; however, a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 485In a separate fictional JNCIS-SP lab review for Brookridge Metro 122, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. What intervention most directly restores the intended routing or switching behavior? Inspect AS path and applicable policy before changing unrelated preference settings. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. Make the BGP next hop reachable through the designed IGP or appropriate next-hop policy. Validate both usable equal-cost paths and the forwarding-table load-balancing configuration. ExplanationCorrect Answer B:Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. A controlled excess-route test triggers the intended protective response and logging. BGP route limits help contain unexpected prefix-volume changes from a neighbor. Incorrect Answers A:Inspect AS path and applicable policy before changing unrelated preference settings. This could help if an engineer blames BGP route rejection on local preference while a route carries an unexpected autonomous-system path, but not when a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. C:Make the BGP next hop reachable through the designed IGP or appropriate next-hop policy. It is useful for situations where an IBGP-learned external prefix is present but inactive because the advertised next-hop address has no IGP reachability; the reported fault, though, is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:Validate both usable equal-cost paths and the forwarding-table load-balancing configuration. That relates to circumstances in which a provider expects two equal-cost links to share traffic, but forwarding consistently chooses one because the second next hop was not installed. Here the problem is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 486In a separate fictional JNCIS-SP lab review for Brookridge Metro 122, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. Which networking principle explains why the proposed correction is appropriate? An established BGP session does not by itself establish which received path will be preferred. Junos routing policy is evaluated by terms whose order and matching conditions affect the outcome. BGP route limits help contain unexpected prefix-volume changes from a neighbor. RSVP-TE can establish signaled LSPs subject to configured path constraints. ExplanationCorrect Answer C:BGP route limits help contain unexpected prefix-volume changes from a neighbor. A controlled excess-route test triggers the intended protective response and logging. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. Incorrect Answers A:An established BGP session does not by itself establish which received path will be preferred. It is relevant if a prefix switches BGP best paths and operators cannot explain the result because only peer state is monitored, but the reported issue is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. B:Junos routing policy is evaluated by terms whose order and matching conditions affect the outcome. This could help if a broad accept term in a BGP policy is evaluated before a specific reject term, letting unwanted routes through, but not when a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:RSVP-TE can establish signaled LSPs subject to configured path constraints. It is useful for situations where an RSVP-signaled LSP follows a congested transit hop instead of the approved engineered route; the reported fault, though, is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 487In a separate fictional JNCIS-SP lab review for Brookridge Metro 122, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. Which validation result would confirm the design is now functioning? Peer details show the intended internal AS relationship and routes propagate by design. A transport test reaches the peer and the BGP state advances to Established. A controlled excess-route test triggers the intended protective response and logging. The inet6 route is active and a controlled IPv6 probe reaches the prefix. ExplanationCorrect Answer C:A controlled excess-route test triggers the intended protective response and logging. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. BGP route limits help contain unexpected prefix-volume changes from a neighbor. Incorrect Answers A:Peer details show the intended internal AS relationship and routes propagate by design. This is applicable when an operator configures an internal route-reflector session as EBGP and introduces an unintended AS boundary; the present condition is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. B:A transport test reaches the peer and the BGP state advances to Established. It is relevant if a BGP peer has a correct AS number but cannot connect because its TCP transport address is unreachable, but the reported issue is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:The inet6 route is active and a controlled IPv6 probe reaches the prefix. This relates to a case where an IPv6 service prefix is configured with a next-hop address that does not resolve on the intended transit interface; the current situation is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 488In a separate fictional JNCIS-SP lab review for Brookridge Metro 122, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: A misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. What likely service impact does this condition create? A route leak consumes routing resources and destabilizes production services. IBGP clients lack complete reachability and use inconsistent exits. Traffic engineering decisions depend on a route attribute outside its applicable selection scope. An unnoticed bridging loop can trigger widespread broadcast storms. ExplanationCorrect Answer A:A route leak consumes routing resources and destabilizes production services. Apply the agreed route-limit safeguard and validate alerts and peer handling at controlled thresholds. BGP route limits help contain unexpected prefix-volume changes from a neighbor. Incorrect Answers B:IBGP clients lack complete reachability and use inconsistent exits. This is applicable when an internal client learns routes from another client only intermittently after the route-reflector peering address changes; the present condition is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. C:Traffic engineering decisions depend on a route attribute outside its applicable selection scope. It is relevant if a network expects MED to control all outbound peer choices even when comparing routes learned from unrelated neighboring autonomous systems, but the reported issue is that a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. D:An unnoticed bridging loop can trigger widespread broadcast storms. This could help if a switch port connecting another bridge is incorrectly marked as an edge port, weakening normal loop-avoidance behavior, but not when a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale.
Question 489At fictional Stonefield Telecom 123, a regional service-provider network, during a two-site transit migration, operations observes: A provider access port drops customer tagged frames because it was configured for untagged access mode. Which configuration or operational correction most directly addresses this failure? Constrain permitted VLAN membership and confirm unauthorized tag handling. Reconcile path MTU with the encapsulation overhead and test representative maximum frames. Match the interface VLAN tagging mode to the customer handoff contract and test ingress frames. Review negotiated hold time and keepalive settings alongside transport health, then correct the design. ExplanationCorrect Answer C:Match the interface VLAN tagging mode to the customer handoff contract and test ingress frames. An Ethernet port's VLAN tagging behavior must match the frames it receives. Tagged customer frames enter the intended VLAN while disallowed tags are rejected. Incorrect Answers A:Constrain permitted VLAN membership and confirm unauthorized tag handling. This could matter when an interface permits every customer VLAN tag despite a contract listing only two approved VLANs. In this case, a provider access port drops customer tagged frames because it was configured for untagged access mode. B:Reconcile path MTU with the encapsulation overhead and test representative maximum frames. That could help when a service-provider QinQ link carries small frames but drops customer frames when the extra VLAN header exceeds the link MTU; here, a provider access port drops customer tagged frames because it was configured for untagged access mode. D:Review negotiated hold time and keepalive settings alongside transport health, then correct the design. It is relevant if a neighboring BGP session resets frequently because the timer design is incompatible with observed transport conditions, but the reported issue is that a provider access port drops customer tagged frames because it was configured for untagged access mode.
Question 490At fictional Stonefield Telecom 123, a regional service-provider network, during a two-site transit migration, operations observes: A provider access port drops customer tagged frames because it was configured for untagged access mode. Which Junos forwarding or control-plane rule applies to this case? An Ethernet port's VLAN tagging behavior must match the frames it receives. Integrated routing and bridging links a bridge domain to an IP routing gateway. Layer 2 switching forwards traffic within the configured VLAN bridge domain. LDP discovery and the TCP-based LDP session depend on usable transport reachability. ExplanationCorrect Answer A:An Ethernet port's VLAN tagging behavior must match the frames it receives. Match the interface VLAN tagging mode to the customer handoff contract and test ingress frames. Tagged customer frames enter the intended VLAN while disallowed tags are rejected. Incorrect Answers B:Integrated routing and bridging links a bridge domain to an IP routing gateway. This could matter when customers on a bridged VLAN can exchange Layer 2 frames but cannot reach other subnets because the IRB gateway is absent. In this case, a provider access port drops customer tagged frames because it was configured for untagged access mode. C:Layer 2 switching forwards traffic within the configured VLAN bridge domain. That could help when hosts connected through a service-provider switch cannot exchange traffic because each port references a different VLAN identifier; here, a provider access port drops customer tagged frames because it was configured for untagged access mode. D:LDP discovery and the TCP-based LDP session depend on usable transport reachability. This is applicable when two core routers cannot form an LDP session even though they discover one another on the connected link; the present condition is that a provider access port drops customer tagged frames because it was configured for untagged access mode.