McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 53

Question 520

The owner wants a specific repair, not merely more monitoring: A business storage backplane uses enterprise SAS disks, while an off-the-shelf SATA-only controller cannot communicate with them. What should the technician do?

  1. Choose a supported SAS HBA or drive compatible with the storage controller
  2. Configure supported RAID 1 and monitor rebuild and backup procedures
  3. Configure RAID 10 using at least four drives and verify the supported failure combinations
  4. Use an M.2 SATA SSD supported by the slot or a platform offering NVMe

Explanation

Correct Answer

A:

The drive connector and controller specifications show SAS disks unsupported by the SATA-only host, consistent with a sas drive requires compatible controller interface.

Incorrect Answers

B:

The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks.

C:

The storage layout combines mirrors with striping across pairs rather than simple parity, consistent with a raid 10 striped mirrors.

D:

The device manual specifies SATA-based M.2 storage while the replacement requires PCIe NVMe, consistent with a m.2 physical form factor is not the storage protocol.

Question 521

A compact mini-tower chassis accepts only mini-ITX boards, but a technician orders a full-sized ATX motherboard. Which solution addresses the cause without unnecessary unrelated changes?

  1. Connect the front I/O cable to the specified matching header with power disconnected
  2. Select a CPU from the board's supported models or replace the board accordingly
  3. Use the authorized recovery key and reestablish trusted TPM binding with the asset owner
  4. Select a board matching the chassis and cooling, connector and expansion constraints

Explanation

Correct Answer

D:

The chassis standoff and I/O layout fit mini-ITX and not the dimensions of full ATX, consistent with a motherboard form-factor mismatch.

Incorrect Answers

A:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

B:

The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility.

C:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

Question 522

A desktop motherboard supports an Intel socket but the purchaser selects an AMD CPU with a different socket package. Which corrective action is the safest and most direct response?

  1. Use the authorized recovery key and reestablish trusted TPM binding with the asset owner
  2. Select a CPU from the board's supported models or replace the board accordingly
  3. Use a properly signed supported bootloader or authorized key-management procedure
  4. Select a board matching the chassis and cooling, connector and expansion constraints

Explanation

Correct Answer

B:

The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility.

Incorrect Answers

A:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

C:

Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.

D:

The chassis standoff and I/O layout fit mini-ITX and not the dimensions of full ATX, consistent with a motherboard form-factor mismatch.

Question 523

A technician has authorization to fix the issue: A laptop is configured to boot only signed loaders, but a replacement system image uses an unsigned bootloader and refuses to start. What action should be taken next?

  1. Select a CPU from the board's supported models or replace the board accordingly
  2. Use a properly signed supported bootloader or authorized key-management procedure
  3. Use the authorized recovery key and reestablish trusted TPM binding with the asset owner
  4. Set the supported OS boot manager first and remove stale removable boot entries

Explanation

Correct Answer

B:

Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.

Incorrect Answers

A:

The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility.

C:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

D:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

Question 524

A company's encryption key protector is intended to bind secrets to platform health, but a motherboard replacement leaves the TPM identity changed. Which repair or configuration change addresses the underlying problem?

  1. Connect the front I/O cable to the specified matching header with power disconnected
  2. Use a properly signed supported bootloader or authorized key-management procedure
  3. Select a CPU from the board's supported models or replace the board accordingly
  4. Use the authorized recovery key and reestablish trusted TPM binding with the asset owner

Explanation

Correct Answer

D:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

Incorrect Answers

A:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

B:

Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.

C:

The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility.

Question 525

A maintenance window is available for the following problem: An add-in graphics card needs full-length high-bandwidth expansion, but a small PCIe x1 slot is the only free slot. Which intervention is most appropriate?

  1. Use the authorized recovery key and reestablish trusted TPM binding with the asset owner
  2. Install in an appropriate compatible PCIe slot and ensure power and clearance
  3. Connect the correct PSU-provided PCIe power leads and verify capacity and routing
  4. Connect the front I/O cable to the specified matching header with power disconnected

Explanation

Correct Answer

B:

The card has an x16 edge connector and a specified lane and chassis-space requirement, consistent with a pcie x16 slot requirement for common graphics cards.

Incorrect Answers

A:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

C:

The GPU documentation requires a specific PCIe power plug and the connector is not attached, consistent with a missing gpu auxiliary pcie power connection.

D:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

Question 526

The owner wants a specific repair, not merely more monitoring: A desktop's front USB-C receptacle is present but never works because the motherboard cable is connected to the wrong internal header. What should the technician do?

  1. Select a board matching the chassis and cooling, connector and expansion constraints
  2. Connect the front I/O cable to the specified matching header with power disconnected
  3. Set the supported OS boot manager first and remove stale removable boot entries
  4. Use the authorized recovery key and reestablish trusted TPM binding with the asset owner

Explanation

Correct Answer

B:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

Incorrect Answers

A:

The chassis standoff and I/O layout fit mini-ITX and not the dimensions of full ATX, consistent with a motherboard form-factor mismatch.

C:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

D:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

Question 527

A PC can see a SATA drive but always boots from a disconnected USB flash drive entry before the internal OS disk. Which solution addresses the cause without unnecessary unrelated changes?

  1. Connect the front I/O cable to the specified matching header with power disconnected
  2. Enable the approved CPU virtualization setting in UEFI and verify hypervisor detection
  3. Set the supported OS boot manager first and remove stale removable boot entries
  4. Use a properly signed supported bootloader or authorized key-management procedure

Explanation

Correct Answer

C:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

Incorrect Answers

A:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

B:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

D:

Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.

Question 528

A virtual machine tool reports hardware acceleration unavailable on an x64 CPU known to support virtualization. Which corrective action is the safest and most direct response?

  1. Set the supported OS boot manager first and remove stale removable boot entries
  2. Power down and reconnect the CPU cooler to the appropriate monitored header
  3. Clean and reapply an appropriate thermal compound layer and reseat the cooler correctly
  4. Enable the approved CPU virtualization setting in UEFI and verify hypervisor detection

Explanation

Correct Answer

D:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

Incorrect Answers

A:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

B:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

C:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

Question 529

A technician has authorization to fix the issue: A PC's CPU heatsink was reinstalled without renewing dried thermal compound and reaches abnormal temperatures under load. What action should be taken next?

  1. Power down and reconnect the CPU cooler to the appropriate monitored header
  2. Enable the approved CPU virtualization setting in UEFI and verify hypervisor detection
  3. Clean and reapply an appropriate thermal compound layer and reseat the cooler correctly
  4. Connect the correct PSU-provided PCIe power leads and verify capacity and routing

Explanation

Correct Answer

C:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

Incorrect Answers

A:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

B:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

D:

The GPU documentation requires a specific PCIe power plug and the connector is not attached, consistent with a missing gpu auxiliary pcie power connection.

Question 530

A gaming desktop's graphics card requires a separate auxiliary power connector and crashes as soon as 3D load increases. Which repair or configuration change addresses the underlying problem?

  1. Clean and reapply an appropriate thermal compound layer and reseat the cooler correctly
  2. Connect the correct PSU-provided PCIe power leads and verify capacity and routing
  3. Install in an appropriate compatible PCIe slot and ensure power and clearance
  4. Power down and reconnect the CPU cooler to the appropriate monitored header

Explanation

Correct Answer

B:

The GPU documentation requires a specific PCIe power plug and the connector is not attached, consistent with a missing gpu auxiliary pcie power connection.

Incorrect Answers

A:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

C:

The card has an x16 edge connector and a specified lane and chassis-space requirement, consistent with a pcie x16 slot requirement for common graphics cards.

D:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests