McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 51

Question 500

A technician must attach a modern high-density fiber patch cord to LC ports on a switch rather than older larger SC sockets. Which repair or configuration change addresses the underlying problem?

  1. Use an appropriate LC-terminated patch lead with matching fiber and polarity
  2. Install compatible single-mode fiber and matching optical transceivers
  3. Use a compatible multimode fiber grade and connectors within the supported distance
  4. Use the correct interface and cable type for the intended phone or Ethernet circuit

Explanation

Correct Answer

A:

The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector.

Incorrect Answers

B:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

C:

The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link.

D:

The telephone plug is narrower and uses fewer positions than the structured Ethernet connector, consistent with a rj11 telephone and rj45 ethernet connector difference.

Question 501

A maintenance window is available for the following problem: A user has a digital monitor with DisplayPort and a workstation with only HDMI; a VGA cable is available but loses the required digital signal characteristics. Which intervention is most appropriate?

  1. Select the active digital input on the monitor and retest
  2. Select a converter explicitly supporting the required HDMI-source to DisplayPort-display direction
  3. Use a converter and cables rated for the chosen refresh and resolution
  4. Choose a tested directional active converter or compatible interface path as required

Explanation

Correct Answer

D:

The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.

Incorrect Answers

A:

A known-good DP signal reaches the display but the monitor is configured to listen to a different port, consistent with a monitor input-source mismatch.

B:

The passive adapter supports DP source to HDMI display, not an HDMI source to DP monitor, consistent with a passive displayport++ adapter used in the wrong direction.

C:

The link works at lower resolution but loses signal when switched to the highest output rate, consistent with an insufficient video bandwidth for selected resolution.

Question 502

The owner wants a specific repair, not merely more monitoring: A USB peripheral can run at SuperSpeed on one port but only at USB 2.0 rates on an old hub between it and the PC. What should the technician do?

  1. Replace the run with locally compliant outdoor cable and suitable grounding or surge protection
  2. Install compatible single-mode fiber and matching optical transceivers
  3. Use a SuperSpeed-capable hub and cable and verify negotiated link speed
  4. Choose a tested directional active converter or compatible interface path as required

Explanation

Correct Answer

C:

The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.

Incorrect Answers

A:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

B:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

D:

The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.

Question 503

A field network cable is buried directly between outdoor enclosures, but ordinary indoor cable has absorbed moisture and failed. Which solution addresses the cause without unnecessary unrelated changes?

  1. Replace the run with locally compliant outdoor cable and suitable grounding or surge protection
  2. Use a SuperSpeed-capable hub and cable and verify negotiated link speed
  3. Install compatible single-mode fiber and matching optical transceivers
  4. Choose a tested directional active converter or compatible interface path as required

Explanation

Correct Answer

A:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

Incorrect Answers

B:

The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.

C:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

D:

The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.

Question 504

A technician connects a four-position telephone line to an eight-position Ethernet jack and assumes the connectors are interchangeable. Which corrective action is the safest and most direct response?

  1. Replace the run with locally compliant outdoor cable and suitable grounding or surge protection
  2. Use an appropriate LC-terminated patch lead with matching fiber and polarity
  3. Install locally compliant plenum-rated structured cabling following code
  4. Use the correct interface and cable type for the intended phone or Ethernet circuit

Explanation

Correct Answer

D:

The telephone plug is narrower and uses fewer positions than the structured Ethernet connector, consistent with a rj11 telephone and rj45 ethernet connector difference.

Incorrect Answers

A:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

B:

The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector.

C:

The installation path is an air-handling plenum and the cable jacket is rated for that occupancy, consistent with a plenum-rated network cabling.

Question 505

A technician has authorization to fix the issue: A small laptop accepts a compact memory card that does not physically fit a full desktop motherboard's slot. What action should be taken next?

  1. Install the approved memory form factor for each platform
  2. Use a supported module density and total memory capacity or upgrade the platform
  3. Use memory of the board-supported DDR generation and supported speed
  4. Upgrade only the supported replaceable slot while accounting for fixed onboard capacity

Explanation

Correct Answer

A:

The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots, consistent with a sodimm versus full-size dimm form factors.

Incorrect Answers

B:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

C:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

D:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

Question 506

A desktop is built for DDR5, but a technician tries to use a spare DDR4 module of the same nominal capacity. Which repair or configuration change addresses the underlying problem?

  1. Use memory of the board-supported DDR generation and supported speed
  2. Choose a platform and modules that explicitly support working ECC protection
  3. Verify CPU and board-supported profiles and use stable approved memory timings
  4. Populate the channel-paired slots according to the board manual and verify channel mode

Explanation

Correct Answer

A:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

Incorrect Answers

B:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

C:

Firmware reports the lower negotiated memory rate despite a higher-rated module installed, consistent with a memory clock limited by platform and shared settings.

D:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

Question 507

A maintenance window is available for the following problem: A workstation running critical calculations needs detection and correction of many single-bit memory errors, but the proposed board cannot use ECC memory. Which intervention is most appropriate?

  1. Use a supported module density and total memory capacity or upgrade the platform
  2. Use memory of the board-supported DDR generation and supported speed
  3. Choose a platform and modules that explicitly support working ECC protection
  4. Populate the channel-paired slots according to the board manual and verify channel mode

Explanation

Correct Answer

C:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

Incorrect Answers

A:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

B:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

D:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

Question 508

The owner wants a specific repair, not merely more monitoring: A desktop contains two matching memory modules but both are fitted in slots reserved for a single channel on its board. What should the technician do?

  1. Upgrade only the supported replaceable slot while accounting for fixed onboard capacity
  2. Populate the channel-paired slots according to the board manual and verify channel mode
  3. Choose a platform and modules that explicitly support working ECC protection
  4. Use a supported module density and total memory capacity or upgrade the platform

Explanation

Correct Answer

B:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

Incorrect Answers

A:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

C:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

D:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

Question 509

An office PC with an old chipset does not recognize the full capacity of two high-density DIMMs despite both fitting physically. Which solution addresses the cause without unnecessary unrelated changes?

  1. Install the approved memory form factor for each platform
  2. Populate the channel-paired slots according to the board manual and verify channel mode
  3. Verify CPU and board-supported profiles and use stable approved memory timings
  4. Use a supported module density and total memory capacity or upgrade the platform

Explanation

Correct Answer

D:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

Incorrect Answers

A:

The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots, consistent with a sodimm versus full-size dimm form factors.

B:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

C:

Firmware reports the lower negotiated memory rate despite a higher-rated module installed, consistent with a memory clock limited by platform and shared settings.

Question 510

A laptop has one replaceable SODIMM but the remaining memory is permanently soldered to the motherboard. Which corrective action is the safest and most direct response?

  1. Install the approved memory form factor for each platform
  2. Populate the channel-paired slots according to the board manual and verify channel mode
  3. Upgrade only the supported replaceable slot while accounting for fixed onboard capacity
  4. Choose a platform and modules that explicitly support working ECC protection

Explanation

Correct Answer

C:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

Incorrect Answers

A:

The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots, consistent with a sodimm versus full-size dimm form factors.

B:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

D:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests