McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 50

Question 490

A maintenance window is available for the following problem: A graphic artist requires a portable monitor with true blacks, but the selected display shows grayish black in a dark room even at low brightness. Which intervention is most appropriate?

  1. Choose a suitable self-emissive OLED display if true per-pixel black is essential
  2. Choose a VA panel after comparing measured contrast and viewing-angle requirements
  3. Select an IPS panel suited to wide-angle color work rather than increasing pixel count
  4. Configure a supported refresh setting and adaptive sync if both display and GPU support it

Explanation

Correct Answer

A:

Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.

Incorrect Answers

B:

The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast, consistent with a va lcd alignment emphasizes contrast.

C:

Color and contrast shift dramatically with viewing angle even when brightness is stable, consistent with a limited viewing angles of a tn lcd panel.

D:

The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.

Question 491

The owner wants a specific repair, not merely more monitoring: A touchscreen laptop shows the image correctly and a USB mouse works, but taps register several centimeters from the point touched. What should the technician do?

  1. Run supported touch calibration and inspect the digitizer cable before replacing the display assembly
  2. Select an IPS panel suited to wide-angle color work rather than increasing pixel count
  3. Choose a suitable self-emissive OLED display if true per-pixel black is essential
  4. Configure a supported refresh setting and adaptive sync if both display and GPU support it

Explanation

Correct Answer

A:

Touch coordinates are offset while video output and external pointer positioning remain accurate, consistent with a touch digitizer calibration or sensor fault.

Incorrect Answers

B:

Color and contrast shift dramatically with viewing angle even when brightness is stable, consistent with a limited viewing angles of a tn lcd panel.

C:

Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.

D:

The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.

Question 492

A workstation monitor feels smooth at 60 Hz but moving text tears during high-frame-rate applications because display timing is mismatched. Which solution addresses the cause without unnecessary unrelated changes?

  1. Configure a supported refresh setting and adaptive sync if both display and GPU support it
  2. Select a display with suitable pixel density and verify the OS scaling for readable text
  3. Choose a suitable self-emissive OLED display if true per-pixel black is essential
  4. Run supported touch calibration and inspect the digitizer cable before replacing the display assembly

Explanation

Correct Answer

A:

The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.

Incorrect Answers

B:

The higher-resolution panel contains more addressable pixels across the same diagonal dimension, consistent with a higher pixel density at fixed screen size.

C:

Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.

D:

Touch coordinates are offset while video output and external pointer positioning remain accurate, consistent with a touch digitizer calibration or sensor fault.

Question 493

A technician has authorization to fix the issue: A photo editor wants a backlit LCD with good contrast for dark scenes but is willing to accept narrower off-axis consistency than IPS. What action should be taken next?

  1. Select a suitable mini-LED backlit display and evaluate blooming near bright objects
  2. Choose a suitable self-emissive OLED display if true per-pixel black is essential
  3. Configure a supported refresh setting and adaptive sync if both display and GPU support it
  4. Choose a VA panel after comparing measured contrast and viewing-angle requirements

Explanation

Correct Answer

D:

The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast, consistent with a va lcd alignment emphasizes contrast.

Incorrect Answers

A:

The display uses many small independently controlled backlight zones behind an LCD layer, consistent with a mini-led local dimming backlight.

B:

Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.

C:

The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.

Question 494

A conference room needs an LCD whose backlight can dim small areas for high dynamic range rather than one uniform brightness plane. Which repair or configuration change addresses the underlying problem?

  1. Select a suitable mini-LED backlit display and evaluate blooming near bright objects
  2. Select a display with suitable pixel density and verify the OS scaling for readable text
  3. Choose a VA panel after comparing measured contrast and viewing-angle requirements
  4. Choose a suitable self-emissive OLED display if true per-pixel black is essential

Explanation

Correct Answer

A:

The display uses many small independently controlled backlight zones behind an LCD layer, consistent with a mini-led local dimming backlight.

Incorrect Answers

B:

The higher-resolution panel contains more addressable pixels across the same diagonal dimension, consistent with a higher pixel density at fixed screen size.

C:

The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast, consistent with a va lcd alignment emphasizes contrast.

D:

Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.

Question 495

A maintenance window is available for the following problem: A designer compares two screens of equal physical size and notices one makes fine text sharper because it has more pixels per inch. Which intervention is most appropriate?

  1. Select a suitable mini-LED backlit display and evaluate blooming near bright objects
  2. Choose a suitable self-emissive OLED display if true per-pixel black is essential
  3. Select a display with suitable pixel density and verify the OS scaling for readable text
  4. Configure a supported refresh setting and adaptive sync if both display and GPU support it

Explanation

Correct Answer

C:

The higher-resolution panel contains more addressable pixels across the same diagonal dimension, consistent with a higher pixel density at fixed screen size.

Incorrect Answers

A:

The display uses many small independently controlled backlight zones behind an LCD layer, consistent with a mini-led local dimming backlight.

B:

Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.

D:

The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.

Question 496

The owner wants a specific repair, not merely more monitoring: A building crew must route Ethernet above a drop ceiling used to circulate environmental air, where fire code requires low-smoke cable jackets. What should the technician do?

  1. Replace the run with locally compliant outdoor cable and suitable grounding or surge protection
  2. Install compatible single-mode fiber and matching optical transceivers
  3. Use appropriately grounded shielded cabling or reroute the link away from interference
  4. Install locally compliant plenum-rated structured cabling following code

Explanation

Correct Answer

D:

The installation path is an air-handling plenum and the cable jacket is rated for that occupancy, consistent with a plenum-rated network cabling.

Incorrect Answers

A:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

B:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

C:

Signal errors correlate with motor operation and the proposed cable has foil or braid shielding, consistent with a shielded twisted-pair cable for an emi-prone route.

Question 497

A network run shares a cable tray with motors and experiences induced electrical noise on unshielded twisted pairs. Which solution addresses the cause without unnecessary unrelated changes?

  1. Install compatible single-mode fiber and matching optical transceivers
  2. Choose a tested directional active converter or compatible interface path as required
  3. Use appropriately grounded shielded cabling or reroute the link away from interference
  4. Install locally compliant plenum-rated structured cabling following code

Explanation

Correct Answer

C:

Signal errors correlate with motor operation and the proposed cable has foil or braid shielding, consistent with a shielded twisted-pair cable for an emi-prone route.

Incorrect Answers

A:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

B:

The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.

D:

The installation path is an air-handling plenum and the cable jacket is rated for that occupancy, consistent with a plenum-rated network cabling.

Question 498

A campus needs a long fiber run between distant buildings with optics rated for a narrow-core light path. Which corrective action is the safest and most direct response?

  1. Use a compatible multimode fiber grade and connectors within the supported distance
  2. Install compatible single-mode fiber and matching optical transceivers
  3. Use appropriately grounded shielded cabling or reroute the link away from interference
  4. Use a SuperSpeed-capable hub and cable and verify negotiated link speed

Explanation

Correct Answer

B:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

Incorrect Answers

A:

The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link.

C:

Signal errors correlate with motor operation and the proposed cable has foil or braid shielding, consistent with a shielded twisted-pair cable for an emi-prone route.

D:

The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.

Question 499

A technician has authorization to fix the issue: A short datacenter optical link is specified with multimode SR transceivers and cost-effective larger-core fiber. What action should be taken next?

  1. Install compatible single-mode fiber and matching optical transceivers
  2. Use an appropriate LC-terminated patch lead with matching fiber and polarity
  3. Use a compatible multimode fiber grade and connectors within the supported distance
  4. Use a SuperSpeed-capable hub and cable and verify negotiated link speed

Explanation

Correct Answer

C:

The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link.

Incorrect Answers

A:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

B:

The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector.

D:

The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.

Question 500

A technician must attach a modern high-density fiber patch cord to LC ports on a switch rather than older larger SC sockets. Which repair or configuration change addresses the underlying problem?

  1. Use an appropriate LC-terminated patch lead with matching fiber and polarity
  2. Install compatible single-mode fiber and matching optical transceivers
  3. Use a compatible multimode fiber grade and connectors within the supported distance
  4. Use the correct interface and cable type for the intended phone or Ethernet circuit

Explanation

Correct Answer

A:

The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector.

Incorrect Answers

B:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

C:

The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link.

D:

The telephone plug is narrower and uses fewer positions than the structured Ethernet connector, consistent with a rj11 telephone and rj45 ethernet connector difference.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests