McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 13

Question 120

In a separate fictional JNCIS-SP lab review for Seabrook Metro 030, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: An engineer reports recovery because a route appears in protocol output, but the hardware forwarding table still lacks a usable next hop. What likely service impact does this condition create?

  1. Packets to the customer prefix are dropped despite the static route statement being present.
  2. Customers lose an intended default path even though the local route definition still exists.
  3. Packets continue dropping while monitoring incorrectly reports routing as healthy.
  4. A route leak consumes routing resources and destabilizes production services.

Explanation

Correct Answer

C:

Packets continue dropping while monitoring incorrectly reports routing as healthy. Compare protocol route state with the active route and forwarding-table next-hop installation. Learning a route in a protocol does not by itself prove it is active or installed for forwarding.

Incorrect Answers

A:

Packets to the customer prefix are dropped despite the static route statement being present. The choice would be appropriate if a provider edge has a static route for a customer prefix, but its next hop resolves only through a disconnected interface. Here, an engineer reports recovery because a route appears in protocol output, but the hardware forwarding table still lacks a usable next hop.

B:

Customers lose an intended default path even though the local route definition still exists. That option concerns a generated default route unexpectedly disappears after the upstream routing policy rejects its contributing route. The problem here is different: An engineer reports recovery because a route appears in protocol output, but the hardware forwarding table still lacks a usable next hop.

D:

A route leak consumes routing resources and destabilizes production services. This could matter when a misconfigured customer sends thousands of unintended routes and overwhelms the expected BGP peering scale. In this case, an engineer reports recovery because a route appears in protocol output, but the hardware forwarding table still lacks a usable next hop.

Question 121

At fictional Northpoint Access 031, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. Which configuration or operational correction most directly addresses this failure?

  1. Make the timer settings compatible across the shared link and monitor the neighbor exchange.
  2. Align the intended OSPF area on both endpoints and inspect neighbor state.
  3. Confirm the DR and BDR election and distinguish the required adjacency state for each neighbor relationship.
  4. Configure and validate supported GRES readiness before an authorized controlled failover.

Explanation

Correct Answer

B:

Align the intended OSPF area on both endpoints and inspect neighbor state. OSPF neighbors need compatible area context to exchange database information. Both endpoints reach the expected adjacency state and share matching area membership.

Incorrect Answers

A:

Make the timer settings compatible across the shared link and monitor the neighbor exchange. This addresses a situation in which OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template; however, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

Confirm the DR and BDR election and distinguish the required adjacency state for each neighbor relationship. That option concerns on a broadcast segment, one non-designated router shows a peer at 2-Way and an operator incorrectly treats it as a failure. The problem here is different: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

D:

Configure and validate supported GRES readiness before an authorized controlled failover. It addresses a different problem: A planned Routing Engine switchover resets forwarding unexpectedly because chassis graceful switchover was not prepared. Here, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 122

At fictional Northpoint Access 031, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. Which Junos forwarding or control-plane rule applies to this case?

  1. OSPF interface network type influences neighbor discovery and DR behavior.
  2. A passive interface can advertise connected reachability without sending OSPF hellos to customers.
  3. IPv6-over-IPv4 tunnels depend on the transport underlay used to carry encapsulated traffic.
  4. OSPF neighbors need compatible area context to exchange database information.

Explanation

Correct Answer

D:

OSPF neighbors need compatible area context to exchange database information. Align the intended OSPF area on both endpoints and inspect neighbor state. Both endpoints reach the expected adjacency state and share matching area membership.

Incorrect Answers

A:

OSPF interface network type influences neighbor discovery and DR behavior. That relates to circumstances in which OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology. Here the problem is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

B:

A passive interface can advertise connected reachability without sending OSPF hellos to customers. This addresses a situation in which a provider PE inadvertently attempts to form an OSPF adjacency on a customer LAN that should advertise reachability only; however, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

IPv6-over-IPv4 tunnels depend on the transport underlay used to carry encapsulated traffic. The choice would be appropriate if an IPv6 service is carried through an IPv4 underlay, but the tunnel endpoint's IPv4 route has disappeared. Here, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 123

At fictional Northpoint Access 031, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. What operational evidence best establishes successful remediation?

  1. Operational output identifies the intended DR and BDR and database exchange stays stable.
  2. Each device shows a distinct router ID and neighbors exchange consistent LSDB entries.
  3. The route table and forwarding lookup show the expected metric-driven next hop.
  4. Both endpoints reach the expected adjacency state and share matching area membership.

Explanation

Correct Answer

D:

Both endpoints reach the expected adjacency state and share matching area membership. OSPF neighbors need compatible area context to exchange database information. Align the intended OSPF area on both endpoints and inspect neighbor state.

Incorrect Answers

A:

Operational output identifies the intended DR and BDR and database exchange stays stable. It is useful for situations where an unplanned access router becomes designated router after its interface receives an unexpectedly high priority; the reported fault, though, is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

B:

Each device shows a distinct router ID and neighbors exchange consistent LSDB entries. That relates to circumstances in which two routers in the same routing domain advertise the same OSPF router ID after cloning a lab template. Here the problem is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

The route table and forwarding lookup show the expected metric-driven next hop. This addresses a situation in which the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change; however, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 124

At fictional Northpoint Access 031, a regional service-provider network, during a planned PE-to-core handoff, operations observes: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. Which operational harm would persist without the intended correction?

  1. Control-plane churn follows repeated elections among unsuitable devices.
  2. The IGP cannot distribute transit reachability over the circuit.
  3. Unauthorized OSPF adjacency could expose route-control information to customer equipment.
  4. Some routers calculate stale paths and cannot reach required loopbacks.

Explanation

Correct Answer

B:

The IGP cannot distribute transit reachability over the circuit. OSPF neighbors need compatible area context to exchange database information. Align the intended OSPF area on both endpoints and inspect neighbor state.

Incorrect Answers

A:

Control-plane churn follows repeated elections among unsuitable devices. This relates to a case where an unplanned access router becomes designated router after its interface receives an unexpectedly high priority; the current situation is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

Unauthorized OSPF adjacency could expose route-control information to customer equipment. That relates to circumstances in which a provider PE inadvertently attempts to form an OSPF adjacency on a customer LAN that should advertise reachability only. Here the problem is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

D:

Some routers calculate stale paths and cannot reach required loopbacks. This addresses a situation in which a remote PE misses a new loopback route because IS-IS link-state flooding is incomplete after an adjacency reset; however, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 125

In a separate fictional JNCIS-SP lab review for Linden Point 032, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. What should the Junos specialist change first to resolve this specific fault?

  1. Stabilize the underlying neighbor relationship and verify refreshed LSA lifetimes.
  2. Align the intended OSPF area on both endpoints and inspect neighbor state.
  3. Confirm the DR and BDR election and distinguish the required adjacency state for each neighbor relationship.
  4. Confirm MED comparison applicability and use a suitable local outbound policy if needed.

Explanation

Correct Answer

B:

Align the intended OSPF area on both endpoints and inspect neighbor state. Both endpoints reach the expected adjacency state and share matching area membership. OSPF neighbors need compatible area context to exchange database information.

Incorrect Answers

A:

Stabilize the underlying neighbor relationship and verify refreshed LSA lifetimes. This could help if an OSPF route vanishes intermittently because a neighbor cannot refresh topology information after repeated link resets, but not when two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

Confirm the DR and BDR election and distinguish the required adjacency state for each neighbor relationship. It is useful for situations where on a broadcast segment, one non-designated router shows a peer at 2-Way and an operator incorrectly treats it as a failure; the reported fault, though, is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

D:

Confirm MED comparison applicability and use a suitable local outbound policy if needed. That relates to circumstances in which a network expects MED to control all outbound peer choices even when comparing routes learned from unrelated neighboring autonomous systems. Here the problem is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 126

In a separate fictional JNCIS-SP lab review for Linden Point 032, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. What technical principle underlies the right remedy?

  1. OSPF shortest-path calculations rely on consistent synchronized link-state information within an area.
  2. OSPF neighbors need compatible area context to exchange database information.
  3. OSPF ABRs distribute appropriate interarea reachability without copying every internal LSA unchanged.
  4. Layer 2 switching forwards traffic within the configured VLAN bridge domain.

Explanation

Correct Answer

B:

OSPF neighbors need compatible area context to exchange database information. Both endpoints reach the expected adjacency state and share matching area membership. Align the intended OSPF area on both endpoints and inspect neighbor state.

Incorrect Answers

A:

OSPF shortest-path calculations rely on consistent synchronized link-state information within an area. It is relevant if two supposed adjacent routers have different views of a backbone link because database synchronization never completes, but the reported issue is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

OSPF ABRs distribute appropriate interarea reachability without copying every internal LSA unchanged. This relates to a case where a site advertises internal prefixes inside one area, but a remote OSPF area cannot learn them because the area border configuration is incomplete; the current situation is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

D:

Layer 2 switching forwards traffic within the configured VLAN bridge domain. It is useful for situations where hosts connected through a service-provider switch cannot exchange traffic because each port references a different VLAN identifier; the reported fault, though, is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 127

In a separate fictional JNCIS-SP lab review for Linden Point 032, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. Which acceptance finding demonstrates the affected service has recovered?

  1. Both endpoints reach the expected adjacency state and share matching area membership.
  2. The circuit forms the expected point-to-point adjacency without an unwanted DR election.
  3. Operational output identifies the intended DR and BDR and database exchange stays stable.
  4. The penultimate and egress forwarding entries match the intended label disposition.

Explanation

Correct Answer

A:

Both endpoints reach the expected adjacency state and share matching area membership. Align the intended OSPF area on both endpoints and inspect neighbor state. OSPF neighbors need compatible area context to exchange database information.

Incorrect Answers

B:

The circuit forms the expected point-to-point adjacency without an unwanted DR election. It is relevant if OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology, but the reported issue is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

C:

Operational output identifies the intended DR and BDR and database exchange stays stable. This could help if an unplanned access router becomes designated router after its interface receives an unexpectedly high priority, but not when two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

D:

The penultimate and egress forwarding entries match the intended label disposition. This relates to a case where an operator sees the transport label removed near the egress and flags a failure despite the design allowing PHP; the current situation is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 128

In a separate fictional JNCIS-SP lab review for Linden Point 032, a carrier-edge and core routing team, following an audit of service-provider handoff behavior, engineers find: Two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs. What is the direct residual network risk if the fault remains unresolved?

  1. Routing connectivity fails or a poorly scoped workaround weakens control-plane trust.
  2. Duplicate identity produces unstable topology and confusing route calculations.
  3. The IGP cannot distribute transit reachability over the circuit.
  4. A single uplink becomes overloaded while redundant capacity remains idle.

Explanation

Correct Answer

C:

The IGP cannot distribute transit reachability over the circuit. Align the intended OSPF area on both endpoints and inspect neighbor state. OSPF neighbors need compatible area context to exchange database information.

Incorrect Answers

A:

Routing connectivity fails or a poorly scoped workaround weakens control-plane trust. That could help when a newly hardened OSPF transit link stops exchanging neighbors because its authentication parameters do not agree; here, two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

B:

Duplicate identity produces unstable topology and confusing route calculations. This is applicable when two routers in the same routing domain advertise the same OSPF router ID after cloning a lab template; the present condition is that two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

D:

A single uplink becomes overloaded while redundant capacity remains idle. This could help if a provider expects two equal-cost links to share traffic, but forwarding consistently chooses one because the second next hop was not installed, but not when two provider routers on a point-to-point circuit cannot form an OSPF adjacency because their interfaces use different area IDs.

Question 129

At fictional Harborview ISP 033, a regional service-provider network, during a two-site transit migration, operations observes: OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template. Which targeted remediation best fits the reported behavior?

  1. Make the timer settings compatible across the shared link and monitor the neighbor exchange.
  2. Confirm the DR and BDR election and distinguish the required adjacency state for each neighbor relationship.
  3. Review planned OSPF costs in both directions and correct the traffic-engineering values.
  4. Interpret MPLS TTL and traceroute behavior using the configured transport model.

Explanation

Correct Answer

A:

Make the timer settings compatible across the shared link and monitor the neighbor exchange. OSPF neighbor formation requires appropriate compatible adjacency parameters. Neighbor state stabilizes and hello and dead intervals match on both endpoints.

Incorrect Answers

B:

Confirm the DR and BDR election and distinguish the required adjacency state for each neighbor relationship. That could help when on a broadcast segment, one non-designated router shows a peer at 2-Way and an operator incorrectly treats it as a failure; here, OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template.

C:

Review planned OSPF costs in both directions and correct the traffic-engineering values. This is applicable when provider traffic takes a long backup path because OSPF interface costs were changed inconsistently; the present condition is that OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template.

D:

Interpret MPLS TTL and traceroute behavior using the configured transport model. It is relevant if traceroute across an MPLS core shows fewer visible routers than expected and engineers assume the packets are taking a forbidden shortcut, but the reported issue is that OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template.

Question 130

At fictional Harborview ISP 033, a regional service-provider network, during a two-site transit migration, operations observes: OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template. Why is this particular correction the best fit for the stated defect?

  1. OSPF interface network type influences neighbor discovery and DR behavior.
  2. OSPF neighbor formation requires appropriate compatible adjacency parameters.
  3. A calculated OSPF path is not a substitute for functional packet forwarding validation.
  4. IS-IS levels separate routing scope and require a deliberate interlevel reachability design.

Explanation

Correct Answer

B:

OSPF neighbor formation requires appropriate compatible adjacency parameters. Make the timer settings compatible across the shared link and monitor the neighbor exchange. Neighbor state stabilizes and hello and dead intervals match on both endpoints.

Incorrect Answers

A:

OSPF interface network type influences neighbor discovery and DR behavior. It addresses a different problem: OSPF adjacency setup fails on a network whose configured link type does not reflect point-to-point topology. Here, OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template.

C:

A calculated OSPF path is not a substitute for functional packet forwarding validation. That could help when an engineer sees an OSPF route in the routing table and closes the incident without testing the egress path; here, OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template.

D:

IS-IS levels separate routing scope and require a deliberate interlevel reachability design. This is applicable when an L1-only site lacks an approved route to reach destinations in the backbone after a level-transition change; the present condition is that OSPF neighbors remain down after one endpoint inherits a different hello and dead timer template.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests