McAfee Secured

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

100% Huawei H12-821 Guaranteed Success With Testking Training Materials

Get Real H12-821 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 61

Question 600

The datacom engineering team at a satellite ground station operator after an incident review reviews this independent fictional networking case: Branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR. The team applies this remedy: Align the totally stub area behavior at the ABR and verify the intended default-based forwarding. Which observation would directly demonstrate that this specific issue is resolved?

  1. The ABR default route appears in the stub area and external destinations remain reachable
  2. The redistributed prefix is present as Type-7 in the NSSA and appropriate external form beyond it
  3. Remote OSPF routers receive the summary and reach all intended attached external subnets
  4. Branch route tables contain the intended default rather than the unexpected interarea prefixes

Explanation

Correct Answer

D:

Branch route tables contain the intended default rather than the unexpected interarea prefixes. This is a directly observable check for the proposed correction: Align the totally stub area behavior at the ABR and verify the intended default-based forwarding. The particular failure being investigated is: Branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR.

Incorrect Answers

A:

The ABR default route appears in the stub area and external destinations remain reachable. That result could validate a repair when an engineer expects Type-5 external LSAs inside an OSPF stub area and mistakes their absence for a routing fault. Here, branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR; totally stubby configuration suppresses most interarea summaries while retaining the area default route.

B:

When an NSSA branch redistributes a local static route that fails to appear as expected outside the NSSA, a result such as this is useful: The redistributed prefix is present as Type-7 in the NSSA and appropriate external form beyond it. For the reported fault, branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR; align the totally stub area behavior at the ABR and verify the intended default-based forwarding.

C:

When an ASBR emits hundreds of connected external prefixes individually and overwhelms branch route tables, a result such as this is useful: Remote OSPF routers receive the summary and reach all intended attached external subnets. For the reported fault, branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR; uncontrolled interarea route leakage increases route churn at constrained branch devices.

Question 601

The datacom engineering team at a call center outsourcer after a planned hardware refresh reviews this independent fictional networking case: A security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets. Which corrective engineering action most directly addresses this problem?

  1. Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny
  2. Define QoS trust boundaries and explicitly preserve authorized DSCP mappings across the interconnect
  3. Place the filter on the correct ingress or egress direction based on the observed packet path
  4. Apply appropriate traffic shaping at the controlled egress and verify contracted rate behavior

Explanation

Correct Answer

C:

Place the filter on the correct ingress or egress direction based on the observed packet path. This is the specific action that addresses the fictional fault: A security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets. The governing technical reason is: ACL matching is evaluated at the attachment point and direction, not according to a rule's descriptive name. Verify by checking: Counters increment for prohibited guest probes and approved management flows remain permitted.

Incorrect Answers

A:

A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Reordering and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny can respond to that condition, but it would not correct the reported fault: A security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets. ACL matching is evaluated at the attachment point and direction, not according to a rule's descriptive name.

B:

Delay-sensitive packets leave the campus with voice markings but are remarked to best-effort at a trusted border. This is where defining QoS trust boundaries and explicitly preserve authorized DSCP mappings across the interconnect would help. By contrast, a security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets. Place the filter on the correct ingress or egress direction based on the observed packet path.

D:

When a WAN service sees bursts dropped after an engineer enables policing where buffering and smoothing was the actual service objective, applying appropriate traffic shaping at the controlled egress and verifying contracted rate behavior could be appropriate. Here, a security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets. Counters increment for prohibited guest probes and approved management flows remain permitted.

Question 602

The datacom engineering team at a regional telecommunications carrier during a controlled network cutover reviews this independent fictional networking case: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Which corrective engineering action most directly addresses this problem?

  1. Specify the appropriate egress interface with the link-local next hop and verify neighbor discovery
  2. Correct router advertisement prefix and flags for the chosen IPv6 addressing design
  3. Resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior
  4. Set an appropriate maximum-prefix threshold and test the negotiated recovery behavior

Explanation

Correct Answer

B:

Correct router advertisement prefix and flags for the chosen IPv6 addressing design. This is the specific action that addresses the fictional fault: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. The governing technical reason is: SLAAC relies on received router advertisement prefix information and associated address configuration flags. Verify by checking: Clients form valid unique global addresses and default routes from the expected RA source.

Incorrect Answers

A:

An IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. This is where specifying the appropriate egress interface with the link-local next hop and verifying neighbor discovery would help. By contrast, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. SLAAC relies on received router advertisement prefix information and associated address configuration flags.

C:

Two replacement servers are configured with the same IPv6 address and one fails to bring the address online. This is where resolving duplicate addressing and verifying Neighbor Discovery duplicate-address-detection behavior would help. By contrast, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Correct router advertisement prefix and flags for the chosen IPv6 addressing design.

D:

A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. Setting an appropriate maximum-prefix threshold and testing the negotiated recovery behavior can respond to that condition, but it would not correct the reported fault: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Clients form valid unique global addresses and default routes from the expected RA source.

Question 603

The datacom engineering team at a research instrumentation firm while validating change-control evidence reviews this independent fictional networking case: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. Which corrective engineering action most directly addresses this problem?

  1. Align the totally stub area behavior at the ABR and verify the intended default-based forwarding
  2. Reestablish a contiguous backbone design and use any supported temporary virtual link only with documented constraints
  3. Reconcile the actual link MTU and OSPF database exchange compatibility before retransmitting LSAs
  4. Mark host-facing interfaces passive while still advertising their connected subnet through the intended OSPF process

Explanation

Correct Answer

C:

Reconcile the actual link MTU and OSPF database exchange compatibility before retransmitting LSAs. This is the specific action that addresses the fictional fault: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. The governing technical reason is: MTU incompatibility can disrupt OSPF database description negotiation and leave neighbors partially adjacent. Verify by checking: Database description exchange completes and the OSPF neighbor reaches Full state.

Incorrect Answers

A:

Branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR. Aligning the totally stub area behavior at the ABR and verifying the intended default-based forwarding can respond to that condition, but it would not correct the reported fault: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. MTU incompatibility can disrupt OSPF database description negotiation and leave neighbors partially adjacent.

B:

Two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. Reestablishing a contiguous backbone design and using any supported temporary virtual link only with documented constraints can respond to that condition, but it would not correct the reported fault: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. Reconcile the actual link MTU and OSPF database exchange compatibility before retransmitting LSAs.

D:

Marking host-facing interfaces passive while still advertising their connected subnet through the intended OSPF process is relevant when a user-facing VLAN unnecessarily sends OSPF Hello packets and briefly forms a neighbor with an unauthorized test appliance. It does not resolve this case: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. Database description exchange completes and the OSPF neighbor reaches Full state.

Question 604

The datacom engineering team at a satellite ground station operator after an incident review reviews this independent fictional networking case: An IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. The team applies this remedy: Specify the appropriate egress interface with the link-local next hop and verify neighbor discovery. Which observation would directly demonstrate that this specific issue is resolved?

  1. Clients form valid unique global addresses and default routes from the expected RA source
  2. The conflicting address is removed and DAD completes without duplicate notifications
  3. A controlled member failure leaves dual-homed access services reachable and stack roles recover
  4. The route installs with the expected interface and reachability probes succeed

Explanation

Correct Answer

D:

The route installs with the expected interface and reachability probes succeed. This is a directly observable check for the proposed correction: Specify the appropriate egress interface with the link-local next hop and verify neighbor discovery. The particular failure being investigated is: An IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly.

Incorrect Answers

A:

When clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information, a result such as this is useful: Clients form valid unique global addresses and default routes from the expected RA source. For the reported fault, an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly; IPv6 link-local addresses are interface scoped and may require egress context for next-hop resolution.

B:

When two replacement servers are configured with the same IPv6 address and one fails to bring the address online, a result such as this is useful: The conflicting address is removed and DAD completes without duplicate notifications. For the reported fault, an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly; specify the appropriate egress interface with the link-local next hop and verify neighbor discovery.

C:

A stack member fails and connected access ports remain inaccessible because redundancy and member-level uplink placement were not reviewed. A controlled member failure leaves dual-homed access services reachable and stack roles recover. This observation does not prove the correction for the reported defect: An IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. Ambiguous link-local next hops can make IPv6 forwarding fail despite apparently valid prefixes.

Question 605

The datacom engineering team at an air-cargo logistics operator during a network security audit reviews this independent fictional networking case: A BGP-learned route remains visible but is rejected from the forwarding table because its next hop resolves to a failed IGP link. A proposed remedy is: Repair next-hop recursion and underlying IGP convergence, not just the BGP session. Which technical principle most directly supports this remedy?

  1. Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale
  2. Route reflection replaces full-mesh iBGP peering while preserving loop-prevention attributes
  3. eBGP session establishment validates the expected remote AS during OPEN negotiation
  4. BGP route eligibility depends on resolvable next hops and a functioning forwarding path

Explanation

Correct Answer

D:

BGP route eligibility depends on resolvable next hops and a functioning forwarding path. This directly explains why the corrective operation is appropriate: Repair next-hop recursion and underlying IGP convergence, not just the BGP session. The observed acceptance evidence should be: The best BGP route resolves to a live next hop and data-plane probes succeed after reconvergence.

Incorrect Answers

A:

A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale. The current condition differs: A BGP-learned route remains visible but is rejected from the forwarding table because its next hop resolves to a failed IGP link. BGP route eligibility depends on resolvable next hops and a functioning forwarding path.

B:

A growing datacenter iBGP full mesh becomes operationally difficult and newly added peers lack complete route distribution. Route reflection replaces full-mesh iBGP peering while preserving loop-prevention attributes. The current condition differs: A BGP-learned route remains visible but is rejected from the forwarding table because its next hop resolves to a failed IGP link. Repair next-hop recursion and underlying IGP convergence, not just the BGP session.

C:

When an edge router repeatedly resets its eBGP session because the configured peer AS number differs from the provider's actual AS, eBGP session establishment validates the expected remote AS during OPEN negotiation. By contrast, a BGP-learned route remains visible but is rejected from the forwarding table because its next hop resolves to a failed IGP link; the best BGP route resolves to a live next hop and data-plane probes succeed after reconvergence.

Question 606

The datacom engineering team at a cloud hosting provider after an incident review reviews this independent fictional networking case: IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass. The team applies this remedy: Verify physical MTU, CLNS frame transport and IS-IS padding support along the circuit. Which observation would directly demonstrate that this specific issue is resolved?

  1. IS-IS hellos and LSP floods succeed and the remote LSDB converges
  2. Each participating router reports the intended metric and selects consistent next hops
  3. Traces avoid the recovering node until readiness and return afterward without loss
  4. Peers converge to the same current LSP sequence and the affected route becomes stable

Explanation

Correct Answer

A:

IS-IS hellos and LSP floods succeed and the remote LSDB converges. This is a directly observable check for the proposed correction: Verify physical MTU, CLNS frame transport and IS-IS padding support along the circuit. The particular failure being investigated is: IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass.

Incorrect Answers

B:

Each participating router reports the intended metric and selects consistent next hops. This check belongs to a new core route using a large IS-IS metric is interpreted inconsistently where devices use incompatible metric styles. The actual defect is different: IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass. IS-IS uses link-layer CLNS protocol exchanges that may fail despite healthy IPv4 user traffic.

C:

A router recovering from reboot begins attracting transit traffic before its route state is ready. Traces avoid the recovering node until readiness and return afterward without loss. This observation does not prove the correction for the reported defect: IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass. Verify physical MTU, CLNS frame transport and IS-IS padding support along the circuit.

D:

Peers converge to the same current LSP sequence and the affected route becomes stable. This check belongs to core routers disagree about an IS-IS route after a node restart because LSP versions and flooding state have not synchronized. The actual defect is different: IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass. Incorrect assumptions about IP reachability can mask unformed IS-IS adjacencies.

Question 607

The datacom engineering team at an insurance processing company while validating change-control evidence reviews this independent fictional networking case: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. A superficially Up IKE session can conceal complete loss of protected service traffic
  2. A NAT-only repair can leave return traffic asymmetric and business sessions broken
  3. A missing fallback can prevent safe restoration during an identity infrastructure incident
  4. Blanket permissive workarounds can open lateral movement paths between restricted zones

Explanation

Correct Answer

B:

A NAT-only repair can leave return traffic asymmetric and business sessions broken. Leaving the exact fault unresolved means: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. The intended response is: Validate NAT rule matching and the effective route lookup for the translated flow.

Incorrect Answers

A:

A superficially Up IKE session can conceal complete loss of protected service traffic. That consequence could follow when two VPN gateways establish IKE but fail to pass the intended private subnet because their phase-two traffic selectors do not agree. Here, a firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway; NAT changes packet addressing, but traffic still requires a correct routed egress and return path.

C:

A missing fallback can prevent safe restoration during an identity infrastructure incident. That consequence could follow when a campus authentication server becomes unreachable and network admins cannot access devices during an outage. Here, a firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway; validate NAT rule matching and the effective route lookup for the translated flow.

D:

When a permitted application remains blocked when crossing the Huawei firewall because the zone pairing and rule match conditions are incorrect, blanket permissive workarounds can open lateral movement paths between restricted zones. The present failure is different: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. Session/NAT records and bidirectional traces show the intended translated tuple and next hop.

Question 608

The datacom engineering team at an agricultural equipment distributor after an incident review reviews this independent fictional networking case: OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. Which corrective engineering action most directly addresses this problem?

  1. Enable supported BFD tracking for the OSPF adjacency and validate timer compatibility
  2. Correct VRRP group placement and virtual IPv4 address on the intended broadcast domain
  3. Verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover
  4. Check supported BFD modes and mutually acceptable timer negotiation before coupling routing failover

Explanation

Correct Answer

A:

Enable supported BFD tracking for the OSPF adjacency and validate timer compatibility. This is the specific action that addresses the fictional fault: OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. The governing technical reason is: BFD provides rapid bidirectional failure detection to subscribed routing protocols. Verify by checking: During a planned circuit interruption, BFD detects failure and routing reconverges within the operational target.

Incorrect Answers

B:

Two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. This is where correcting VRRP group placement and virtual IPv4 address on the intended broadcast domain would help. By contrast, OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. BFD provides rapid bidirectional failure detection to subscribed routing protocols.

C:

A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. This is where verifying the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover would help. By contrast, OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. Enable supported BFD tracking for the OSPF adjacency and validate timer compatibility.

D:

Checking supported BFD modes and mutually acceptable timer negotiation before coupling routing failover is relevant when two vendors' routers never bring BFD Up because one side uses unsupported or incompatible negotiated timing behavior. It does not resolve this case: OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. During a planned circuit interruption, BFD detects failure and routing reconverges within the operational target.

Question 609

The datacom engineering team at a university research campus while tracing a degraded application flow reviews this independent fictional networking case: Core routers disagree about an IS-IS route after a node restart because LSP versions and flooding state have not synchronized. The team applies this remedy: Compare sequence numbers and lifetime state, then restore proper CSNP/PSNP-driven LSP synchronization. Which observation would directly demonstrate that this specific issue is resolved?

  1. IS-IS hellos and LSP floods succeed and the remote LSDB converges
  2. Each participating router reports the intended metric and selects consistent next hops
  3. The upstream reports intended MED attributes and observed ingress tracks the agreed policy
  4. Peers converge to the same current LSP sequence and the affected route becomes stable

Explanation

Correct Answer

D:

Peers converge to the same current LSP sequence and the affected route becomes stable. This is a directly observable check for the proposed correction: Compare sequence numbers and lifetime state, then restore proper CSNP/PSNP-driven LSP synchronization. The particular failure being investigated is: Core routers disagree about an IS-IS route after a node restart because LSP versions and flooding state have not synchronized.

Incorrect Answers

A:

IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass. IS-IS hellos and LSP floods succeed and the remote LSDB converges. This observation does not prove the correction for the reported defect: Core routers disagree about an IS-IS route after a node restart because LSP versions and flooding state have not synchronized. IS-IS link-state consistency depends on reliable LSP version synchronization within each level.

B:

A new core route using a large IS-IS metric is interpreted inconsistently where devices use incompatible metric styles. Each participating router reports the intended metric and selects consistent next hops. This observation does not prove the correction for the reported defect: Core routers disagree about an IS-IS route after a node restart because LSP versions and flooding state have not synchronized. Compare sequence numbers and lifetime state, then restore proper CSNP/PSNP-driven LSP synchronization.

C:

The upstream reports intended MED attributes and observed ingress tracks the agreed policy. This check belongs to two routes from the same upstream AS choose an undesired interconnect because MED values are not consistently planned. The actual defect is different: Core routers disagree about an IS-IS route after a node restart because LSP versions and flooding state have not synchronized. Stale link-state information can create asymmetric paths and packet loss.

Question 610

The datacom engineering team at a warehouse automation provider during a topology consistency review reviews this independent fictional networking case: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Which corrective engineering action most directly addresses this problem?

  1. Tag redistributed routes and deny re-entry of the marked route class at the opposite redistribution point
  2. Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny
  3. Define QoS trust boundaries and explicitly preserve authorized DSCP mappings across the interconnect
  4. Add health-aware policy-path handling or withdraw the policy on next-hop failure

Explanation

Correct Answer

B:

Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny. This is the specific action that addresses the fictional fault: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. The governing technical reason is: Sequential route-policy matches can terminate evaluation and make later rules unreachable. Verify by checking: Matched-rule counters and received-route sets show only intended prefixes accepted.

Incorrect Answers

A:

Two redistribution points repeatedly re-inject learned routes between OSPF and another IGP and churn route entries. This is where tagging redistributed routes and deny re-entry of the marked route class at the opposite redistribution point would help. By contrast, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Sequential route-policy matches can terminate evaluation and make later rules unreachable.

C:

When delay-sensitive packets leave the campus with voice markings but are remarked to best-effort at a trusted border, defining QoS trust boundaries and explicitly preserve authorized DSCP mappings across the interconnect could be appropriate. Here, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny.

D:

Policy-based routing forces finance traffic through an unavailable inspection appliance even though the regular route table has a valid path. This is where adding health-aware policy-path handling or withdraw the policy on next-hop failure would help. By contrast, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Matched-rule counters and received-route sets show only intended prefixes accepted.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests