McAfee Secured

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

100% Huawei H12-821 Guaranteed Success With Testking Training Materials

Get Real H12-821 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 63

Question 620

The datacom engineering team at a regional telecommunications carrier during a controlled network cutover reviews this independent fictional networking case: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. A proposed remedy is: Correct router advertisement prefix and flags for the chosen IPv6 addressing design. Which technical principle most directly supports this remedy?

  1. IPv6 link-local addresses are interface scoped and may require egress context for next-hop resolution
  2. IPv6 DAD uses neighbor solicitation to detect duplicate addresses before regular use
  3. SLAAC relies on received router advertisement prefix information and associated address configuration flags
  4. An OSPF neighbor pair must agree on the area identity for the common link

Explanation

Correct Answer

C:

SLAAC relies on received router advertisement prefix information and associated address configuration flags. This directly explains why the corrective operation is appropriate: Correct router advertisement prefix and flags for the chosen IPv6 addressing design. The observed acceptance evidence should be: Clients form valid unique global addresses and default routes from the expected RA source.

Incorrect Answers

A:

IPv6 link-local addresses are interface scoped and may require egress context for next-hop resolution. That principle is relevant when an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. Here, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information; SLAAC relies on received router advertisement prefix information and associated address configuration flags.

B:

When two replacement servers are configured with the same IPv6 address and one fails to bring the address online, IPv6 DAD uses neighbor solicitation to detect duplicate addresses before regular use. By contrast, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information; correct router advertisement prefix and flags for the chosen IPv6 addressing design.

D:

When two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10, an OSPF neighbor pair must agree on the area identity for the common link. By contrast, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information; clients form valid unique global addresses and default routes from the expected RA source.

Question 621

The datacom engineering team at an insurance processing company while validating change-control evidence reviews this independent fictional networking case: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. Which corrective engineering action most directly addresses this problem?

  1. Restrict management access to approved administrative source networks and enforce strong authentication
  2. Validate NAT rule matching and the effective route lookup for the translated flow
  3. Test and configure a properly controlled emergency local access method consistent with AAA policy
  4. Align the protected subnet selectors and routing for the authorized tunnel traffic

Explanation

Correct Answer

B:

Validate NAT rule matching and the effective route lookup for the translated flow. This is the specific action that addresses the fictional fault: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. The governing technical reason is: NAT changes packet addressing, but traffic still requires a correct routed egress and return path. Verify by checking: Session/NAT records and bidirectional traces show the intended translated tuple and next hop.

Incorrect Answers

A:

A router's SSH management listener is reachable from an untrusted guest subnet after a VLAN redesign. This is where restricting management access to approved administrative source networks and enforcing strong authentication would help. By contrast, a firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. NAT changes packet addressing, but traffic still requires a correct routed egress and return path.

C:

A campus authentication server becomes unreachable and network admins cannot access devices during an outage. Testing and configuring a properly controlled emergency local access method consistent with AAA policy can respond to that condition, but it would not correct the reported fault: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. Validate NAT rule matching and the effective route lookup for the translated flow.

D:

Aligning the protected subnet selectors and routing for the authorized tunnel traffic is relevant when two VPN gateways establish IKE but fail to pass the intended private subnet because their phase-two traffic selectors do not agree. It does not resolve this case: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. Session/NAT records and bidirectional traces show the intended translated tuple and next hop.

Question 622

The datacom engineering team at an automotive parts manufacturer as part of an acceptance test reviews this independent fictional networking case: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. The team applies this remedy: Verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover. Which observation would directly demonstrate that this specific issue is resolved?

  1. Matching gateway interfaces negotiate one Master and user devices reach the correct virtual address
  2. Host neighbor tables resolve to the expected virtual MAC and sessions recover after failover
  3. An injected upstream failure withdraws the primary route and backup traffic succeeds
  4. Primary uplink failure transfers Master to the router with valid outbound reachability

Explanation

Correct Answer

B:

Host neighbor tables resolve to the expected virtual MAC and sessions recover after failover. This is a directly observable check for the proposed correction: Verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover. The particular failure being investigated is: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache.

Incorrect Answers

A:

When two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error, a result such as this is useful: Matching gateway interfaces negotiate one Master and user devices reach the correct virtual address. For the reported fault, a host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache; VRRP continuity depends on end hosts and switches forwarding toward the current virtual gateway owner.

C:

A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. An injected upstream failure withdraws the primary route and backup traffic succeeds. This observation does not prove the correction for the reported defect: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. Verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover.

D:

Primary uplink failure transfers Master to the router with valid outbound reachability. This check belongs to a VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational. The actual defect is different: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. Stale gateway MAC learning can prolong an otherwise successful VRRP switchover.

Question 623

The datacom engineering team at an industrial safety organization during a simulated failover test reviews this independent fictional networking case: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. The team applies this remedy: Verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover. Which observation would directly demonstrate that this specific issue is resolved?

  1. Both peers display Up state and a controlled liveness fault produces a consistent Down event
  2. Host neighbor tables resolve to the expected virtual MAC and sessions recover after failover
  3. Primary uplink failure transfers Master to the router with valid outbound reachability
  4. An injected upstream failure withdraws the primary route and backup traffic succeeds

Explanation

Correct Answer

B:

Host neighbor tables resolve to the expected virtual MAC and sessions recover after failover. This is a directly observable check for the proposed correction: Verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover. The particular failure being investigated is: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache.

Incorrect Answers

A:

Two vendors' routers never bring BFD Up because one side uses unsupported or incompatible negotiated timing behavior. Both peers display Up state and a controlled liveness fault produces a consistent Down event. This observation does not prove the correction for the reported defect: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. VRRP continuity depends on end hosts and switches forwarding toward the current virtual gateway owner.

C:

When a VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational, a result such as this is useful: Primary uplink failure transfers Master to the router with valid outbound reachability. For the reported fault, a host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache; verify the virtual gateway MAC behavior and gratuitous ARP handling during VRRP failover.

D:

An injected upstream failure withdraws the primary route and backup traffic succeeds. This check belongs to a static backup path remains inactive while the primary next hop fails beyond a locally Up interface. The actual defect is different: A host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. Stale gateway MAC learning can prolong an otherwise successful VRRP switchover.

Question 624

The datacom engineering team at an e-commerce fulfillment center while validating change-control evidence reviews this independent fictional networking case: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Lack of controlled interarea aggregation increases flooding and update workload during access failures
  2. A partial OSPF exchange leaves inconsistent topology knowledge and traffic black holes
  3. Unaggregated external advertisements can magnify flaps across the routing domain
  4. Uncontrolled interarea route leakage increases route churn at constrained branch devices

Explanation

Correct Answer

A:

Lack of controlled interarea aggregation increases flooding and update workload during access failures. Leaving the exact fault unresolved means: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. The intended response is: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes.

Incorrect Answers

B:

A partial OSPF exchange leaves inconsistent topology knowledge and traffic black holes. That risk belongs to a separate condition: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. Here, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied; aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space.

C:

When an ASBR emits hundreds of connected external prefixes individually and overwhelms branch route tables, unaggregated external advertisements can magnify flaps across the routing domain. The present failure is different: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes.

D:

Branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR. In that situation, uncontrolled interarea route leakage increases route churn at constrained branch devices. Here instead, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. The backbone receives the intended summary and test routes to each component subnet succeed.

Question 625

The datacom engineering team at a government service campus after a monitored link change reviews this independent fictional networking case: An enterprise polls infrastructure over legacy unauthenticated SNMP and risks exposing operational data across shared networks. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Insecure polling can leak topology and configuration metadata to untrusted observers
  2. Missing relay leaves clients with no usable lease despite a healthy remote DHCP server
  3. Controller single points of failure can disrupt an entire campus WLAN
  4. Accidental region borders reduce planned load sharing and may alter blocked ports

Explanation

Correct Answer

A:

Insecure polling can leak topology and configuration metadata to untrusted observers. Leaving the exact fault unresolved means: An enterprise polls infrastructure over legacy unauthenticated SNMP and risks exposing operational data across shared networks. The intended response is: Use supported SNMPv3 authentication/privacy and authorize specific management targets.

Incorrect Answers

B:

When newly moved office endpoints cannot receive IPv4 leases because their DHCP server is across a routed interface without a relay, missing relay leaves clients with no usable lease despite a healthy remote DHCP server. The present failure is different: An enterprise polls infrastructure over legacy unauthenticated SNMP and risks exposing operational data across shared networks. Network management polling should use authenticated and encrypted protocol settings when sensitive telemetry is exposed.

C:

Controller single points of failure can disrupt an entire campus WLAN. That consequence could follow when a wireless controller outage disconnects all thin APs because they were provisioned without a reachable standby controller. Here, an enterprise polls infrastructure over legacy unauthenticated SNMP and risks exposing operational data across shared networks; use supported SNMPv3 authentication/privacy and authorize specific management targets.

D:

Two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit. In that situation, accidental region borders reduce planned load sharing and may alter blocked ports. Here instead, an enterprise polls infrastructure over legacy unauthenticated SNMP and risks exposing operational data across shared networks. Approved collectors receive data with validated SNMPv3 security and unauthenticated polls are rejected.

Question 626

The datacom engineering team at a film production studio as part of an acceptance test reviews this independent fictional networking case: An accidental /32 internal loopback is advertised to an Internet transit peer due to an overbroad export filter. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Incorrect MED assumptions can cause uneven interconnect load and unpredictable ingress
  2. A visible BGP prefix can still hide a black hole if forwarding recursion is stale
  3. An unrestricted export policy may leak internal infrastructure addresses beyond the organization
  4. Misconfigured reflection can create route loops and unstable reachability

Explanation

Correct Answer

C:

An unrestricted export policy may leak internal infrastructure addresses beyond the organization. Leaving the exact fault unresolved means: An accidental /32 internal loopback is advertised to an Internet transit peer due to an overbroad export filter. The intended response is: Apply explicit prefix-length-aware export policy limited to authorized aggregate space.

Incorrect Answers

A:

Incorrect MED assumptions can cause uneven interconnect load and unpredictable ingress. That risk belongs to a separate condition: Two routes from the same upstream AS choose an undesired interconnect because MED values are not consistently planned. Here, an accidental /32 internal loopback is advertised to an Internet transit peer due to an overbroad export filter; prefix lists and route policies should enforce precise permitted address and mask ranges at external boundaries.

B:

When a BGP-learned route remains visible but is rejected from the forwarding table because its next hop resolves to a failed IGP link, a visible BGP prefix can still hide a black hole if forwarding recursion is stale. The present failure is different: An accidental /32 internal loopback is advertised to an Internet transit peer due to an overbroad export filter. Apply explicit prefix-length-aware export policy limited to authorized aggregate space.

D:

An iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. In that situation, misconfigured reflection can create route loops and unstable reachability. Here instead, an accidental /32 internal loopback is advertised to an Internet transit peer due to an overbroad export filter. Exported BGP routes contain only the authorized prefix and mask set.

Question 627

The datacom engineering team at an agricultural equipment distributor after an incident review reviews this independent fictional networking case: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Control-plane reachability can conceal production packet loss until the forwarding pipeline is verified
  2. A stray specific route can silently bypass the preferred security inspection path
  3. Slow liveness detection can extend avoidable black-hole duration after link failure
  4. Unresolved recursive next hops create a persistent black hole despite syntactically valid configuration

Explanation

Correct Answer

D:

Unresolved recursive next hops create a persistent black hole despite syntactically valid configuration. Leaving the exact fault unresolved means: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. The intended response is: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop.

Incorrect Answers

A:

Newly installed routers accept control sessions but transit packets fail because an upstream line card has not finished installing forwarding entries. In that situation, control-plane reachability can conceal production packet loss until the forwarding pipeline is verified. Here instead, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active. A static route depending on recursive resolution cannot forward when its next-hop recursion fails.

B:

A stray specific route can silently bypass the preferred security inspection path. That risk belongs to a separate condition: A branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; provide a resolvable route to the next hop or replace it with the verified directly reachable next hop.

C:

Slow liveness detection can extend avoidable black-hole duration after link failure. That consequence could follow when OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; the static route is active and its recursive next hop resolves to an operational interface.

Question 628

The datacom engineering team at a library district network after a planned hardware refresh reviews this independent fictional networking case: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. The team applies this remedy: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop. Which observation would directly demonstrate that this specific issue is resolved?

  1. Forwarding entries are present on the line card and a test flow traverses the intended interface
  2. The routing table and packet-path trace select the intended prefix and next hop
  3. Both routers progress to Full adjacency and neighbor timer diagnostics agree
  4. The static route is active and its recursive next hop resolves to an operational interface

Explanation

Correct Answer

D:

The static route is active and its recursive next hop resolves to an operational interface. This is a directly observable check for the proposed correction: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop. The particular failure being investigated is: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active.

Incorrect Answers

A:

Forwarding entries are present on the line card and a test flow traverses the intended interface. That result could validate a repair when newly installed routers accept control sessions but transit packets fail because an upstream line card has not finished installing forwarding entries. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; a static route depending on recursive resolution cannot forward when its next-hop recursion fails.

B:

When a branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router, a result such as this is useful: The routing table and packet-path trace select the intended prefix and next hop. For the reported fault, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; provide a resolvable route to the next hop or replace it with the verified directly reachable next hop.

C:

Two directly connected OSPF routers see each other in packets but never establish a neighbor because their Hello and Dead timers differ. Both routers progress to Full adjacency and neighbor timer diagnostics agree. This observation does not prove the correction for the reported defect: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. Unresolved recursive next hops create a persistent black hole despite syntactically valid configuration.

Question 629

The datacom engineering team at a warehouse automation provider during a topology consistency review reviews this independent fictional networking case: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. The wrong QoS mechanism causes avoidable burst packet loss and user-visible media glitches
  2. Broad early deny rules can remove reachable customer networks with no physical fault
  3. An overbroad mask range can enable unauthorized deaggregation and route leaks
  4. An unchecked PBR next hop can isolate selected users while general connectivity appears normal

Explanation

Correct Answer

B:

Broad early deny rules can remove reachable customer networks with no physical fault. Leaving the exact fault unresolved means: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. The intended response is: Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny.

Incorrect Answers

A:

The wrong QoS mechanism causes avoidable burst packet loss and user-visible media glitches. That consequence could follow when a WAN service sees bursts dropped after an engineer enables policing where buffering and smoothing was the actual service objective. Here, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad; sequential route-policy matches can terminate evaluation and make later rules unreachable.

C:

An overbroad mask range can enable unauthorized deaggregation and route leaks. That consequence could follow when a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Here, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad; reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny.

D:

An unchecked PBR next hop can isolate selected users while general connectivity appears normal. That consequence could follow when policy-based routing forces finance traffic through an unavailable inspection appliance even though the regular route table has a valid path. Here, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad; matched-rule counters and received-route sets show only intended prefixes accepted.

Question 630

The datacom engineering team at a municipal emergency dispatch center during a topology consistency review reviews this independent fictional networking case: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. The team applies this remedy: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes. Which observation would directly demonstrate that this specific issue is resolved?

  1. The backbone receives the intended summary and test routes to each component subnet succeed
  2. The redistributed prefix is present as Type-7 in the NSSA and appropriate external form beyond it
  3. ABRs display correct backbone reachability and previously missing interarea routes appear
  4. The ABR default route appears in the stub area and external destinations remain reachable

Explanation

Correct Answer

A:

The backbone receives the intended summary and test routes to each component subnet succeed. This is a directly observable check for the proposed correction: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes. The particular failure being investigated is: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied.

Incorrect Answers

B:

The redistributed prefix is present as Type-7 in the NSSA and appropriate external form beyond it. That result could validate a repair when an NSSA branch redistributes a local static route that fails to appear as expected outside the NSSA. Here, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied; aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space.

C:

Two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. ABRs display correct backbone reachability and previously missing interarea routes appear. This observation does not prove the correction for the reported defect: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes.

D:

An engineer expects Type-5 external LSAs inside an OSPF stub area and mistakes their absence for a routing fault. The ABR default route appears in the stub area and external destinations remain reachable. This observation does not prove the correction for the reported defect: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. Lack of controlled interarea aggregation increases flooding and update workload during access failures.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests