McAfee Secured

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

100% Huawei H12-821 Guaranteed Success With Testking Training Materials

Get Real H12-821 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 59

Question 580

The datacom engineering team at a local rail transit network while validating change-control evidence reviews this independent fictional networking case: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. An overbroad mask range can enable unauthorized deaggregation and route leaks
  2. Misplaced filters allow an unintended trust-boundary crossing without visible policy errors
  3. Broad early deny rules can remove reachable customer networks with no physical fault
  4. An unchecked PBR next hop can isolate selected users while general connectivity appears normal

Explanation

Correct Answer

A:

An overbroad mask range can enable unauthorized deaggregation and route leaks. Leaving the exact fault unresolved means: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. The intended response is: Constrain ge/le mask-length ranges and test boundary prefix acceptance.

Incorrect Answers

B:

Misplaced filters allow an unintended trust-boundary crossing without visible policy errors. That risk belongs to a separate condition: A security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets. Here, a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes; a prefix-list entry's address and mask-length matching must both reflect the authorization boundary.

C:

Broad early deny rules can remove reachable customer networks with no physical fault. That risk belongs to a separate condition: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Here, a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes; constrain ge/le mask-length ranges and test boundary prefix acceptance.

D:

An unchecked PBR next hop can isolate selected users while general connectivity appears normal. That risk belongs to a separate condition: Policy-based routing forces finance traffic through an unavailable inspection appliance even though the regular route table has a valid path. Here, a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes; tests accept the approved /24 and reject longer unauthorized prefixes. For local rail transit network while validating change-control evidence, the acceptance test should show that tests accept the approved /24 and reject longer unauthorized prefixes.

Question 581

The datacom engineering team at a health laboratory network after a planned hardware refresh reviews this independent fictional networking case: An iBGP peer learns external prefixes but cannot install them because the original eBGP next hop is not reachable internally. A proposed remedy is: Apply next-hop-self on the appropriate border speaker or otherwise make the next hop legitimately reachable. Which technical principle most directly supports this remedy?

  1. Route reflection loop-prevention attributes prevent readvertising a route into a cycle
  2. iBGP commonly preserves next-hop information, so learned routes require resolvable next hops
  3. Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale
  4. MED is a suggestion about preferred entry into a neighboring AS and its comparison is policy dependent

Explanation

Correct Answer

B:

iBGP commonly preserves next-hop information, so learned routes require resolvable next hops. This directly explains why the corrective operation is appropriate: Apply next-hop-self on the appropriate border speaker or otherwise make the next hop legitimately reachable. The observed acceptance evidence should be: The iBGP route becomes eligible and its next hop resolves through the IGP.

Incorrect Answers

A:

Route reflection loop-prevention attributes prevent readvertising a route into a cycle. That rule governs a different situation: An iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. Here, an iBGP peer learns external prefixes but cannot install them because the original eBGP next hop is not reachable internally. iBGP commonly preserves next-hop information, so learned routes require resolvable next hops.

C:

Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale. That rule governs a different situation: A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. Here, an iBGP peer learns external prefixes but cannot install them because the original eBGP next hop is not reachable internally. Apply next-hop-self on the appropriate border speaker or otherwise make the next hop legitimately reachable.

D:

When two routes from the same upstream AS choose an undesired interconnect because MED values are not consistently planned, MED is a suggestion about preferred entry into a neighboring AS and its comparison is policy dependent. By contrast, an iBGP peer learns external prefixes but cannot install them because the original eBGP next hop is not reachable internally; the iBGP route becomes eligible and its next hop resolves through the IGP.

Question 582

The datacom engineering team at a regional health network during a controlled network cutover reviews this independent fictional networking case: A transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2. The team applies this remedy: Set compatible IS-IS circuit levels consistent with the core design. Which observation would directly demonstrate that this specific issue is resolved?

  1. IS-IS hellos and LSP floods succeed and the remote LSDB converges
  2. The intended stable router becomes DIS and the pseudonode LSP refreshes correctly
  3. The peer adjacency is Up at the intended level and corresponding LSPs exchange
  4. Traces avoid the recovering node until readiness and return afterward without loss

Explanation

Correct Answer

C:

The peer adjacency is Up at the intended level and corresponding LSPs exchange. This is a directly observable check for the proposed correction: Set compatible IS-IS circuit levels consistent with the core design. The particular failure being investigated is: A transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2.

Incorrect Answers

A:

IS-IS neighbor connectivity is inconsistent across a transport that filters oversized protocol packets while data pings still pass. IS-IS hellos and LSP floods succeed and the remote LSDB converges. This observation does not prove the correction for the reported defect: A transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2. IS-IS adjacencies require at least one common enabled routing level.

B:

The intended stable router becomes DIS and the pseudonode LSP refreshes correctly. This check belongs to a LAN segment elects an unstable edge router as Designated Intermediate System, producing avoidable pseudonode churn. The actual defect is different: A transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2. Set compatible IS-IS circuit levels consistent with the core design.

D:

A router recovering from reboot begins attracting transit traffic before its route state is ready. Traces avoid the recovering node until readiness and return afterward without loss. This observation does not prove the correction for the reported defect: A transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2. Level mismatches can isolate the core despite both routers advertising IS-IS globally.

Question 583

The datacom engineering team at a call center outsourcer after a planned hardware refresh reviews this independent fictional networking case: One SSID assigns most devices to a single client VLAN while remaining VLAN-pool ranges have unused address space. A proposed remedy is: Review the WLAN VLAN pool mapping and rebalance supported client distribution with consistent DHCP scopes. Which technical principle most directly supports this remedy?

  1. A roaming design should reduce reconnection overhead without bypassing authorized identity checks
  2. A VLAN pool can distribute WLAN clients across logical broadcast domains when pool and DHCP design are coherent
  3. Strong RSSI does not guarantee throughput; overlapping airtime competition reduces usable capacity
  4. WLAN access enforcement must combine authenticated identity with the corresponding least-privilege network role

Explanation

Correct Answer

B:

A VLAN pool can distribute WLAN clients across logical broadcast domains when pool and DHCP design are coherent. This directly explains why the corrective operation is appropriate: Review the WLAN VLAN pool mapping and rebalance supported client distribution with consistent DHCP scopes. The observed acceptance evidence should be: Client associations spread across permitted VLANs and each receives an address from its own correct scope.

Incorrect Answers

A:

When voice handsets suffer several seconds of audio interruption after moving between APs because full authentication runs on every transition, a roaming design should reduce reconnection overhead without bypassing authorized identity checks. By contrast, one SSID assigns most devices to a single client VLAN while remaining VLAN-pool ranges have unused address space; a VLAN pool can distribute WLAN clients across logical broadcast domains when pool and DHCP design are coherent.

C:

A large lecture hall experiences low Wi-Fi throughput even with strong signal because neighboring AP radios overlap excessively on busy channels. Strong RSSI does not guarantee throughput; overlapping airtime competition reduces usable capacity. The current condition differs: One SSID assigns most devices to a single client VLAN while remaining VLAN-pool ranges have unused address space. Review the WLAN VLAN pool mapping and rebalance supported client distribution with consistent DHCP scopes.

D:

WLAN access enforcement must combine authenticated identity with the corresponding least-privilege network role. That rule governs a different situation: Guest devices receive an internal employee VLAN after 802.1X authorization results are mapped incorrectly by WLAN policy. Here, one SSID assigns most devices to a single client VLAN while remaining VLAN-pool ranges have unused address space. Client associations spread across permitted VLANs and each receives an address from its own correct scope.

Question 584

The datacom engineering team at a cloud hosting provider after an incident review reviews this independent fictional networking case: A high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling. The team applies this remedy: Tune BFD intervals and multiplier for supported device and transport capabilities. Which observation would directly demonstrate that this specific issue is resolved?

  1. BFD remains stable under expected CPU load and still detects real test failures within requirement
  2. During a planned circuit interruption, BFD detects failure and routing reconverges within the operational target
  3. The planned primary device owns the virtual gateway after recovery and failover still works
  4. An injected upstream failure withdraws the primary route and backup traffic succeeds

Explanation

Correct Answer

A:

BFD remains stable under expected CPU load and still detects real test failures within requirement. This is a directly observable check for the proposed correction: Tune BFD intervals and multiplier for supported device and transport capabilities. The particular failure being investigated is: A high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling.

Incorrect Answers

B:

During a planned circuit interruption, BFD detects failure and routing reconverges within the operational target. That result could validate a repair when OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. Here, a high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling; failure detection speed must be balanced against scheduling jitter and false-positive risk.

C:

When a backup gateway becomes VRRP Master after an unrelated restart despite the primary router being healthy, a result such as this is useful: The planned primary device owns the virtual gateway after recovery and failover still works. For the reported fault, a high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling; tune BFD intervals and multiplier for supported device and transport capabilities.

D:

A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. An injected upstream failure withdraws the primary route and backup traffic succeeds. This observation does not prove the correction for the reported defect: A high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling. Oversensitive BFD can cause route flapping on healthy circuits.

Question 585

The datacom engineering team at an automotive parts manufacturer as part of an acceptance test reviews this independent fictional networking case: After an uplink upgrade, OSPF still prefers a slower backup circuit because interface reference bandwidth and explicit cost settings were not reviewed. Which corrective engineering action most directly addresses this problem?

  1. Reconcile the actual link MTU and OSPF database exchange compatibility before retransmitting LSAs
  2. Recalculate and set appropriate OSPF costs for the changed link while documenting routing intent
  3. Evaluate E1 versus E2 external metric behavior and configure the intended metric type consistently
  4. Align the totally stub area behavior at the ABR and verify the intended default-based forwarding

Explanation

Correct Answer

B:

Recalculate and set appropriate OSPF costs for the changed link while documenting routing intent. This is the specific action that addresses the fictional fault: After an uplink upgrade, OSPF still prefers a slower backup circuit because interface reference bandwidth and explicit cost settings were not reviewed. The governing technical reason is: OSPF shortest-path selection uses cumulative interface cost, not real-time measured bandwidth by itself. Verify by checking: SPF routing to the remote prefix favors the intended link and converges after the change.

Incorrect Answers

A:

OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. This is where reconciling the actual link MTU and OSPF database exchange compatibility before retransmitting LSAs would help. By contrast, after an uplink upgrade, OSPF still prefers a slower backup circuit because interface reference bandwidth and explicit cost settings were not reviewed. OSPF shortest-path selection uses cumulative interface cost, not real-time measured bandwidth by itself.

C:

A remote site incorrectly chooses an external OSPF route that ignores material internal distance to competing exit points. Evaluating E1 versus E2 external metric behavior and configuring the intended metric type consistently can respond to that condition, but it would not correct the reported fault: After an uplink upgrade, OSPF still prefers a slower backup circuit because interface reference bandwidth and explicit cost settings were not reviewed. Recalculate and set appropriate OSPF costs for the changed link while documenting routing intent.

D:

When branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR, aligning the totally stub area behavior at the ABR and verifying the intended default-based forwarding could be appropriate. Here, after an uplink upgrade, OSPF still prefers a slower backup circuit because interface reference bandwidth and explicit cost settings were not reviewed. SPF routing to the remote prefix favors the intended link and converges after the change.

Question 586

The datacom engineering team at a payment-processing provider after a monitored link change reviews this independent fictional networking case: Two replacement servers are configured with the same IPv6 address and one fails to bring the address online. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Duplicate IPv6 addresses create intermittent black holes and service identity confusion
  2. Broken RA configuration leaves clients with only link-local reachability
  3. Ambiguous link-local next hops can make IPv6 forwarding fail despite apparently valid prefixes
  4. A fragmented OSPF backbone can split route exchange between otherwise healthy areas

Explanation

Correct Answer

A:

Duplicate IPv6 addresses create intermittent black holes and service identity confusion. Leaving the exact fault unresolved means: Two replacement servers are configured with the same IPv6 address and one fails to bring the address online. The intended response is: Resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior.

Incorrect Answers

B:

Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. In that situation, broken RA configuration leaves clients with only link-local reachability. Here instead, two replacement servers are configured with the same IPv6 address and one fails to bring the address online. IPv6 DAD uses neighbor solicitation to detect duplicate addresses before regular use.

C:

Ambiguous link-local next hops can make IPv6 forwarding fail despite apparently valid prefixes. That consequence could follow when an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. Here, two replacement servers are configured with the same IPv6 address and one fails to bring the address online; resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior.

D:

Two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. In that situation, a fragmented OSPF backbone can split route exchange between otherwise healthy areas. Here instead, two replacement servers are configured with the same IPv6 address and one fails to bring the address online. The conflicting address is removed and DAD completes without duplicate notifications.

Question 587

The datacom engineering team at a local rail transit network while validating change-control evidence reviews this independent fictional networking case: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Which corrective engineering action most directly addresses this problem?

  1. Place the filter on the correct ingress or egress direction based on the observed packet path
  2. Define QoS trust boundaries and explicitly preserve authorized DSCP mappings across the interconnect
  3. Tag redistributed routes and deny re-entry of the marked route class at the opposite redistribution point
  4. Constrain ge/le mask-length ranges and test boundary prefix acceptance

Explanation

Correct Answer

D:

Constrain ge/le mask-length ranges and test boundary prefix acceptance. This is the specific action that addresses the fictional fault: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. The governing technical reason is: A prefix-list entry's address and mask-length matching must both reflect the authorization boundary. Verify by checking: Tests accept the approved /24 and reject longer unauthorized prefixes.

Incorrect Answers

A:

When a security ACL intended to block guest-to-management traffic is applied outbound on the wrong interface and never matches those packets, placing the filter on the correct ingress or egress direction based on the observed packet path could be appropriate. Here, a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. A prefix-list entry's address and mask-length matching must both reflect the authorization boundary.

B:

When delay-sensitive packets leave the campus with voice markings but are remarked to best-effort at a trusted border, defining QoS trust boundaries and explicitly preserve authorized DSCP mappings across the interconnect could be appropriate. Here, a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Constrain ge/le mask-length ranges and test boundary prefix acceptance.

C:

Two redistribution points repeatedly re-inject learned routes between OSPF and another IGP and churn route entries. This is where tagging redistributed routes and deny re-entry of the marked route class at the opposite redistribution point would help. By contrast, a routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Tests accept the approved /24 and reject longer unauthorized prefixes.

Question 588

The datacom engineering team at a call center outsourcer after a planned hardware refresh reviews this independent fictional networking case: An iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. Which corrective engineering action most directly addresses this problem?

  1. Apply provider-approved AS_PATH prepending or another suitable inbound policy while recognizing remote policy precedence
  2. Audit reflector topology and preserve the standard ORIGINATOR_ID and CLUSTER_LIST loop controls
  3. Set an appropriate maximum-prefix threshold and test the negotiated recovery behavior
  4. Assign route distinguishers suitable for creating unique originating VPN route identifiers

Explanation

Correct Answer

B:

Audit reflector topology and preserve the standard ORIGINATOR_ID and CLUSTER_LIST loop controls. This is the specific action that addresses the fictional fault: An iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. The governing technical reason is: Route reflection loop-prevention attributes prevent readvertising a route into a cycle. Verify by checking: Captures and received-route diagnostics show the cyclic update rejected without route churn.

Incorrect Answers

A:

Applying provider-approved AS_PATH prepending or another suitable inbound policy while recognizing remote policy precedence is relevant when an enterprise wants to influence how some external networks enter its secondary ISP, but it changes local preference inside its own AS instead. It does not resolve this case: An iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. Route reflection loop-prevention attributes prevent readvertising a route into a cycle.

C:

When a provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set, setting an appropriate maximum-prefix threshold and testing the negotiated recovery behavior could be appropriate. Here, an iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. Audit reflector topology and preserve the standard ORIGINATOR_ID and CLUSTER_LIST loop controls.

D:

Two EVPN leaf devices originate indistinguishable VPN NLRI because the service route identifiers were copied incorrectly. This is where assigning route distinguishers suitable for creating unique originating VPN route identifiers would help. By contrast, an iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. Captures and received-route diagnostics show the cyclic update rejected without route churn.

Question 589

The datacom engineering team at a satellite ground station operator after an incident review reviews this independent fictional networking case: An IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Duplicate IPv6 addresses create intermittent black holes and service identity confusion
  2. Broken RA configuration leaves clients with only link-local reachability
  3. Ambiguous link-local next hops can make IPv6 forwarding fail despite apparently valid prefixes
  4. Misclassified real-time traffic may be dropped despite an apparently configured priority queue

Explanation

Correct Answer

C:

Ambiguous link-local next hops can make IPv6 forwarding fail despite apparently valid prefixes. Leaving the exact fault unresolved means: An IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. The intended response is: Specify the appropriate egress interface with the link-local next hop and verify neighbor discovery.

Incorrect Answers

A:

Two replacement servers are configured with the same IPv6 address and one fails to bring the address online. In that situation, duplicate IPv6 addresses create intermittent black holes and service identity confusion. Here instead, an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly. IPv6 link-local addresses are interface scoped and may require egress context for next-hop resolution.

B:

Broken RA configuration leaves clients with only link-local reachability. That risk belongs to a separate condition: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Here, an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly; specify the appropriate egress interface with the link-local next hop and verify neighbor discovery.

D:

Misclassified real-time traffic may be dropped despite an apparently configured priority queue. That consequence could follow when a voice QoS class remains at zero matches because the classifier checks a DSCP value that the access edge never assigns. Here, an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly; the route installs with the expected interface and reachability probes succeed.

Question 590

The datacom engineering team at an agricultural equipment distributor after an incident review reviews this independent fictional networking case: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. A proposed remedy is: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop. Which technical principle most directly supports this remedy?

  1. A healthy control plane does not prove that hardware forwarding entries are programmed in the data plane
  2. A static route depending on recursive resolution cannot forward when its next-hop recursion fails
  3. Longest-prefix matching precedes route preference comparisons between routes of different mask lengths
  4. IGMP membership state is maintained by router queries and host reports rather than permanent discovery

Explanation

Correct Answer

B:

A static route depending on recursive resolution cannot forward when its next-hop recursion fails. This directly explains why the corrective operation is appropriate: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop. The observed acceptance evidence should be: The static route is active and its recursive next hop resolves to an operational interface.

Incorrect Answers

A:

A healthy control plane does not prove that hardware forwarding entries are programmed in the data plane. That principle is relevant when newly installed routers accept control sessions but transit packets fail because an upstream line card has not finished installing forwarding entries. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; a static route depending on recursive resolution cannot forward when its next-hop recursion fails.

C:

When a branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router, longest-prefix matching precedes route preference comparisons between routes of different mask lengths. By contrast, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; provide a resolvable route to the next hop or replace it with the verified directly reachable next hop.

D:

An access VLAN loses a multicast receiver after a quiet period because periodic IGMP membership updates never reach the upstream querier. IGMP membership state is maintained by router queries and host reports rather than permanent discovery. The current condition differs: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. The static route is active and its recursive next hop resolves to an operational interface.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests