McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 45

Question 440

To avoid replacing the wrong part, a technician reviews the issue: A USB peripheral can run at SuperSpeed on one port but only at USB 2.0 rates on an old hub between it and the PC. Which verification is the most discriminating?

  1. The endpoints expose different digital video interfaces and conversion direction matters
  2. The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities
  3. The optics specify single-mode wavelength and use a small-core single-mode cable
  4. The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction

Explanation

Correct Answer

B:

The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.

Incorrect Answers

A:

The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.

C:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

D:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

Question 441

A technician has a tentative diagnosis for this incident: A field network cable is buried directly between outdoor enclosures, but ordinary indoor cable has absorbed moisture and failed. Which test result would support it most directly?

  1. The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction
  2. The endpoints expose different digital video interfaces and conversion direction matters
  3. The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities
  4. The optics specify single-mode wavelength and use a small-core single-mode cable

Explanation

Correct Answer

A:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

Incorrect Answers

B:

The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.

C:

The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.

D:

The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.

Question 442

A technician connects a four-position telephone line to an eight-position Ethernet jack and assumes the connectors are interchangeable. Which evidence distinguishes the likely cause from other issues in the same technical area?

  1. The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs
  2. The telephone plug is narrower and uses fewer positions than the structured Ethernet connector
  3. The installation path is an air-handling plenum and the cable jacket is rated for that occupancy
  4. The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction

Explanation

Correct Answer

B:

The telephone plug is narrower and uses fewer positions than the structured Ethernet connector, consistent with a rj11 telephone and rj45 ethernet connector difference.

Incorrect Answers

A:

The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector.

C:

The installation path is an air-handling plenum and the cable jacket is rated for that occupancy, consistent with a plenum-rated network cabling.

D:

The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.

Question 443

Before repairing this fault, the service desk wants reproducible evidence: A small laptop accepts a compact memory card that does not physically fit a full desktop motherboard's slot. Which finding is most relevant?

  1. The service manual's supported module density and total capacity are below the installed specification
  2. The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4
  3. The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots
  4. The service manual diagrams onboard memory chips and a single removable socket

Explanation

Correct Answer

C:

The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots, consistent with a sodimm versus full-size dimm form factors.

Incorrect Answers

A:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

B:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

D:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

Question 444

After receiving the ticket, a senior technician asks: A desktop is built for DDR5, but a technician tries to use a spare DDR4 module of the same nominal capacity. Which observation provides the best confirmation?

  1. Firmware reports the lower negotiated memory rate despite a higher-rated module installed
  2. The motherboard diagram shows the recommended paired slots on separate memory channels
  3. The CPU, motherboard and firmware compatibility documents do not confirm ECC operation
  4. The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4

Explanation

Correct Answer

D:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

Incorrect Answers

A:

Firmware reports the lower negotiated memory rate despite a higher-rated module installed, consistent with a memory clock limited by platform and shared settings.

B:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

C:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

Question 445

A workstation running critical calculations needs detection and correction of many single-bit memory errors, but the proposed board cannot use ECC memory. Which additional observation would most strongly corroborate the suspected cause?

  1. The service manual's supported module density and total capacity are below the installed specification
  2. The motherboard diagram shows the recommended paired slots on separate memory channels
  3. The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4
  4. The CPU, motherboard and firmware compatibility documents do not confirm ECC operation

Explanation

Correct Answer

D:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

Incorrect Answers

A:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

B:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

C:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

Question 446

To avoid replacing the wrong part, a technician reviews the issue: A desktop contains two matching memory modules but both are fitted in slots reserved for a single channel on its board. Which verification is the most discriminating?

  1. The service manual's supported module density and total capacity are below the installed specification
  2. The motherboard diagram shows the recommended paired slots on separate memory channels
  3. The CPU, motherboard and firmware compatibility documents do not confirm ECC operation
  4. The service manual diagrams onboard memory chips and a single removable socket

Explanation

Correct Answer

B:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

Incorrect Answers

A:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

C:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

D:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

Question 447

A technician has a tentative diagnosis for this incident: An office PC with an old chipset does not recognize the full capacity of two high-density DIMMs despite both fitting physically. Which test result would support it most directly?

  1. The service manual's supported module density and total capacity are below the installed specification
  2. The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots
  3. The motherboard diagram shows the recommended paired slots on separate memory channels
  4. Firmware reports the lower negotiated memory rate despite a higher-rated module installed

Explanation

Correct Answer

A:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

Incorrect Answers

B:

The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots, consistent with a sodimm versus full-size dimm form factors.

C:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

D:

Firmware reports the lower negotiated memory rate despite a higher-rated module installed, consistent with a memory clock limited by platform and shared settings.

Question 448

A laptop has one replaceable SODIMM but the remaining memory is permanently soldered to the motherboard. Which evidence distinguishes the likely cause from other issues in the same technical area?

  1. The CPU, motherboard and firmware compatibility documents do not confirm ECC operation
  2. The service manual diagrams onboard memory chips and a single removable socket
  3. The motherboard diagram shows the recommended paired slots on separate memory channels
  4. The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots

Explanation

Correct Answer

B:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

Incorrect Answers

A:

The CPU, motherboard and firmware compatibility documents do not confirm ECC operation, consistent with an ecc memory requires supported platform hardware.

C:

The motherboard diagram shows the recommended paired slots on separate memory channels, consistent with a dual-channel memory population rules.

D:

The service manual lists SO-DIMM modules while the desktop uses standard DIMM slots, consistent with a sodimm versus full-size dimm form factors.

Question 449

Before repairing this fault, the service desk wants reproducible evidence: A system supports a lower DDR data rate than a high-speed module's advertised profile and runs the module at a slower standard frequency. Which finding is most relevant?

  1. The service manual's supported module density and total capacity are below the installed specification
  2. The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4
  3. Firmware reports the lower negotiated memory rate despite a higher-rated module installed
  4. The service manual diagrams onboard memory chips and a single removable socket

Explanation

Correct Answer

C:

Firmware reports the lower negotiated memory rate despite a higher-rated module installed, consistent with a memory clock limited by platform and shared settings.

Incorrect Answers

A:

The service manual's supported module density and total capacity are below the installed specification, consistent with a maximum supported memory capacity or density limitation.

B:

The motherboard supports DDR5 pinout and electrical requirements while the spare is DDR4, consistent with an incompatible ddr memory generation.

D:

The service manual diagrams onboard memory chips and a single removable socket, consistent with a soldered-onboard ram limits user upgrade options.

Question 450

After receiving the ticket, a senior technician asks: A new workstation needs high random I/O and has an available PCIe-connected M.2 socket; the old SATA SSD saturates the SATA link. Which observation provides the best confirmation?

  1. Both drives use magnetic platters but the faster model rotates at 7200 RPM
  2. The drive connector and controller specifications show SAS disks unsupported by the SATA-only host
  3. Benchmarking shows the existing drive capped near SATA throughput while the board supports NVMe
  4. The device manual specifies SATA-based M.2 storage while the replacement requires PCIe NVMe

Explanation

Correct Answer

C:

Benchmarking shows the existing drive capped near SATA throughput while the board supports NVMe, consistent with a nvme ssd over pcie for high-throughput storage.

Incorrect Answers

A:

Both drives use magnetic platters but the faster model rotates at 7200 RPM, consistent with a hdd spindle speed influences rotational latency.

B:

The drive connector and controller specifications show SAS disks unsupported by the SATA-only host, consistent with a sas drive requires compatible controller interface.

D:

The device manual specifies SATA-based M.2 storage while the replacement requires PCIe NVMe, consistent with a m.2 physical form factor is not the storage protocol.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests