Question 430 A technician has a tentative diagnosis for this incident: A workstation monitor feels smooth at 60 Hz but moving text tears during high-frame-rate applications because display timing is mismatched. Which test result would support it most directly? Dark test patterns reveal illumination from the panel backlight despite black picture values The GPU output frame rate is not synchronized with the display's active refresh mode The higher-resolution panel contains more addressable pixels across the same diagonal dimension Touch coordinates are offset while video output and external pointer positioning remain accurate Explanation Correct Answer B:The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch. Incorrect Answers A:Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels. C:The higher-resolution panel contains more addressable pixels across the same diagonal dimension, consistent with a higher pixel density at fixed screen size. D:Touch coordinates are offset while video output and external pointer positioning remain accurate, consistent with a touch digitizer calibration or sensor fault.
Question 431 Before repairing this fault, the service desk wants reproducible evidence: A photo editor wants a backlit LCD with good contrast for dark scenes but is willing to accept narrower off-axis consistency than IPS. Which finding is most relevant? Dark test patterns reveal illumination from the panel backlight despite black picture values The display uses many small independently controlled backlight zones behind an LCD layer The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast The GPU output frame rate is not synchronized with the display's active refresh mode Explanation Correct Answer C:The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast, consistent with a va lcd alignment emphasizes contrast. Incorrect Answers A:Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels. B:The display uses many small independently controlled backlight zones behind an LCD layer, consistent with a mini-led local dimming backlight. D:The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.
Question 432 After receiving the ticket, a senior technician asks: A conference room needs an LCD whose backlight can dim small areas for high dynamic range rather than one uniform brightness plane. Which observation provides the best confirmation? The display uses many small independently controlled backlight zones behind an LCD layer The higher-resolution panel contains more addressable pixels across the same diagonal dimension The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast Dark test patterns reveal illumination from the panel backlight despite black picture values Explanation Correct Answer A:The display uses many small independently controlled backlight zones behind an LCD layer, consistent with a mini-led local dimming backlight. Incorrect Answers B:The higher-resolution panel contains more addressable pixels across the same diagonal dimension, consistent with a higher pixel density at fixed screen size. C:The panel specification identifies vertical-alignment liquid crystals with strong native black-level contrast, consistent with a va lcd alignment emphasizes contrast. D:Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels.
Question 433 A designer compares two screens of equal physical size and notices one makes fine text sharper because it has more pixels per inch. Which additional observation would most strongly corroborate the suspected cause? Dark test patterns reveal illumination from the panel backlight despite black picture values The display uses many small independently controlled backlight zones behind an LCD layer The higher-resolution panel contains more addressable pixels across the same diagonal dimension The GPU output frame rate is not synchronized with the display's active refresh mode Explanation Correct Answer C:The higher-resolution panel contains more addressable pixels across the same diagonal dimension, consistent with a higher pixel density at fixed screen size. Incorrect Answers A:Dark test patterns reveal illumination from the panel backlight despite black picture values, consistent with a backlit lcd cannot turn off individual pixels. B:The display uses many small independently controlled backlight zones behind an LCD layer, consistent with a mini-led local dimming backlight. D:The GPU output frame rate is not synchronized with the display's active refresh mode, consistent with a refresh-rate and synchronization mismatch.
Question 434 To avoid replacing the wrong part, a technician reviews the issue: A building crew must route Ethernet above a drop ceiling used to circulate environmental air, where fire code requires low-smoke cable jackets. Which verification is the most discriminating? The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction The optics specify single-mode wavelength and use a small-core single-mode cable The installation path is an air-handling plenum and the cable jacket is rated for that occupancy Signal errors correlate with motor operation and the proposed cable has foil or braid shielding Explanation Correct Answer C:The installation path is an air-handling plenum and the cable jacket is rated for that occupancy, consistent with a plenum-rated network cabling. Incorrect Answers A:The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable. B:The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link. D:Signal errors correlate with motor operation and the proposed cable has foil or braid shielding, consistent with a shielded twisted-pair cable for an emi-prone route.
Question 435 A technician has a tentative diagnosis for this incident: A network run shares a cable tray with motors and experiences induced electrical noise on unshielded twisted pairs. Which test result would support it most directly? Signal errors correlate with motor operation and the proposed cable has foil or braid shielding The installation path is an air-handling plenum and the cable jacket is rated for that occupancy The optics specify single-mode wavelength and use a small-core single-mode cable The endpoints expose different digital video interfaces and conversion direction matters Explanation Correct Answer A:Signal errors correlate with motor operation and the proposed cable has foil or braid shielding, consistent with a shielded twisted-pair cable for an emi-prone route. Incorrect Answers B:The installation path is an air-handling plenum and the cable jacket is rated for that occupancy, consistent with a plenum-rated network cabling. C:The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link. D:The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility.
Question 436 A campus needs a long fiber run between distant buildings with optics rated for a narrow-core light path. Which evidence distinguishes the likely cause from other issues in the same technical area? The optics specify single-mode wavelength and use a small-core single-mode cable Signal errors correlate with motor operation and the proposed cable has foil or braid shielding The modules specify multimode short-reach optics and matching fiber type The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities Explanation Correct Answer A:The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link. Incorrect Answers B:Signal errors correlate with motor operation and the proposed cable has foil or braid shielding, consistent with a shielded twisted-pair cable for an emi-prone route. C:The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link. D:The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop.
Question 437 Before repairing this fault, the service desk wants reproducible evidence: A short datacenter optical link is specified with multimode SR transceivers and cost-effective larger-core fiber. Which finding is most relevant? The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs The optics specify single-mode wavelength and use a small-core single-mode cable The modules specify multimode short-reach optics and matching fiber type Explanation Correct Answer D:The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link. Incorrect Answers A:The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop. B:The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector. C:The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link.
Question 438 After receiving the ticket, a senior technician asks: A technician must attach a modern high-density fiber patch cord to LC ports on a switch rather than older larger SC sockets. Which observation provides the best confirmation? The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs The optics specify single-mode wavelength and use a small-core single-mode cable The modules specify multimode short-reach optics and matching fiber type The telephone plug is narrower and uses fewer positions than the structured Ethernet connector Explanation Correct Answer A:The switch transceiver has two small LC receptacles and the patch lead currently ends in SC plugs, consistent with a lc small-form-factor optical connector. Incorrect Answers B:The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link. C:The modules specify multimode short-reach optics and matching fiber type, consistent with a multimode fiber for a short optical link. D:The telephone plug is narrower and uses fewer positions than the structured Ethernet connector, consistent with a rj11 telephone and rj45 ethernet connector difference.
Question 439 A user has a digital monitor with DisplayPort and a workstation with only HDMI; a VGA cable is available but loses the required digital signal characteristics. Which additional observation would most strongly corroborate the suspected cause? The passive adapter supports DP source to HDMI display, not an HDMI source to DP monitor The endpoints expose different digital video interfaces and conversion direction matters A known-good DP signal reaches the display but the monitor is configured to listen to a different port The link works at lower resolution but loses signal when switched to the highest output rate Explanation Correct Answer B:The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility. Incorrect Answers A:The passive adapter supports DP source to HDMI display, not an HDMI source to DP monitor, consistent with a passive displayport++ adapter used in the wrong direction. C:A known-good DP signal reaches the display but the monitor is configured to listen to a different port, consistent with a monitor input-source mismatch. D:The link works at lower resolution but loses signal when switched to the highest output rate, consistent with an insufficient video bandwidth for selected resolution.
Question 440 To avoid replacing the wrong part, a technician reviews the issue: A USB peripheral can run at SuperSpeed on one port but only at USB 2.0 rates on an old hub between it and the PC. Which verification is the most discriminating? The endpoints expose different digital video interfaces and conversion direction matters The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities The optics specify single-mode wavelength and use a small-core single-mode cable The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction Explanation Correct Answer B:The device and host support USB 3.x but the intermediate hub reports USB 2.0 capabilities, consistent with a usb link negotiated at the lowest supported hop. Incorrect Answers A:The endpoints expose different digital video interfaces and conversion direction matters, consistent with a digital hdmi-to-displayport conversion compatibility. C:The optics specify single-mode wavelength and use a small-core single-mode cable, consistent with a single-mode fiber for a long-distance link. D:The cable route lies underground and the selected cable jacket lacks water-blocking direct-burial construction, consistent with an outdoor direct-burial-rated copper cable.