Question 390 A help-desk ticket states: A workstation uses a 5400 RPM mechanical disk and a user complains about slow seeks compared with a supported 7200 RPM disk. Which diagnosis is best supported rather than simply possible? RAID 1 mirrored disks NVMe SSD over PCIe for high-throughput storage RAID 0 provides no disk fault tolerance HDD spindle speed influences rotational latency Explanation Correct Answer D:Both drives use magnetic platters but the faster model rotates at 7200 RPM, consistent with a hdd spindle speed influences rotational latency. Incorrect Answers A:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks. B:Benchmarking shows the existing drive capped near SATA throughput while the board supports NVMe, consistent with a nvme ssd over pcie for high-throughput storage. C:The array stripes data across disks without mirrored or parity redundancy, consistent with a raid 0 provides no disk fault tolerance.
Question 391 When comparing several hypotheses, a technician observes: Two disks are striped for speed, and the loss of one member makes the entire volume unavailable. Which condition best fits? RAID 1 mirrored disks RAID 5 single-parity tolerance RAID 6 dual-parity design RAID 0 provides no disk fault tolerance Explanation Correct Answer D:The array stripes data across disks without mirrored or parity redundancy, consistent with a raid 0 provides no disk fault tolerance. Incorrect Answers A:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks. B:The array can operate degraded after one disk failure but cannot tolerate a second concurrent member loss, consistent with a raid 5 single-parity tolerance. C:The storage specification requires tolerance of any two failed members in the parity set, consistent with a raid 6 dual-parity design.
Question 392 A technician investigates this device problem: A two-drive workstation must keep identical copies of data on both drives and tolerate one drive failure. Which diagnosis best explains the observed pattern? RAID 5 single-parity tolerance RAID 6 dual-parity design RAID 1 mirrored disks RAID 0 provides no disk fault tolerance Explanation Correct Answer C:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks. Incorrect Answers A:The array can operate degraded after one disk failure but cannot tolerate a second concurrent member loss, consistent with a raid 5 single-parity tolerance. B:The storage specification requires tolerance of any two failed members in the parity set, consistent with a raid 6 dual-parity design. D:The array stripes data across disks without mirrored or parity redundancy, consistent with a raid 0 provides no disk fault tolerance.
Question 393 A storage box has four equal drives in a RAID 5 array and one disk fails; reads continue but another failure during rebuild threatens data. Which underlying component or configuration issue is most consistent with the evidence? RAID 6 dual-parity design RAID 5 single-parity tolerance RAID 0 provides no disk fault tolerance RAID 1 mirrored disks Explanation Correct Answer B:The array can operate degraded after one disk failure but cannot tolerate a second concurrent member loss, consistent with a raid 5 single-parity tolerance. Incorrect Answers A:The storage specification requires tolerance of any two failed members in the parity set, consistent with a raid 6 dual-parity design. C:The array stripes data across disks without mirrored or parity redundancy, consistent with a raid 0 provides no disk fault tolerance. D:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks.
Question 394 During a support incident, An archival server needs a parity array that can survive two simultaneous disk failures without a mirrored copy of every drive. What is the most likely technical explanation? RAID 1 mirrored disks RAID 10 striped mirrors RAID 5 single-parity tolerance RAID 6 dual-parity design Explanation Correct Answer D:The storage specification requires tolerance of any two failed members in the parity set, consistent with a raid 6 dual-parity design. Incorrect Answers A:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks. B:The storage layout combines mirrors with striping across pairs rather than simple parity, consistent with a raid 10 striped mirrors. C:The array can operate degraded after one disk failure but cannot tolerate a second concurrent member loss, consistent with a raid 5 single-parity tolerance.
Question 395 A database server requires both mirrored redundancy and performance from a stripe built over multiple mirrored pairs. Which failure mode should the technician prioritize? RAID 1 mirrored disks RAID 10 striped mirrors RAID 6 dual-parity design SAS drive requires compatible controller interface Explanation Correct Answer B:The storage layout combines mirrors with striping across pairs rather than simple parity, consistent with a raid 10 striped mirrors. Incorrect Answers A:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks. C:The storage specification requires tolerance of any two failed members in the parity set, consistent with a raid 6 dual-parity design. D:The drive connector and controller specifications show SAS disks unsupported by the SATA-only host, consistent with a sas drive requires compatible controller interface.
Question 396 A help-desk ticket states: A business storage backplane uses enterprise SAS disks, while an off-the-shelf SATA-only controller cannot communicate with them. Which diagnosis is best supported rather than simply possible? SAS drive requires compatible controller interface RAID 10 striped mirrors RAID 1 mirrored disks M.2 physical form factor is not the storage protocol Explanation Correct Answer A:The drive connector and controller specifications show SAS disks unsupported by the SATA-only host, consistent with a sas drive requires compatible controller interface. Incorrect Answers B:The storage layout combines mirrors with striping across pairs rather than simple parity, consistent with a raid 10 striped mirrors. C:The configuration writes the same blocks to both drives and can run degraded with one member, consistent with a raid 1 mirrored disks. D:The device manual specifies SATA-based M.2 storage while the replacement requires PCIe NVMe, consistent with a m.2 physical form factor is not the storage protocol.
Question 397 When comparing several hypotheses, a technician observes: A compact mini-tower chassis accepts only mini-ITX boards, but a technician orders a full-sized ATX motherboard. Which condition best fits? CPU socket and platform incompatibility Motherboard internal header connection mismatch Motherboard form-factor mismatch TPM-bound key protection after motherboard swap Explanation Correct Answer C:The chassis standoff and I/O layout fit mini-ITX and not the dimensions of full ATX, consistent with a motherboard form-factor mismatch. Incorrect Answers A:The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility. B:The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch. D:The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.
Question 398 A technician investigates this device problem: A desktop motherboard supports an Intel socket but the purchaser selects an AMD CPU with a different socket package. Which diagnosis best explains the observed pattern? UEFI Secure Boot rejects untrusted bootloader CPU socket and platform incompatibility TPM-bound key protection after motherboard swap Motherboard form-factor mismatch Explanation Correct Answer B:The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility. Incorrect Answers A:Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader. C:The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap. D:The chassis standoff and I/O layout fit mini-ITX and not the dimensions of full ATX, consistent with a motherboard form-factor mismatch.
Question 399 A laptop is configured to boot only signed loaders, but a replacement system image uses an unsigned bootloader and refuses to start. Which underlying component or configuration issue is most consistent with the evidence? UEFI Secure Boot rejects untrusted bootloader TPM-bound key protection after motherboard swap Incorrect firmware boot-device priority CPU socket and platform incompatibility Explanation Correct Answer A:Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader. Incorrect Answers B:The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap. C:The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority. D:The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility.
Question 400 During a support incident, A company's encryption key protector is intended to bind secrets to platform health, but a motherboard replacement leaves the TPM identity changed. What is the most likely technical explanation? CPU socket and platform incompatibility TPM-bound key protection after motherboard swap Motherboard internal header connection mismatch UEFI Secure Boot rejects untrusted bootloader Explanation Correct Answer B:The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap. Incorrect Answers A:The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility. C:The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch. D:Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.