McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 41

Question 400

During a support incident, A company's encryption key protector is intended to bind secrets to platform health, but a motherboard replacement leaves the TPM identity changed. What is the most likely technical explanation?

  1. CPU socket and platform incompatibility
  2. TPM-bound key protection after motherboard swap
  3. Motherboard internal header connection mismatch
  4. UEFI Secure Boot rejects untrusted bootloader

Explanation

Correct Answer

B:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

Incorrect Answers

A:

The motherboard's CPU support list excludes the chosen processor and the physical socket differs, consistent with a cpu socket and platform incompatibility.

C:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

D:

Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.

Question 401

An add-in graphics card needs full-length high-bandwidth expansion, but a small PCIe x1 slot is the only free slot. Which failure mode should the technician prioritize?

  1. TPM-bound key protection after motherboard swap
  2. Motherboard internal header connection mismatch
  3. Missing GPU auxiliary PCIe power connection
  4. PCIe x16 slot requirement for common graphics cards

Explanation

Correct Answer

D:

The card has an x16 edge connector and a specified lane and chassis-space requirement, consistent with a pcie x16 slot requirement for common graphics cards.

Incorrect Answers

A:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

B:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

C:

The GPU documentation requires a specific PCIe power plug and the connector is not attached, consistent with a missing gpu auxiliary pcie power connection.

Question 402

A help-desk ticket states: A desktop's front USB-C receptacle is present but never works because the motherboard cable is connected to the wrong internal header. Which diagnosis is best supported rather than simply possible?

  1. TPM-bound key protection after motherboard swap
  2. Motherboard internal header connection mismatch
  3. Motherboard form-factor mismatch
  4. Incorrect firmware boot-device priority

Explanation

Correct Answer

B:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

Incorrect Answers

A:

The recovery prompt appears after TPM identity changes even though the encrypted disk is intact, consistent with a tpm-bound key protection after motherboard swap.

C:

The chassis standoff and I/O layout fit mini-ITX and not the dimensions of full ATX, consistent with a motherboard form-factor mismatch.

D:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

Question 403

When comparing several hypotheses, a technician observes: A PC can see a SATA drive but always boots from a disconnected USB flash drive entry before the internal OS disk. Which condition best fits?

  1. Incorrect firmware boot-device priority
  2. UEFI Secure Boot rejects untrusted bootloader
  3. Motherboard internal header connection mismatch
  4. CPU virtualization extension disabled in firmware

Explanation

Correct Answer

A:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

Incorrect Answers

B:

Firmware logs indicate a secure-boot signature or policy validation failure, consistent with an uefi secure boot rejects untrusted bootloader.

C:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

D:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

Question 404

A technician investigates this device problem: A virtual machine tool reports hardware acceleration unavailable on an x64 CPU known to support virtualization. Which diagnosis best explains the observed pattern?

  1. CPU virtualization extension disabled in firmware
  2. Insufficient thermal interface between CPU and heatsink
  3. CPU cooling fan plugged into incorrect header
  4. Incorrect firmware boot-device priority

Explanation

Correct Answer

A:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

Incorrect Answers

B:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

C:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

D:

The UEFI boot list places a removable device above the valid internal boot manager, consistent with an incorrect firmware boot-device priority.

Question 405

A PC's CPU heatsink was reinstalled without renewing dried thermal compound and reaches abnormal temperatures under load. Which underlying component or configuration issue is most consistent with the evidence?

  1. Insufficient thermal interface between CPU and heatsink
  2. CPU cooling fan plugged into incorrect header
  3. Missing GPU auxiliary PCIe power connection
  4. CPU virtualization extension disabled in firmware

Explanation

Correct Answer

A:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

Incorrect Answers

B:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

C:

The GPU documentation requires a specific PCIe power plug and the connector is not attached, consistent with a missing gpu auxiliary pcie power connection.

D:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

Question 406

During a support incident, A gaming desktop's graphics card requires a separate auxiliary power connector and crashes as soon as 3D load increases. What is the most likely technical explanation?

  1. PCIe x16 slot requirement for common graphics cards
  2. CPU cooling fan plugged into incorrect header
  3. Insufficient thermal interface between CPU and heatsink
  4. Missing GPU auxiliary PCIe power connection

Explanation

Correct Answer

D:

The GPU documentation requires a specific PCIe power plug and the connector is not attached, consistent with a missing gpu auxiliary pcie power connection.

Incorrect Answers

A:

The card has an x16 edge connector and a specified lane and chassis-space requirement, consistent with a pcie x16 slot requirement for common graphics cards.

B:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

C:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

Question 407

A motherboard reports CPU fan failure at startup even though a case fan is spinning; the processor cooler was plugged into a chassis-fan header. Which failure mode should the technician prioritize?

  1. CPU virtualization extension disabled in firmware
  2. Motherboard internal header connection mismatch
  3. Insufficient thermal interface between CPU and heatsink
  4. CPU cooling fan plugged into incorrect header

Explanation

Correct Answer

D:

The CPU_FAN header is empty while the actual cooler lead is attached to SYS_FAN, consistent with a cpu cooling fan plugged into incorrect header.

Incorrect Answers

A:

Firmware reports the processor's virtualization feature as disabled despite compatible CPU specifications, consistent with a cpu virtualization extension disabled in firmware.

B:

The chassis front-panel cable and board manual identify different header pinouts, consistent with a motherboard internal header connection mismatch.

C:

A properly spinning fan is present, but the heat spreader has dry or uneven thermal compound, consistent with an insufficient thermal interface between cpu and heatsink.

Question 408

A help-desk ticket states: A legacy desktop PSU has a manual voltage selector set to 115 V but the computer is moved to a 230 V mains supply. Which diagnosis is best supported rather than simply possible?

  1. Missing motherboard 24-pin ATX power connection
  2. Incorrect PSU input voltage selection
  3. Insufficient PSU wattage and headroom
  4. Incompatible modular PSU cable pinout risk

Explanation

Correct Answer

B:

The supply's rating label and selector position do not match the local AC voltage, consistent with an incorrect psu input voltage selection.

Incorrect Answers

A:

The PSU main 20+4 pin connector is disconnected from the motherboard socket, consistent with a missing motherboard 24-pin atx power connection.

C:

Measured peak power and required PCIe power connectors exceed the PSU's continuous rating, consistent with an insufficient psu wattage and headroom.

D:

The new PSU's cable pinout is not confirmed compatible with the old modular cable set, consistent with an incompatible modular psu cable pinout risk.

Question 409

When comparing several hypotheses, a technician observes: A motherboard receives standby power but never starts; the main board connector is unplugged even though drive power plugs are connected. Which condition best fits?

  1. Redundant hot-swappable power supply modules
  2. Incorrect PSU input voltage selection
  3. Missing motherboard 24-pin ATX power connection
  4. Incompatible modular PSU cable pinout risk

Explanation

Correct Answer

C:

The PSU main 20+4 pin connector is disconnected from the motherboard socket, consistent with a missing motherboard 24-pin atx power connection.

Incorrect Answers

A:

The chassis supports two PSU modules and can remain powered with one module disconnected, consistent with a redundant hot-swappable power supply modules.

B:

The supply's rating label and selector position do not match the local AC voltage, consistent with an incorrect psu input voltage selection.

D:

The new PSU's cable pinout is not confirmed compatible with the old modular cable set, consistent with an incompatible modular psu cable pinout risk.

Question 410

A technician investigates this device problem: A graphics workstation adds a second GPU and begins restarting when both GPUs reach high load because total demand exceeds the old supply. Which diagnosis best explains the observed pattern?

  1. Incompatible modular PSU cable pinout risk
  2. Redundant hot-swappable power supply modules
  3. Insufficient PSU wattage and headroom
  4. Incorrect PSU input voltage selection

Explanation

Correct Answer

C:

Measured peak power and required PCIe power connectors exceed the PSU's continuous rating, consistent with an insufficient psu wattage and headroom.

Incorrect Answers

A:

The new PSU's cable pinout is not confirmed compatible with the old modular cable set, consistent with an incompatible modular psu cable pinout risk.

B:

The chassis supports two PSU modules and can remain powered with one module disconnected, consistent with a redundant hot-swappable power supply modules.

D:

The supply's rating label and selector position do not match the local AC voltage, consistent with an incorrect psu input voltage selection.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests