Question 250 A metropolitan transit operator is standardizing CI lifecycle values for station controllers and cloud gateway services. A device is operational but under maintenance. What is the most defensible ServiceNow approach? Express the operational stage with the appropriate supported maintenance status for its entity type Use an approved Operational lifecycle status reflecting maintenance for the tangible CI Apply approved lifecycle transitions and retention policy rather than treating it as a normal active CI Review the supported lifecycle-control combinations before updating the record Explanation Correct Answer A:A broad operational stage alone does not distinguish active use from temporary maintenance. Incorrect Answers B:Stage/status pairs communicate finer status without representing maintenance as disposal or End of Life. C:Retirement and archival decisions should reflect both current service use and retention obligations. D:Allowed stage/status pairs depend on entity type and prevent contradictory lifecycle states.
Question 251 A metropolitan transit operator is standardizing CI lifecycle values for station controllers and cloud gateway services. A controller is End of Life but remains in a technical recovery process. Which implementation should the CMDB team select? Apply approved lifecycle transitions and retention policy rather than treating it as a normal active CI Review the supported lifecycle-control combinations before updating the record Map legacy status values to appropriate Life Cycle Stage and Stage Status pairs Inspect activated lifecycle synchronization and applicable mapping rules Explanation Correct Answer A:Retirement and archival decisions should reflect both current service use and retention obligations. Incorrect Answers B:Allowed stage/status pairs depend on entity type and prevent contradictory lifecycle states. C:CSDM lifecycle mappings create comparable states without overwriting historical meaning indiscriminately. D:While Inspect activated lifecycle synchronization and applicable mapping rules is suitable if the team changes legacy install status but the standardized lifecycle pair remains out of sync because standardized lifecycle values require configured mappings from the legacy source fields, the presented problem is a controller is End of Life but remains in a technical recovery process, making Apply approved lifecycle transitions and retention policy rather than treating it as a normal active CI the better choice.
Question 252 A metropolitan transit operator is standardizing CI lifecycle values for station controllers and cloud gateway services. An engineer tries to assign a lifecycle status that is invalid for that CI entity type. Which action best addresses the specific requirement? Inspect activated lifecycle synchronization and applicable mapping rules Map legacy status values to appropriate Life Cycle Stage and Stage Status pairs Review the supported lifecycle-control combinations before updating the record Express the operational stage with the appropriate supported maintenance status for its entity type Explanation Correct Answer C:Allowed stage/status pairs depend on entity type and prevent contradictory lifecycle states. Incorrect Answers A:Standardized lifecycle values require configured mappings from the legacy source fields. B:CSDM lifecycle mappings create comparable states without overwriting historical meaning indiscriminately. D:A broad operational stage alone does not distinguish active use from temporary maintenance.
Question 253 A banking group is defining principal classes and status mappings for physical servers and virtual application services. Senior engineers need a focused dashboard for infrastructure supporting customer transactions. Which choice most directly solves this issue? Configure the supported legacy-to-lifecycle pair mappings and validate resulting values Configure class-level ownership and validate it before assigning Data Manager approvals Mark relevant servers, databases and key network classes as principal after governance review Represent its actual operational state and end-of-support status before deciding on retirement Explanation Correct Answer C:Principal selection helps monitoring and remediation concentrate on CIs with meaningful business service impact. Incorrect Answers A:Explicit mappings support consistent lifecycle analytics without assuming identical labels across applications. B:While Configure class-level ownership and validate it before assigning Data Manager approvals is suitable if a principal server class lacks a Managed by Group value because responsible groups are essential for routing policy and health tasks to the correct stewards, the presented problem is senior engineers need a focused dashboard for infrastructure supporting customer transactions, making Mark relevant servers, databases and key network classes as principal after governance review the better choice. D:End of support can occur while an application remains operational and does not prove the service is already decommissioned.
Question 254 A banking group is defining principal classes and status mappings for physical servers and virtual application services. A new service class is flagged as principal but lacks ownership and discovery controls. How should the team proceed without weakening data integrity? Mark relevant servers, databases and key network classes as principal after governance review Represent its actual operational state and end-of-support status before deciding on retirement Add the appropriate class governance, identifiers and managed-by responsibilities Configure class-level ownership and validate it before assigning Data Manager approvals Explanation Correct Answer C:Principal designation does not automatically supply correct source identity or operational stewardship. Incorrect Answers A:While Mark relevant servers, databases and key network classes as principal after governance review is suitable if senior engineers need a focused dashboard for infrastructure supporting customer transactions because principal selection helps monitoring and remediation concentrate on CIs with meaningful business service impact, the presented problem is a new service class is flagged as principal but lacks ownership and discovery controls, making Add the appropriate class governance, identifiers and managed-by responsibilities the better choice. B:End of support can occur while an application remains operational and does not prove the service is already decommissioned. D:Responsible groups are essential for routing policy and health tasks to the correct stewards.
Question 255 A banking group is defining principal classes and status mappings for physical servers and virtual application services. Finance assets use a legacy state vocabulary while CIs use standardized CSDM stages. Which option matches this operational need? Configure the supported legacy-to-lifecycle pair mappings and validate resulting values Mark relevant servers, databases and key network classes as principal after governance review Add the appropriate class governance, identifiers and managed-by responsibilities Inspect activated lifecycle synchronization and applicable mapping rules Explanation Correct Answer A:Explicit mappings support consistent lifecycle analytics without assuming identical labels across applications. Incorrect Answers B:Principal selection helps monitoring and remediation concentrate on CIs with meaningful business service impact. C:Principal designation does not automatically supply correct source identity or operational stewardship. D:Standardized lifecycle values require configured mappings from the legacy source fields.
Question 256 A banking group is defining principal classes and status mappings for physical servers and virtual application services. A virtual application is still running after its vendor ends support. What should the implementation specialist do next? Add the appropriate class governance, identifiers and managed-by responsibilities Use an approved Operational lifecycle status reflecting maintenance for the tangible CI Represent its actual operational state and end-of-support status before deciding on retirement Configure the supported legacy-to-lifecycle pair mappings and validate resulting values Explanation Correct Answer C:End of support can occur while an application remains operational and does not prove the service is already decommissioned. Incorrect Answers A:Principal designation does not automatically supply correct source identity or operational stewardship. B:Stage/status pairs communicate finer status without representing maintenance as disposal or End of Life. D:Explicit mappings support consistent lifecycle analytics without assuming identical labels across applications.
Question 257 A national medical laboratory is managing the lifecycle of expensive imaging appliances under a CSDM adoption initiative. Procurement reports an in-stock device not yet deployed as a clinical CI. Which implementation should the CMDB team select? Use an approved Operational lifecycle status reflecting maintenance for the tangible CI Preserve separate asset procurement status and the device's actual CI lifecycle stage Remove it from the principal scope only after reviewing affected processes and reports Maintain validated lifecycle stage/status changes with accountable approval and audit history Explanation Correct Answer B:A purchased asset need not already represent a fully operational clinical service configuration. Incorrect Answers A:Stage/status pairs communicate finer status without representing maintenance as disposal or End of Life. C:Overbroad principal-class selection dilutes operational attention and may increase irrelevant remediation work. D:A consistent transition record supports retention and operational continuity review better than one final state label.
Question 258 A national medical laboratory is managing the lifecycle of expensive imaging appliances under a CSDM adoption initiative. An imaging appliance enters a planned maintenance window. Which action best addresses the specific requirement? Preserve separate asset procurement status and the device's actual CI lifecycle stage Express the operational stage with the appropriate supported maintenance status for its entity type Inspect activated lifecycle synchronization and applicable mapping rules Use an approved Operational lifecycle status reflecting maintenance for the tangible CI Explanation Correct Answer D:Stage/status pairs communicate finer status without representing maintenance as disposal or End of Life. Incorrect Answers A:A purchased asset need not already represent a fully operational clinical service configuration. B:A broad operational stage alone does not distinguish active use from temporary maintenance. C:Standardized lifecycle values require configured mappings from the legacy source fields.
Question 259 A national medical laboratory is managing the lifecycle of expensive imaging appliances under a CSDM adoption initiative. The team changes legacy install status but the standardized lifecycle pair remains out of sync. What should the administrator verify or change? Use an approved Operational lifecycle status reflecting maintenance for the tangible CI Inspect activated lifecycle synchronization and applicable mapping rules Maintain validated lifecycle stage/status changes with accountable approval and audit history Map legacy status values to appropriate Life Cycle Stage and Stage Status pairs Explanation Correct Answer B:Standardized lifecycle values require configured mappings from the legacy source fields. Incorrect Answers A:Stage/status pairs communicate finer status without representing maintenance as disposal or End of Life. C:A consistent transition record supports retention and operational continuity review better than one final state label. D:While Map legacy status values to appropriate Life Cycle Stage and Stage Status pairs is suitable if legacy install statuses are inconsistent with the shared lifecycle model because cSDM lifecycle mappings create comparable states without overwriting historical meaning indiscriminately, the presented problem is the team changes legacy install status but the standardized lifecycle pair remains out of sync, making Inspect activated lifecycle synchronization and applicable mapping rules the better choice.
Question 260 A national medical laboratory is managing the lifecycle of expensive imaging appliances under a CSDM adoption initiative. Auditors need to compare transitions for lab CIs from installation through retirement. Which choice most directly solves this issue? Preserve separate asset procurement status and the device's actual CI lifecycle stage Maintain validated lifecycle stage/status changes with accountable approval and audit history Inspect activated lifecycle synchronization and applicable mapping rules Apply approved lifecycle transitions and retention policy rather than treating it as a normal active CI Explanation Correct Answer B:A consistent transition record supports retention and operational continuity review better than one final state label. Incorrect Answers A:A purchased asset need not already represent a fully operational clinical service configuration. C:While Inspect activated lifecycle synchronization and applicable mapping rules is suitable if the team changes legacy install status but the standardized lifecycle pair remains out of sync because standardized lifecycle values require configured mappings from the legacy source fields, the presented problem is auditors need to compare transitions for lab CIs from installation through retirement, making Maintain validated lifecycle stage/status changes with accountable approval and audit history the better choice. D:Retirement and archival decisions should reflect both current service use and retention obligations.