McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 94

Question 930

At fictional Harborview ISP 233, a regional service-provider network, during a two-site transit migration, operations observes: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. Why is this particular correction the best fit for the stated defect?

  1. A link aggregation group forwards correctly only over members meeting the operational bundle requirements.
  2. High availability must be evaluated by usable service forwarding as well as control-plane states.
  3. Graceful restart relies on appropriate protocol and neighbor support to retain forwarding through control-plane recovery.
  4. A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane.

Explanation

Correct Answer

A:

A link aggregation group forwards correctly only over members meeting the operational bundle requirements. Align supported member configuration and verify aggregation state and distributed traffic. Both intended links join the bundle and sample traffic uses approved members.

Incorrect Answers

B:

High availability must be evaluated by usable service forwarding as well as control-plane states. This could help if an availability test is signed off because BFD and VRRP report healthy, but customer packets still drop during failover, but not when a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

C:

Graceful restart relies on appropriate protocol and neighbor support to retain forwarding through control-plane recovery. This relates to a case where a provider assumes graceful restart will work during a routing process restart without considering neighbor support; the current situation is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

D:

A healthy IS-IS adjacency does not prove the intended shortest path is active in the forwarding plane. It is useful for situations where the IS-IS session reports established but a core prefix still follows an unexpected path after a circuit metric change; the reported fault, though, is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 931

At fictional Harborview ISP 233, a regional service-provider network, during a two-site transit migration, operations observes: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. What direct observation would prove the corrective action worked?

  1. The backup becomes master during a controlled failure and hosts retain gateway reachability.
  2. MAC tables and customer bridge forwarding remain stable during controlled switchover.
  3. Customer subnet is visible in the IGP but no neighbor session forms on the LAN.
  4. Both intended links join the bundle and sample traffic uses approved members.

Explanation

Correct Answer

D:

Both intended links join the bundle and sample traffic uses approved members. A link aggregation group forwards correctly only over members meeting the operational bundle requirements. Align supported member configuration and verify aggregation state and distributed traffic.

Incorrect Answers

A:

The backup becomes master during a controlled failure and hosts retain gateway reachability. This is applicable when an access VLAN loses default-gateway access after the primary router fails because the backup's VRRP state is incorrect; the present condition is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

B:

MAC tables and customer bridge forwarding remain stable during controlled switchover. It is relevant if a switch with redundant Routing Engines loses Layer 2 MAC learning state during switchover despite planned availability targets, but the reported issue is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

C:

Customer subnet is visible in the IGP but no neighbor session forms on the LAN. This could help if a provider PE inadvertently attempts to form an OSPF adjacency on a customer LAN that should advertise reachability only, but not when a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 932

At fictional Harborview ISP 233, a regional service-provider network, during a two-site transit migration, operations observes: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. Which failure consequence follows most closely from ignoring this issue?

  1. A single member fault causes a complete customer circuit outage.
  2. Half the expected capacity is unavailable and link failover is fragile.
  3. Customers experience extended blackholes before alternate paths take over.
  4. A sensitive workload unexpectedly traverses a different core link.

Explanation

Correct Answer

B:

Half the expected capacity is unavailable and link failover is fragile. A link aggregation group forwards correctly only over members meeting the operational bundle requirements. Align supported member configuration and verify aggregation state and distributed traffic.

Incorrect Answers

A:

A single member fault causes a complete customer circuit outage. That could help when a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails; here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

C:

Customers experience extended blackholes before alternate paths take over. It is relevant if a core route remains active long after a forwarding path fails because the routing protocol's regular timeout is too slow, but the reported issue is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

D:

A sensitive workload unexpectedly traverses a different core link. This could help if a team assumes an SR prefix segment guarantees a strict hop-by-hop explicit path, but traffic follows the current IGP shortest path, but not when a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 933

In a separate fictional JNCIS-SP lab review for Greenbridge ISP 234, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. What intervention most directly restores the intended routing or switching behavior?

  1. Configure and validate supported GRES readiness before an authorized controlled failover.
  2. Measure end-to-end service continuity while exercising the planned HA transition and inspect forwarding state.
  3. Align supported member configuration and verify aggregation state and distributed traffic.
  4. Review DIS selection parameters and verify pseudonode origination for the LAN.

Explanation

Correct Answer

C:

Align supported member configuration and verify aggregation state and distributed traffic. Both intended links join the bundle and sample traffic uses approved members. A link aggregation group forwards correctly only over members meeting the operational bundle requirements.

Incorrect Answers

A:

Configure and validate supported GRES readiness before an authorized controlled failover. This could matter when a planned Routing Engine switchover resets forwarding unexpectedly because chassis graceful switchover was not prepared. In this case, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

B:

Measure end-to-end service continuity while exercising the planned HA transition and inspect forwarding state. That could help when an availability test is signed off because BFD and VRRP report healthy, but customer packets still drop during failover; here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

D:

Review DIS selection parameters and verify pseudonode origination for the LAN. It is relevant if operators see two possible LAN-designated routers and assume the wrong one leads routing for the shared segment, but the reported issue is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 934

In a separate fictional JNCIS-SP lab review for Greenbridge ISP 234, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. Which networking principle explains why the proposed correction is appropriate?

  1. A link aggregation group forwards correctly only over members meeting the operational bundle requirements.
  2. BFD can detect forwarding-path failure more promptly than many ordinary routing protocol timers.
  3. Graceful restart relies on appropriate protocol and neighbor support to retain forwarding through control-plane recovery.
  4. Link-local IPv6 addresses are scoped to a link and require an appropriate interface context.

Explanation

Correct Answer

A:

A link aggregation group forwards correctly only over members meeting the operational bundle requirements. Both intended links join the bundle and sample traffic uses approved members. Align supported member configuration and verify aggregation state and distributed traffic.

Incorrect Answers

B:

BFD can detect forwarding-path failure more promptly than many ordinary routing protocol timers. This could matter when a core route remains active long after a forwarding path fails because the routing protocol's regular timeout is too slow. In this case, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

C:

Graceful restart relies on appropriate protocol and neighbor support to retain forwarding through control-plane recovery. That could help when a provider assumes graceful restart will work during a routing process restart without considering neighbor support; here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

D:

Link-local IPv6 addresses are scoped to a link and require an appropriate interface context. This is applicable when an IPv6 adjacency uses a link-local next hop, but its interface scope is omitted from the implementation design; the present condition is that a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 935

In a separate fictional JNCIS-SP lab review for Greenbridge ISP 234, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. Which validation result would confirm the design is now functioning?

  1. Loss of one link leaves the logical bundle up and service traffic continues on the other.
  2. BGP and IGP neighbors remain stable through a controlled Routing Engine switchover.
  3. Both intended links join the bundle and sample traffic uses approved members.
  4. The primary path stays selected normally and the backup is activated only when the primary is unavailable.

Explanation

Correct Answer

C:

Both intended links join the bundle and sample traffic uses approved members. Align supported member configuration and verify aggregation state and distributed traffic. A link aggregation group forwards correctly only over members meeting the operational bundle requirements.

Incorrect Answers

A:

Loss of one link leaves the logical bundle up and service traffic continues on the other. That option concerns a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails. The problem here is different: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

B:

BGP and IGP neighbors remain stable through a controlled Routing Engine switchover. It addresses a different problem: Traffic briefly vanishes after a Routing Engine failure because the backup does not maintain protocol state. Here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

D:

The primary path stays selected normally and the backup is activated only when the primary is unavailable. That could help when a fallback static route takes traffic away from a healthy primary connection because its route preference was set too low; here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 936

In a separate fictional JNCIS-SP lab review for Greenbridge ISP 234, a carrier-edge and core routing team, following a backbone resilience drill, engineers find: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. What likely service impact does this condition create?

  1. A single gateway device fault disconnects all hosts on the VLAN.
  2. A supervisor failure forces routing protocol reconvergence and drops customer traffic.
  3. Transport LSPs are absent despite healthy basic IP routing.
  4. Half the expected capacity is unavailable and link failover is fragile.

Explanation

Correct Answer

D:

Half the expected capacity is unavailable and link failover is fragile. Align supported member configuration and verify aggregation state and distributed traffic. A link aggregation group forwards correctly only over members meeting the operational bundle requirements.

Incorrect Answers

A:

A single gateway device fault disconnects all hosts on the VLAN. The choice would be appropriate if an access VLAN loses default-gateway access after the primary router fails because the backup's VRRP state is incorrect. Here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

B:

A supervisor failure forces routing protocol reconvergence and drops customer traffic. That option concerns traffic briefly vanishes after a Routing Engine failure because the backup does not maintain protocol state. The problem here is different: A bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

C:

Transport LSPs are absent despite healthy basic IP routing. It addresses a different problem: Two core routers cannot form an LDP session even though they discover one another on the connected link. Here, a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ.

Question 937

At fictional Fairhaven Broadband 235, a regional service-provider network, during a preproduction design validation, operations observes: A provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails. Which configuration or operational correction most directly addresses this failure?

  1. Measure end-to-end service continuity while exercising the planned HA transition and inspect forwarding state.
  2. Run a controlled member failure test and verify surviving-link service forwarding.
  3. Configure supported BFD monitoring with the neighbor protocol and validate failure detection behavior.
  4. Align the intended IS-IS level capability for the shared link and inspect resulting adjacency.

Explanation

Correct Answer

B:

Run a controlled member failure test and verify surviving-link service forwarding. LAG availability depends on traffic being redirected to healthy active members after failure. Loss of one link leaves the logical bundle up and service traffic continues on the other.

Incorrect Answers

A:

Measure end-to-end service continuity while exercising the planned HA transition and inspect forwarding state. This addresses a situation in which an availability test is signed off because BFD and VRRP report healthy, but customer packets still drop during failover; however, a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

C:

Configure supported BFD monitoring with the neighbor protocol and validate failure detection behavior. That option concerns a core route remains active long after a forwarding path fails because the routing protocol's regular timeout is too slow. The problem here is different: A provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

D:

Align the intended IS-IS level capability for the shared link and inspect resulting adjacency. It addresses a different problem: Two adjacent core routers cannot establish IS-IS because one is configured only for Level 1 and the other only for Level 2. Here, a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

Question 938

At fictional Fairhaven Broadband 235, a regional service-provider network, during a preproduction design validation, operations observes: A provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails. Which Junos forwarding or control-plane rule applies to this case?

  1. LAG availability depends on traffic being redirected to healthy active members after failure.
  2. High availability must be evaluated by usable service forwarding as well as control-plane states.
  3. NSB is intended to maintain relevant Layer 2 control-plane continuity through supported failover.
  4. The OSPF router ID uniquely identifies a router in link-state advertisements.

Explanation

Correct Answer

A:

LAG availability depends on traffic being redirected to healthy active members after failure. Run a controlled member failure test and verify surviving-link service forwarding. Loss of one link leaves the logical bundle up and service traffic continues on the other.

Incorrect Answers

B:

High availability must be evaluated by usable service forwarding as well as control-plane states. This addresses a situation in which an availability test is signed off because BFD and VRRP report healthy, but customer packets still drop during failover; however, a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

C:

NSB is intended to maintain relevant Layer 2 control-plane continuity through supported failover. The choice would be appropriate if a switch with redundant Routing Engines loses Layer 2 MAC learning state during switchover despite planned availability targets. Here, a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

D:

The OSPF router ID uniquely identifies a router in link-state advertisements. That option concerns two routers in the same routing domain advertise the same OSPF router ID after cloning a lab template. The problem here is different: A provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

Question 939

At fictional Fairhaven Broadband 235, a regional service-provider network, during a preproduction design validation, operations observes: A provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails. What operational evidence best establishes successful remediation?

  1. During a staged failover, probes reach the customer service within the approved recovery threshold.
  2. Both intended links join the bundle and sample traffic uses approved members.
  3. Relevant LSAs are refreshed consistently and the route remains active across the observation period.
  4. Loss of one link leaves the logical bundle up and service traffic continues on the other.

Explanation

Correct Answer

D:

Loss of one link leaves the logical bundle up and service traffic continues on the other. LAG availability depends on traffic being redirected to healthy active members after failure. Run a controlled member failure test and verify surviving-link service forwarding.

Incorrect Answers

A:

During a staged failover, probes reach the customer service within the approved recovery threshold. It is useful for situations where an availability test is signed off because BFD and VRRP report healthy, but customer packets still drop during failover; the reported fault, though, is that a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

B:

Both intended links join the bundle and sample traffic uses approved members. That relates to circumstances in which a bundled uplink has two configured members but only one is usable because the second member's operational parameters differ. Here the problem is that a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

C:

Relevant LSAs are refreshed consistently and the route remains active across the observation period. This addresses a situation in which an OSPF route vanishes intermittently because a neighbor cannot refresh topology information after repeated link resets; however, a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

Question 940

At fictional Fairhaven Broadband 235, a regional service-provider network, during a preproduction design validation, operations observes: A provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails. Which operational harm would persist without the intended correction?

  1. Maintenance triggers avoidable traffic loss and prolonged recovery.
  2. A single gateway device fault disconnects all hosts on the VLAN.
  3. Intermittent route loss causes repeated customer outages.
  4. A single member fault causes a complete customer circuit outage.

Explanation

Correct Answer

D:

A single member fault causes a complete customer circuit outage. LAG availability depends on traffic being redirected to healthy active members after failure. Run a controlled member failure test and verify surviving-link service forwarding.

Incorrect Answers

A:

Maintenance triggers avoidable traffic loss and prolonged recovery. This relates to a case where a planned Routing Engine switchover resets forwarding unexpectedly because chassis graceful switchover was not prepared; the current situation is that a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

B:

A single gateway device fault disconnects all hosts on the VLAN. It is useful for situations where an access VLAN loses default-gateway access after the primary router fails because the backup's VRRP state is incorrect; the reported fault, though, is that a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

C:

Intermittent route loss causes repeated customer outages. That relates to circumstances in which an upstream prefix repeatedly withdraws and returns but the operations view shows only the current best route. Here the problem is that a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests