McAfee Secured

Exam Code: JN0-364

Exam Name: Service Provider Routing and Switching, Specialist (JNCIS-SP)

Certification Provider: Juniper

100% Juniper JN0-364 Guaranteed Success With Testking Training Materials

Get Real JN0-364 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

69 Questions & Answers with Testing Engine

"Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam", also known as JN0-364 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-364 Exam Engine. Your JN0-364 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-364 Practice Test 64

Question 630

In a separate fictional JNCIS-SP lab review for Harborview ISP 158, a carrier-edge and core routing team, following a monitored network change window, engineers find: A customer-facing bridge advertises a superior root and takes over the provider STP topology. Which networking principle explains why the proposed correction is appropriate?

  1. Root protection maintains root placement by preventing an untrusted port from becoming an upstream root path.
  2. Spanning tree selects a root bridge to build a loop-free Layer 2 forwarding topology.
  3. Physical link-up does not imply permission to forward under spanning-tree loop prevention.
  4. MPLS TTL handling can affect the hop visibility of path diagnostics.

Explanation

Correct Answer

A:

Root protection maintains root placement by preventing an untrusted port from becoming an upstream root path. A superior BPDU on the customer link is blocked from changing the intended root. Use root protection on designated protected links and verify superior BPDU handling.

Incorrect Answers

B:

Spanning tree selects a root bridge to build a loop-free Layer 2 forwarding topology. This could help if a low-capacity access switch becomes STP root after a new bridge priority setting, but not when a customer-facing bridge advertises a superior root and takes over the provider STP topology.

C:

Physical link-up does not imply permission to forward under spanning-tree loop prevention. This relates to a case where a link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics; the current situation is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

D:

MPLS TTL handling can affect the hop visibility of path diagnostics. It is useful for situations where traceroute across an MPLS core shows fewer visible routers than expected and engineers assume the packets are taking a forbidden shortcut; the reported fault, though, is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

Question 631

In a separate fictional JNCIS-SP lab review for Harborview ISP 158, a carrier-edge and core routing team, following a monitored network change window, engineers find: A customer-facing bridge advertises a superior root and takes over the provider STP topology. Which validation result would confirm the design is now functioning?

  1. The port's intentional blocking reason and root path are verified in control-plane output.
  2. The affected VLAN has the desired root and its forwarding path recovers.
  3. A superior BPDU on the customer link is blocked from changing the intended root.
  4. The customer route is active in the routing table and its forwarding next hop points to the reachable transit interface.

Explanation

Correct Answer

C:

A superior BPDU on the customer link is blocked from changing the intended root. Use root protection on designated protected links and verify superior BPDU handling. Root protection maintains root placement by preventing an untrusted port from becoming an upstream root path.

Incorrect Answers

A:

The port's intentional blocking reason and root path are verified in control-plane output. This is applicable when a link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics; the present condition is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

B:

The affected VLAN has the desired root and its forwarding path recovers. It is relevant if one VLAN becomes unavailable after administrators assume the same spanning-tree root applies identically to all VLANs, but the reported issue is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

D:

The customer route is active in the routing table and its forwarding next hop points to the reachable transit interface. This relates to a case where a provider edge has a static route for a customer prefix, but its next hop resolves only through a disconnected interface; the current situation is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

Question 632

In a separate fictional JNCIS-SP lab review for Harborview ISP 158, a carrier-edge and core routing team, following a monitored network change window, engineers find: A customer-facing bridge advertises a superior root and takes over the provider STP topology. What likely service impact does this condition create?

  1. Customer equipment captures the root role and disrupts forwarding.
  2. A routine template update makes the provider bridge vulnerable to a customer-induced loop.
  3. Unnecessary physical changes introduce instability without fixing the actual topology constraint.
  4. An inappropriate summary attracts packets for destinations the provider cannot actually reach.

Explanation

Correct Answer

A:

Customer equipment captures the root role and disrupts forwarding. Use root protection on designated protected links and verify superior BPDU handling. Root protection maintains root placement by preventing an untrusted port from becoming an upstream root path.

Incorrect Answers

B:

A routine template update makes the provider bridge vulnerable to a customer-induced loop. This is applicable when a configuration change enables a customer loop-prevention override that also disables root and BPDU safeguards; the present condition is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

C:

Unnecessary physical changes introduce instability without fixing the actual topology constraint. It is relevant if a link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics, but the reported issue is that a customer-facing bridge advertises a superior root and takes over the provider STP topology.

D:

An inappropriate summary attracts packets for destinations the provider cannot actually reach. This could help if a summary prefix is advertised even though operators have not confirmed which customer specifics contribute to it, but not when a customer-facing bridge advertises a superior root and takes over the provider STP topology.

Question 633

At fictional Greenbridge ISP 159, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. Which configuration or operational correction most directly addresses this failure?

  1. Configure supported loop protection where appropriate and test loss-of-BPDU behavior.
  2. Align the intended MSTP region parameters and VLAN-to-instance mapping on both switches.
  3. Assign planned bridge priorities and verify root and alternate port roles.
  4. Check ABR area participation and intended interarea advertisement and restore correct connectivity.

Explanation

Correct Answer

A:

Configure supported loop protection where appropriate and test loss-of-BPDU behavior. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs. The suspect port remains in the protected state until valid BPDU information returns.

Incorrect Answers

B:

Align the intended MSTP region parameters and VLAN-to-instance mapping on both switches. That could help when two interconnected switches place the same VLAN in different MSTP instances, leading to inconsistent blocking behavior; here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

Assign planned bridge priorities and verify root and alternate port roles. This is applicable when a low-capacity access switch becomes STP root after a new bridge priority setting; the present condition is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

Check ABR area participation and intended interarea advertisement and restore correct connectivity. It is relevant if a site advertises internal prefixes inside one area, but a remote OSPF area cannot learn them because the area border configuration is incomplete, but the reported issue is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 634

At fictional Greenbridge ISP 159, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. Which Junos forwarding or control-plane rule applies to this case?

  1. Root protection maintains root placement by preventing an untrusted port from becoming an upstream root path.
  2. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs.
  3. Physical link-up does not imply permission to forward under spanning-tree loop prevention.
  4. MPLS transit forwarding depends on installed label operations at each participating node.

Explanation

Correct Answer

B:

Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs. Configure supported loop protection where appropriate and test loss-of-BPDU behavior. The suspect port remains in the protected state until valid BPDU information returns.

Incorrect Answers

A:

Root protection maintains root placement by preventing an untrusted port from becoming an upstream root path. It addresses a different problem: A customer-facing bridge advertises a superior root and takes over the provider STP topology. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

Physical link-up does not imply permission to forward under spanning-tree loop prevention. That could help when a link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics; here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

MPLS transit forwarding depends on installed label operations at each participating node. This is applicable when an MPLS LSP is reported as configured but the expected outgoing label swap entry is missing; the present condition is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 635

At fictional Greenbridge ISP 159, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. What operational evidence best establishes successful remediation?

  1. The affected VLAN has the desired root and its forwarding path recovers.
  2. The intended distribution bridge is root and access ports show expected roles.
  3. The suspect port remains in the protected state until valid BPDU information returns.
  4. Loss of one link leaves the logical bundle up and service traffic continues on the other.

Explanation

Correct Answer

C:

The suspect port remains in the protected state until valid BPDU information returns. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs. Configure supported loop protection where appropriate and test loss-of-BPDU behavior.

Incorrect Answers

A:

The affected VLAN has the desired root and its forwarding path recovers. That option concerns one VLAN becomes unavailable after administrators assume the same spanning-tree root applies identically to all VLANs. The problem here is different: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

B:

The intended distribution bridge is root and access ports show expected roles. It addresses a different problem: A low-capacity access switch becomes STP root after a new bridge priority setting. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

Loss of one link leaves the logical bundle up and service traffic continues on the other. That could help when a provider assumes a two-member LAG is redundant but has never checked forwarding when one member fails; here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 636

At fictional Greenbridge ISP 159, a regional service-provider network, during a subscriber traffic restoration exercise, operations observes: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. Which operational harm would persist without the intended correction?

  1. An unnoticed bridging loop can trigger widespread broadcast storms.
  2. A redundant Layer 2 link becomes a forwarding loop and floods the provider network.
  3. Unnecessary physical changes introduce instability without fixing the actual topology constraint.
  4. Traffic follows an obsolete service path or reaches the wrong customer site.

Explanation

Correct Answer

B:

A redundant Layer 2 link becomes a forwarding loop and floods the provider network. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs. Configure supported loop protection where appropriate and test loss-of-BPDU behavior.

Incorrect Answers

A:

An unnoticed bridging loop can trigger widespread broadcast storms. The choice would be appropriate if a switch port connecting another bridge is incorrectly marked as an edge port, weakening normal loop-avoidance behavior. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

Unnecessary physical changes introduce instability without fixing the actual topology constraint. It addresses a different problem: A link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

Traffic follows an obsolete service path or reaches the wrong customer site. This could matter when a MAC is learned on an unexpected aggregation interface following a customer circuit move. In this case, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 637

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 160, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. What should the Junos specialist change first to resolve this specific fault?

  1. Align the intended MSTP region parameters and VLAN-to-instance mapping on both switches.
  2. Configure supported loop protection where appropriate and test loss-of-BPDU behavior.
  3. Adopt the supported rapid spanning-tree configuration consistently and validate role transitions.
  4. Apply the supported LDP and IGP synchronization design and verify staged activation.

Explanation

Correct Answer

B:

Configure supported loop protection where appropriate and test loss-of-BPDU behavior. The suspect port remains in the protected state until valid BPDU information returns. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs.

Incorrect Answers

A:

Align the intended MSTP region parameters and VLAN-to-instance mapping on both switches. This addresses a situation in which two interconnected switches place the same VLAN in different MSTP instances, leading to inconsistent blocking behavior; however, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

Adopt the supported rapid spanning-tree configuration consistently and validate role transitions. That option concerns a redundant access network takes far too long to recover from a link failure because it uses inappropriate legacy STP behavior. The problem here is different: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

Apply the supported LDP and IGP synchronization design and verify staged activation. It addresses a different problem: A new core link attracts IP routes before its LDP labels are ready, causing a transient service outage. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 638

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 160, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. What technical principle underlies the right remedy?

  1. BPDU protection prevents inappropriate participation in spanning-tree control at protected edge ports.
  2. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs.
  3. VSTP maintains spanning-tree behavior separately for participating VLANs.
  4. IS-IS system IDs must uniquely represent participating routers in the routing domain.

Explanation

Correct Answer

B:

Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs. The suspect port remains in the protected state until valid BPDU information returns. Configure supported loop protection where appropriate and test loss-of-BPDU behavior.

Incorrect Answers

A:

BPDU protection prevents inappropriate participation in spanning-tree control at protected edge ports. That relates to circumstances in which a subscriber accidentally connects a switch that sends BPDUs into a provider edge expected to accept endpoints only. Here the problem is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

VSTP maintains spanning-tree behavior separately for participating VLANs. The choice would be appropriate if one VLAN becomes unavailable after administrators assume the same spanning-tree root applies identically to all VLANs. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

IS-IS system IDs must uniquely represent participating routers in the routing domain. That option concerns a device cloned from a lab template has the same IS-IS system ID as a production router. The problem here is different: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 639

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 160, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. Which acceptance finding demonstrates the affected service has recovered?

  1. The suspect port remains in the protected state until valid BPDU information returns.
  2. The affected switches show the same region digest and expected per-instance port roles.
  3. Protection triggers on test violations and normal subscriber frames still forward.
  4. Peers retain valid routes during a tested restart and withdraw stale state after the appropriate interval.

Explanation

Correct Answer

A:

The suspect port remains in the protected state until valid BPDU information returns. Configure supported loop protection where appropriate and test loss-of-BPDU behavior. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs.

Incorrect Answers

B:

The affected switches show the same region digest and expected per-instance port roles. That relates to circumstances in which two interconnected switches place the same VLAN in different MSTP instances, leading to inconsistent blocking behavior. Here the problem is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

Protection triggers on test violations and normal subscriber frames still forward. This addresses a situation in which a configuration change enables a customer loop-prevention override that also disables root and BPDU safeguards; however, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

Peers retain valid routes during a tested restart and withdraw stale state after the appropriate interval. The choice would be appropriate if a provider assumes graceful restart will work during a routing process restart without considering neighbor support. Here, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Question 640

In a separate fictional JNCIS-SP lab review for Fairhaven Broadband 160, a carrier-edge and core routing team, following a new customer connectivity turn-up, engineers find: A blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge. What is the direct residual network risk if the fault remains unresolved?

  1. Traffic traverses unsuitable links and topology changes become disruptive.
  2. A redundant Layer 2 link becomes a forwarding loop and floods the provider network.
  3. Unnecessary physical changes introduce instability without fixing the actual topology constraint.
  4. The backbone link stays out of the routing topology or an unsafe bypass is introduced.

Explanation

Correct Answer

B:

A redundant Layer 2 link becomes a forwarding loop and floods the provider network. Configure supported loop protection where appropriate and test loss-of-BPDU behavior. Loop protection guards against unsafe forwarding transitions caused by missing control BPDUs.

Incorrect Answers

A:

Traffic traverses unsuitable links and topology changes become disruptive. This relates to a case where a low-capacity access switch becomes STP root after a new bridge priority setting; the current situation is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

C:

Unnecessary physical changes introduce instability without fixing the actual topology constraint. That relates to circumstances in which a link is physically up but stays blocked by spanning tree, and an operator incorrectly blames interface optics. Here the problem is that a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

D:

The backbone link stays out of the routing topology or an unsafe bypass is introduced. This addresses a situation in which a provider IS-IS circuit stops forming neighbors after the authentication key is changed on only one end; however, a blocked redundant link unexpectedly starts forwarding when BPDUs cease on a faulty remote bridge.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests