McAfee Secured

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

100% Huawei H12-821 Guaranteed Success With Testking Training Materials

Get Real H12-821 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 31

Question 300

The datacom engineering team at an airport facilities team while tracing a degraded application flow reviews this independent fictional networking case: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. Which corrective engineering action most directly addresses this problem?

  1. Validate PIM-SM source-specific shortest-path switching and the unicast route toward the source
  2. Verify the multicast RPF route and correct source reachability or appropriate multicast routing state
  3. Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate
  4. Enable and validate snooping with an operative querier and approved multicast router ports

Explanation

Correct Answer

A:

Validate PIM-SM source-specific shortest-path switching and the unicast route toward the source. This is the specific action that addresses the fictional fault: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. The governing technical reason is: PIM-SM can transition from a shared tree to a source-specific tree when route and policy permit. Verify by checking: The multicast route table reflects an intended source-specific incoming interface and latency improves.

Incorrect Answers

B:

A multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. Verifying the multicast RPF route and correcting source reachability or appropriate multicast routing state can respond to that condition, but it would not correct the reported fault: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. PIM-SM can transition from a shared tree to a source-specific tree when route and policy permit.

C:

A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. This is where investigating PIM-DM neighbor/prune behavior and removing unnecessary dense-mode flooding where appropriate would help. By contrast, a distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. Validate PIM-SM source-specific shortest-path switching and the unicast route toward the source.

D:

Enabling and validating snooping with an operative querier and approved multicast router ports is relevant when a switch floods a high-rate multicast feed to all access ports because no reliable IGMP snooping membership table was built. It does not resolve this case: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. The multicast route table reflects an intended source-specific incoming interface and latency improves.

Question 301

The datacom engineering team at a municipal emergency dispatch center during a topology consistency review reviews this independent fictional networking case: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. A proposed remedy is: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes. Which technical principle most directly supports this remedy?

  1. NSSA uses Type-7 external LSAs inside its area and relies on translation at an appropriate border device
  2. Totally stubby configuration suppresses most interarea summaries while retaining the area default route
  3. OSPF adjacency establishment requires compatible hello parameters on the neighbor-facing interfaces
  4. Aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space

Explanation

Correct Answer

D:

Aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space. This directly explains why the corrective operation is appropriate: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes. The observed acceptance evidence should be: The backbone receives the intended summary and test routes to each component subnet succeed.

Incorrect Answers

A:

An NSSA branch redistributes a local static route that fails to appear as expected outside the NSSA. NSSA uses Type-7 external LSAs inside its area and relies on translation at an appropriate border device. The current condition differs: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. Aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space.

B:

Totally stubby configuration suppresses most interarea summaries while retaining the area default route. That principle is relevant when branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR. Here, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied; introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes.

C:

OSPF adjacency establishment requires compatible hello parameters on the neighbor-facing interfaces. That principle is relevant when two directly connected OSPF routers see each other in packets but never establish a neighbor because their Hello and Dead timers differ. Here, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied; the backbone receives the intended summary and test routes to each component subnet succeed.

Question 302

The datacom engineering team at a cloud hosting provider after an incident review reviews this independent fictional networking case: A training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade. The team applies this remedy: Apply appropriate multicast boundary and scope controls for the group range. Which observation would directly demonstrate that this specific issue is resolved?

  1. RPF diagnostics name the arriving interface as valid and the downstream stream resumes
  2. Periodic general queries are seen and switch membership entries remain refreshed
  3. Receivers inside scope join successfully while test receivers outside it receive no multicast payload
  4. Membership remains active across multiple query intervals and the receiver continues playback

Explanation

Correct Answer

C:

Receivers inside scope join successfully while test receivers outside it receive no multicast payload. This is a directly observable check for the proposed correction: Apply appropriate multicast boundary and scope controls for the group range. The particular failure being investigated is: A training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade.

Incorrect Answers

A:

RPF diagnostics name the arriving interface as valid and the downstream stream resumes. This check belongs to a multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. The actual defect is different: A training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade. Multicast distribution should follow explicitly defined group membership and boundary policy, not blanket flooding.

B:

Periodic general queries are seen and switch membership entries remain refreshed. That result could validate a repair when a VLAN with multicast hosts has no functioning IGMP querier after its original gateway moves away. Here, a training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade; apply appropriate multicast boundary and scope controls for the group range.

D:

When an access VLAN loses a multicast receiver after a quiet period because periodic IGMP membership updates never reach the upstream querier, a result such as this is useful: Membership remains active across multiple query intervals and the receiver continues playback. For the reported fault, a training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade; unbounded distribution may waste WAN capacity and expose internal streams.

Question 303

The datacom engineering team at a regional health network during a controlled network cutover reviews this independent fictional networking case: A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. The team applies this remedy: Set an appropriate maximum-prefix threshold and test the negotiated recovery behavior. Which observation would directly demonstrate that this specific issue is resolved?

  1. External route views show the intended prepended announcement and measured ingress path changes when supported
  2. The limit activates predictably in staging and the router protects its route memory during an oversized update
  3. The target instance imports only matching tenant routes and no unrelated VRF routes appear
  4. The best BGP route resolves to a live next hop and data-plane probes succeed after reconvergence

Explanation

Correct Answer

B:

The limit activates predictably in staging and the router protects its route memory during an oversized update. This is a directly observable check for the proposed correction: Set an appropriate maximum-prefix threshold and test the negotiated recovery behavior. The particular failure being investigated is: A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set.

Incorrect Answers

A:

An enterprise wants to influence how some external networks enter its secondary ISP, but it changes local preference inside its own AS instead. External route views show the intended prepended announcement and measured ingress path changes when supported. This observation does not prove the correction for the reported defect: A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale.

C:

Tenant route advertisements reach the EVPN route reflector but are missing from the intended remote virtual instance. The target instance imports only matching tenant routes and no unrelated VRF routes appear. This observation does not prove the correction for the reported defect: A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. Set an appropriate maximum-prefix threshold and test the negotiated recovery behavior.

D:

A BGP-learned route remains visible but is rejected from the forwarding table because its next hop resolves to a failed IGP link. The best BGP route resolves to a live next hop and data-plane probes succeed after reconvergence. This observation does not prove the correction for the reported defect: A provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. An unconstrained update surge can exhaust control-plane capacity and disrupt unrelated services.

Question 304

The datacom engineering team at a municipal emergency dispatch center during a topology consistency review reviews this independent fictional networking case: Guest devices receive an internal employee VLAN after 802.1X authorization results are mapped incorrectly by WLAN policy. The team applies this remedy: Correct NAC authorization attributes and dynamic VLAN/role mapping for each identity category. Which observation would directly demonstrate that this specific issue is resolved?

  1. Spectrum survey and client test show lower channel utilization and higher effective throughput
  2. Controlled mobility tests show successful secure reauthentication with acceptable call interruption
  3. Guest trials land in isolated address space and employees retain intended access
  4. A mobility test keeps the expected address and established application sessions while moving across APs

Explanation

Correct Answer

C:

Guest trials land in isolated address space and employees retain intended access. This is a directly observable check for the proposed correction: Correct NAC authorization attributes and dynamic VLAN/role mapping for each identity category. The particular failure being investigated is: Guest devices receive an internal employee VLAN after 802.1X authorization results are mapped incorrectly by WLAN policy.

Incorrect Answers

A:

When a large lecture hall experiences low Wi-Fi throughput even with strong signal because neighboring AP radios overlap excessively on busy channels, a result such as this is useful: Spectrum survey and client test show lower channel utilization and higher effective throughput. For the reported fault, guest devices receive an internal employee VLAN after 802.1X authorization results are mapped incorrectly by WLAN policy; WLAN access enforcement must combine authenticated identity with the corresponding least-privilege network role.

B:

Voice handsets suffer several seconds of audio interruption after moving between APs because full authentication runs on every transition. Controlled mobility tests show successful secure reauthentication with acceptable call interruption. This observation does not prove the correction for the reported defect: Guest devices receive an internal employee VLAN after 802.1X authorization results are mapped incorrectly by WLAN policy. Correct NAC authorization attributes and dynamic VLAN/role mapping for each identity category.

D:

A client changes IP address during normal intra-campus roaming because neighboring APs anchor it to incompatible service VLANs. A mobility test keeps the expected address and established application sessions while moving across APs. This observation does not prove the correction for the reported defect: Guest devices receive an internal employee VLAN after 802.1X authorization results are mapped incorrectly by WLAN policy. Incorrect access-role mapping can provide guest devices unrestricted internal reachability.

Question 305

The datacom engineering team at an e-commerce fulfillment center while validating change-control evidence reviews this independent fictional networking case: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. A proposed remedy is: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes. Which technical principle most directly supports this remedy?

  1. OSPF shortest-path selection uses cumulative interface cost, not real-time measured bandwidth by itself
  2. Totally stubby configuration suppresses most interarea summaries while retaining the area default route
  3. Aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space
  4. A passive OSPF interface can advertise its prefix without attempting routing adjacencies on that link

Explanation

Correct Answer

C:

Aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space. This directly explains why the corrective operation is appropriate: Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes. The observed acceptance evidence should be: The backbone receives the intended summary and test routes to each component subnet succeed.

Incorrect Answers

A:

OSPF shortest-path selection uses cumulative interface cost, not real-time measured bandwidth by itself. That rule governs a different situation: After an uplink upgrade, OSPF still prefers a slower backup circuit because interface reference bandwidth and explicit cost settings were not reviewed. Here, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. Aggregating interarea advertisements can reduce control-plane state but must not capture unreachable space.

B:

Totally stubby configuration suppresses most interarea summaries while retaining the area default route. That rule governs a different situation: Branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR. Here, several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes.

D:

A user-facing VLAN unnecessarily sends OSPF Hello packets and briefly forms a neighbor with an unauthorized test appliance. A passive OSPF interface can advertise its prefix without attempting routing adjacencies on that link. The current condition differs: Several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied. The backbone receives the intended summary and test routes to each component subnet succeed.

Question 306

The datacom engineering team at a municipal transport operator during a simulated failover test reviews this independent fictional networking case: Two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. Which corrective engineering action most directly addresses this problem?

  1. Use supported BFD or remote path tracking to withdraw the unusable static next hop
  2. Tune BFD intervals and multiplier for supported device and transport capabilities
  3. Correct VRRP group placement and virtual IPv4 address on the intended broadcast domain
  4. Enable supported BFD tracking for the OSPF adjacency and validate timer compatibility

Explanation

Correct Answer

C:

Correct VRRP group placement and virtual IPv4 address on the intended broadcast domain. This is the specific action that addresses the fictional fault: Two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. The governing technical reason is: A VRRP group represents a virtual gateway within a specific local layer-2 segment. Verify by checking: Matching gateway interfaces negotiate one Master and user devices reach the correct virtual address.

Incorrect Answers

A:

A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. This is where using supported BFD or remote path tracking to withdraw the unusable static next hop would help. By contrast, two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. A VRRP group represents a virtual gateway within a specific local layer-2 segment.

B:

A high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling. This is where tuning BFD intervals and multiplier for supported device and transport capabilities would help. By contrast, two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. Correct VRRP group placement and virtual IPv4 address on the intended broadcast domain.

D:

Enabling supported BFD tracking for the OSPF adjacency and validating timer compatibility is relevant when OSPF retains a dead WAN next hop for too long because default neighbor dead timers dominate failure detection. It does not resolve this case: Two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. Matching gateway interfaces negotiate one Master and user devices reach the correct virtual address.

Question 307

The datacom engineering team at an engineering consultancy during a controlled network cutover reviews this independent fictional networking case: An attacker on a user VLAN advertises the gateway's IPv4 address with a forged MAC and steals nearby sessions. Which corrective engineering action most directly addresses this problem?

  1. Deploy appropriate ARP spoofing protection based on trusted bindings and switch capabilities
  2. Align the protected subnet selectors and routing for the authorized tunnel traffic
  3. Restrict protocol peers and apply appropriate routing authentication or control-plane filtering
  4. Restrict management access to approved administrative source networks and enforce strong authentication

Explanation

Correct Answer

A:

Deploy appropriate ARP spoofing protection based on trusted bindings and switch capabilities. This is the specific action that addresses the fictional fault: An attacker on a user VLAN advertises the gateway's IPv4 address with a forged MAC and steals nearby sessions. The governing technical reason is: Layer-2 address validation can prevent untrusted hosts from impersonating a local gateway. Verify by checking: Forged ARP updates are blocked and legitimate ARP resolution continues for approved endpoints.

Incorrect Answers

B:

Two VPN gateways establish IKE but fail to pass the intended private subnet because their phase-two traffic selectors do not agree. This is where aligning the protected subnet selectors and routing for the authorized tunnel traffic would help. By contrast, an attacker on a user VLAN advertises the gateway's IPv4 address with a forged MAC and steals nearby sessions. Layer-2 address validation can prevent untrusted hosts from impersonating a local gateway.

C:

Restricting protocol peers and applying appropriate routing authentication or control-plane filtering is relevant when a provider-facing interface accepts unexpected routing-control connections from an unapproved adjacent host. It does not resolve this case: An attacker on a user VLAN advertises the gateway's IPv4 address with a forged MAC and steals nearby sessions. Deploy appropriate ARP spoofing protection based on trusted bindings and switch capabilities.

D:

A router's SSH management listener is reachable from an untrusted guest subnet after a VLAN redesign. Restricting management access to approved administrative source networks and enforcing strong authentication can respond to that condition, but it would not correct the reported fault: An attacker on a user VLAN advertises the gateway's IPv4 address with a forged MAC and steals nearby sessions. Forged ARP updates are blocked and legitimate ARP resolution continues for approved endpoints.

Question 308

The datacom engineering team at a municipal transport operator during a simulated failover test reviews this independent fictional networking case: A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. The team applies this remedy: Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate. Which observation would directly demonstrate that this specific issue is resolved?

  1. Periodic general queries are seen and switch membership entries remain refreshed
  2. Receivers inside scope join successfully while test receivers outside it receive no multicast payload
  3. The multicast route table reflects an intended source-specific incoming interface and latency improves
  4. The non-listener branch stops receiving the data after valid prune processing

Explanation

Correct Answer

D:

The non-listener branch stops receiving the data after valid prune processing. This is a directly observable check for the proposed correction: Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate. The particular failure being investigated is: A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent.

Incorrect Answers

A:

A VLAN with multicast hosts has no functioning IGMP querier after its original gateway moves away. Periodic general queries are seen and switch membership entries remain refreshed. This observation does not prove the correction for the reported defect: A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. PIM-DM initially floods and then prunes branches without receivers.

B:

A training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade. Receivers inside scope join successfully while test receivers outside it receive no multicast payload. This observation does not prove the correction for the reported defect: A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate.

C:

The multicast route table reflects an intended source-specific incoming interface and latency improves. That result could validate a repair when a distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. Here, a dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent; a missing prune wastes bandwidth across links with no subscribed receivers.

Question 309

The datacom engineering team at a pharmaceutical testing firm after a planned hardware refresh reviews this independent fictional networking case: A branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Control-plane reachability can conceal production packet loss until the forwarding pipeline is verified
  2. Unresolved recursive next hops create a persistent black hole despite syntactically valid configuration
  3. A NAT-only repair can leave return traffic asymmetric and business sessions broken
  4. A stray specific route can silently bypass the preferred security inspection path

Explanation

Correct Answer

D:

A stray specific route can silently bypass the preferred security inspection path. Leaving the exact fault unresolved means: A branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. The intended response is: Compare candidate prefixes and remove the unintended more-specific route before changing global route preferences.

Incorrect Answers

A:

When newly installed routers accept control sessions but transit packets fail because an upstream line card has not finished installing forwarding entries, control-plane reachability can conceal production packet loss until the forwarding pipeline is verified. The present failure is different: A branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. Longest-prefix matching precedes route preference comparisons between routes of different mask lengths.

B:

When a static route is configured to a next-hop address that is absent from the local routing table and never becomes active, unresolved recursive next hops create a persistent black hole despite syntactically valid configuration. The present failure is different: A branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. Compare candidate prefixes and remove the unintended more-specific route before changing global route preferences.

C:

A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. In that situation, a NAT-only repair can leave return traffic asymmetric and business sessions broken. Here instead, a branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. The routing table and packet-path trace select the intended prefix and next hop.

Question 310

The datacom engineering team at a university hospital during a network security audit reviews this independent fictional networking case: A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. A proposed remedy is: Use supported BFD or remote path tracking to withdraw the unusable static next hop. Which technical principle most directly supports this remedy?

  1. Physical interface state alone cannot detect all remote next-hop failures
  2. VRRP Master election is priority based subject to ownership and preemption rules
  3. A VRRP group represents a virtual gateway within a specific local layer-2 segment
  4. BFD session state depends on interoperable mode and timing negotiation between peers

Explanation

Correct Answer

A:

Physical interface state alone cannot detect all remote next-hop failures. This directly explains why the corrective operation is appropriate: Use supported BFD or remote path tracking to withdraw the unusable static next hop. The observed acceptance evidence should be: An injected upstream failure withdraws the primary route and backup traffic succeeds.

Incorrect Answers

B:

VRRP Master election is priority based subject to ownership and preemption rules. That rule governs a different situation: A backup gateway becomes VRRP Master after an unrelated restart despite the primary router being healthy. Here, a static backup path remains inactive while the primary next hop fails beyond a locally Up interface. Physical interface state alone cannot detect all remote next-hop failures.

C:

Two gateway routers advertise the same virtual router ID on different VLANs due to a template copy error. A VRRP group represents a virtual gateway within a specific local layer-2 segment. The current condition differs: A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. Use supported BFD or remote path tracking to withdraw the unusable static next hop.

D:

When two vendors' routers never bring BFD Up because one side uses unsupported or incompatible negotiated timing behavior, BFD session state depends on interoperable mode and timing negotiation between peers. By contrast, a static backup path remains inactive while the primary next hop fails beyond a locally Up interface; an injected upstream failure withdraws the primary route and backup traffic succeeds.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests