McAfee Secured

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

100% Huawei H12-821 Guaranteed Success With Testking Training Materials

Get Real H12-821 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 30

Question 290

The datacom engineering team at a maritime terminal after a monitored link change reviews this independent fictional networking case: Tenant route advertisements reach the EVPN route reflector but are missing from the intended remote virtual instance. A proposed remedy is: Correct matching export and import route-target policy for the tenant instance. Which technical principle most directly supports this remedy?

  1. EVPN route targets control which VPN routes a receiving instance is permitted to import
  2. BGP runs over TCP and needs successful IP transport to its configured peer endpoint
  3. Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale
  4. MED is a suggestion about preferred entry into a neighboring AS and its comparison is policy dependent

Explanation

Correct Answer

A:

EVPN route targets control which VPN routes a receiving instance is permitted to import. This directly explains why the corrective operation is appropriate: Correct matching export and import route-target policy for the tenant instance. The observed acceptance evidence should be: The target instance imports only matching tenant routes and no unrelated VRF routes appear.

Incorrect Answers

B:

When a BGP session never reaches TCP Established because the peer address is not reachable in the underlay routing table, BGP runs over TCP and needs successful IP transport to its configured peer endpoint. By contrast, tenant route advertisements reach the EVPN route reflector but are missing from the intended remote virtual instance; EVPN route targets control which VPN routes a receiving instance is permitted to import.

C:

Prefix-limit controls can bound routing state growth when a neighbor violates expected route scale. That principle is relevant when a provider mistakenly sends a full Internet table to an edge peer designed for a small managed route set. Here, tenant route advertisements reach the EVPN route reflector but are missing from the intended remote virtual instance; correct matching export and import route-target policy for the tenant instance.

D:

MED is a suggestion about preferred entry into a neighboring AS and its comparison is policy dependent. That rule governs a different situation: Two routes from the same upstream AS choose an undesired interconnect because MED values are not consistently planned. Here, tenant route advertisements reach the EVPN route reflector but are missing from the intended remote virtual instance. The target instance imports only matching tenant routes and no unrelated VRF routes appear.

Question 291

The datacom engineering team at a wholesale market association while tracing a degraded application flow reviews this independent fictional networking case: Two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. A proposed remedy is: Reestablish a contiguous backbone design and use any supported temporary virtual link only with documented constraints. Which technical principle most directly supports this remedy?

  1. A passive OSPF interface can advertise its prefix without attempting routing adjacencies on that link
  2. OSPF interarea routing depends on backbone connectivity through area 0
  3. An OSPF neighbor pair must agree on the area identity for the common link
  4. MTU incompatibility can disrupt OSPF database description negotiation and leave neighbors partially adjacent

Explanation

Correct Answer

B:

OSPF interarea routing depends on backbone connectivity through area 0. This directly explains why the corrective operation is appropriate: Reestablish a contiguous backbone design and use any supported temporary virtual link only with documented constraints. The observed acceptance evidence should be: ABRs display correct backbone reachability and previously missing interarea routes appear.

Incorrect Answers

A:

A user-facing VLAN unnecessarily sends OSPF Hello packets and briefly forms a neighbor with an unauthorized test appliance. A passive OSPF interface can advertise its prefix without attempting routing adjacencies on that link. The current condition differs: Two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. OSPF interarea routing depends on backbone connectivity through area 0.

C:

An OSPF neighbor pair must agree on the area identity for the common link. That rule governs a different situation: Two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10. Here, two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. Reestablish a contiguous backbone design and use any supported temporary virtual link only with documented constraints.

D:

MTU incompatibility can disrupt OSPF database description negotiation and leave neighbors partially adjacent. That rule governs a different situation: OSPF neighbors repeatedly stall in ExStart or Exchange after a tunnel MTU change. Here, two nonbackbone OSPF areas were connected without a valid area 0 path and interarea routes are inconsistent. ABRs display correct backbone reachability and previously missing interarea routes appear.

Question 292

The datacom engineering team at a retail banking network as part of an acceptance test reviews this independent fictional networking case: A BGP session never reaches TCP Established because the peer address is not reachable in the underlay routing table. A proposed remedy is: Restore transport IP reachability to the neighbor before changing BGP route policies. Which technical principle most directly supports this remedy?

  1. BGP neighbor identity must align with the configured source and destination transport addresses
  2. BGP runs over TCP and needs successful IP transport to its configured peer endpoint
  3. A base BGP TCP session does not imply that every MP-BGP address family is negotiated and active
  4. Route reflection loop-prevention attributes prevent readvertising a route into a cycle

Explanation

Correct Answer

B:

BGP runs over TCP and needs successful IP transport to its configured peer endpoint. This directly explains why the corrective operation is appropriate: Restore transport IP reachability to the neighbor before changing BGP route policies. The observed acceptance evidence should be: TCP port 179 connectivity works and the peer progresses to Established.

Incorrect Answers

A:

Two iBGP speakers configured with loopback neighbor addresses send sessions from unexpected physical interface addresses. BGP neighbor identity must align with the configured source and destination transport addresses. The current condition differs: A BGP session never reaches TCP Established because the peer address is not reachable in the underlay routing table. BGP runs over TCP and needs successful IP transport to its configured peer endpoint.

C:

When an EVPN BGP session is Established for IPv4 unicast, yet the remote leaf receives no EVPN control-plane routes, a base BGP TCP session does not imply that every MP-BGP address family is negotiated and active. By contrast, a BGP session never reaches TCP Established because the peer address is not reachable in the underlay routing table; restore transport IP reachability to the neighbor before changing BGP route policies.

D:

Route reflection loop-prevention attributes prevent readvertising a route into a cycle. That rule governs a different situation: An iBGP route reflected through overlapping clusters returns toward its originator unexpectedly. Here, a BGP session never reaches TCP Established because the peer address is not reachable in the underlay routing table. TCP port 179 connectivity works and the peer progresses to Established.

Question 293

The datacom engineering team at a university research campus while tracing a degraded application flow reviews this independent fictional networking case: A VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Local gateway survival without uplink tracking can blackhole an entire user VLAN
  2. Unplanned Master placement may steer client traffic over a less reliable exit
  3. Oversensitive BFD can cause route flapping on healthy circuits
  4. An unverified BFD session provides no rapid failure protection to the routing design

Explanation

Correct Answer

A:

Local gateway survival without uplink tracking can blackhole an entire user VLAN. Leaving the exact fault unresolved means: A VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational. The intended response is: Track external-uplink health and reduce VRRP priority enough for the healthy backup to take over.

Incorrect Answers

B:

When a backup gateway becomes VRRP Master after an unrelated restart despite the primary router being healthy, unplanned Master placement may steer client traffic over a less reliable exit. The present failure is different: A VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational. Virtual gateway availability must account for upstream path health, not just local gateway interface state.

C:

Oversensitive BFD can cause route flapping on healthy circuits. That consequence could follow when a high-load device repeatedly declares a healthy BFD session Down because its interval/multiplier settings are too aggressive for platform scheduling. Here, a VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational; track external-uplink health and reduce VRRP priority enough for the healthy backup to take over.

D:

An unverified BFD session provides no rapid failure protection to the routing design. That consequence could follow when two vendors' routers never bring BFD Up because one side uses unsupported or incompatible negotiated timing behavior. Here, a VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational; primary uplink failure transfers Master to the router with valid outbound reachability.

Question 294

The datacom engineering team at a municipal emergency dispatch center during a topology consistency review reviews this independent fictional networking case: An administrator adds broad reverse-direction allow rules to fix response packets that should already match a healthy established session. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Overly broad reverse policy expands access while hiding the real session or routing fault
  2. A NAT-only repair can leave return traffic asymmetric and business sessions broken
  3. Unrestricted management access increases credential-attack surface and potential device compromise
  4. Improper routing-instance assignment can expose one customer's traffic to another

Explanation

Correct Answer

A:

Overly broad reverse policy expands access while hiding the real session or routing fault. Leaving the exact fault unresolved means: An administrator adds broad reverse-direction allow rules to fix response packets that should already match a healthy established session. The intended response is: Diagnose session creation and asymmetric paths instead of opening unrestricted reverse policies.

Incorrect Answers

B:

A NAT-only repair can leave return traffic asymmetric and business sessions broken. That risk belongs to a separate condition: A firewall's translated address leaves through the wrong outbound interface because the post-translation route lookup points to an unexpected gateway. Here, an administrator adds broad reverse-direction allow rules to fix response packets that should already match a healthy established session; stateful session tracking can permit legitimate return traffic according to an established flow's state.

C:

Unrestricted management access increases credential-attack surface and potential device compromise. That consequence could follow when a router's SSH management listener is reachable from an untrusted guest subnet after a VLAN redesign. Here, an administrator adds broad reverse-direction allow rules to fix response packets that should already match a healthy established session; diagnose session creation and asymmetric paths instead of opening unrestricted reverse policies.

D:

When traffic from two tenants reaches each other after an access service is mistakenly placed in a shared routing instance, improper routing-instance assignment can expose one customer's traffic to another. The present failure is different: An administrator adds broad reverse-direction allow rules to fix response packets that should already match a healthy established session. Session state is present for the initiator and replies pass without extra broad allow rules.

Question 295

The datacom engineering team at a local rail transit network while validating change-control evidence reviews this independent fictional networking case: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. The team applies this remedy: Constrain ge/le mask-length ranges and test boundary prefix acceptance. Which observation would directly demonstrate that this specific issue is resolved?

  1. The BGP advertisement list excludes internal infrastructure prefixes while approved service routes remain
  2. Matched-rule counters and received-route sets show only intended prefixes accepted
  3. Bidirectional trace confirms both directions traverse a consistent stateful inspection path
  4. Tests accept the approved /24 and reject longer unauthorized prefixes

Explanation

Correct Answer

D:

Tests accept the approved /24 and reject longer unauthorized prefixes. This is a directly observable check for the proposed correction: Constrain ge/le mask-length ranges and test boundary prefix acceptance. The particular failure being investigated is: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes.

Incorrect Answers

A:

The BGP advertisement list excludes internal infrastructure prefixes while approved service routes remain. This check belongs to a border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution. The actual defect is different: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. A prefix-list entry's address and mask-length matching must both reflect the authorization boundary.

B:

Matched-rule counters and received-route sets show only intended prefixes accepted. This check belongs to a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. The actual defect is different: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Constrain ge/le mask-length ranges and test boundary prefix acceptance.

C:

A stateful firewall intermittently drops responses after equal-cost routing spreads the forward and return flows across unrelated inspection nodes. Bidirectional trace confirms both directions traverse a consistent stateful inspection path. This observation does not prove the correction for the reported defect: A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. An overbroad mask range can enable unauthorized deaggregation and route leaks.

Question 296

The datacom engineering team at a university hospital during a network security audit reviews this independent fictional networking case: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Which corrective engineering action most directly addresses this problem?

  1. Tag redistributed routes and deny re-entry of the marked route class at the opposite redistribution point
  2. Restore symmetric service-chain routing or a supported state-sharing design
  3. Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny
  4. Constrain ge/le mask-length ranges and test boundary prefix acceptance

Explanation

Correct Answer

C:

Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny. This is the specific action that addresses the fictional fault: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. The governing technical reason is: Sequential route-policy matches can terminate evaluation and make later rules unreachable. Verify by checking: Matched-rule counters and received-route sets show only intended prefixes accepted.

Incorrect Answers

A:

Tagging redistributed routes and deny re-entry of the marked route class at the opposite redistribution point is relevant when two redistribution points repeatedly re-inject learned routes between OSPF and another IGP and churn route entries. It does not resolve this case: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Sequential route-policy matches can terminate evaluation and make later rules unreachable.

B:

A stateful firewall intermittently drops responses after equal-cost routing spreads the forward and return flows across unrelated inspection nodes. This is where restoring symmetric service-chain routing or a supported state-sharing design would help. By contrast, a new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny.

D:

A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Constraining ge/le mask-length ranges and testing boundary prefix acceptance can respond to that condition, but it would not correct the reported fault: A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Matched-rule counters and received-route sets show only intended prefixes accepted.

Question 297

The datacom engineering team at a regional telecommunications carrier during a controlled network cutover reviews this independent fictional networking case: A growing datacenter iBGP full mesh becomes operationally difficult and newly added peers lack complete route distribution. A proposed remedy is: Introduce a correctly designed iBGP route reflector cluster with appropriate clients and redundancy. Which technical principle most directly supports this remedy?

  1. Route reflection replaces full-mesh iBGP peering while preserving loop-prevention attributes
  2. Route distinguishers distinguish otherwise identical VPN address advertisements; they do not themselves control import permission
  3. MED is a suggestion about preferred entry into a neighboring AS and its comparison is policy dependent
  4. AS_PATH attributes can influence external path selection but cannot guarantee behavior against other operators' policies

Explanation

Correct Answer

A:

Route reflection replaces full-mesh iBGP peering while preserving loop-prevention attributes. This directly explains why the corrective operation is appropriate: Introduce a correctly designed iBGP route reflector cluster with appropriate clients and redundancy. The observed acceptance evidence should be: All clients learn the intended prefixes and remain connected after a reflector failover.

Incorrect Answers

B:

Route distinguishers distinguish otherwise identical VPN address advertisements; they do not themselves control import permission. That principle is relevant when two EVPN leaf devices originate indistinguishable VPN NLRI because the service route identifiers were copied incorrectly. Here, a growing datacenter iBGP full mesh becomes operationally difficult and newly added peers lack complete route distribution; route reflection replaces full-mesh iBGP peering while preserving loop-prevention attributes.

C:

Two routes from the same upstream AS choose an undesired interconnect because MED values are not consistently planned. MED is a suggestion about preferred entry into a neighboring AS and its comparison is policy dependent. The current condition differs: A growing datacenter iBGP full mesh becomes operationally difficult and newly added peers lack complete route distribution. Introduce a correctly designed iBGP route reflector cluster with appropriate clients and redundancy.

D:

AS_PATH attributes can influence external path selection but cannot guarantee behavior against other operators' policies. That principle is relevant when an enterprise wants to influence how some external networks enter its secondary ISP, but it changes local preference inside its own AS instead. Here, a growing datacenter iBGP full mesh becomes operationally difficult and newly added peers lack complete route distribution; all clients learn the intended prefixes and remain connected after a reflector failover.

Question 298

The datacom engineering team at a warehouse automation provider during a topology consistency review reviews this independent fictional networking case: Two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10. Which corrective engineering action most directly addresses this problem?

  1. Set OSPF interface priorities to favor a stable distribution router and perform a planned election transition
  2. Introduce an accurate ABR area range after verifying all component prefixes and forwarding outcomes
  3. Correct the interface area assignment after confirming the intended area boundary
  4. Apply appropriately scoped external prefix summarization at the originating ASBR

Explanation

Correct Answer

C:

Correct the interface area assignment after confirming the intended area boundary. This is the specific action that addresses the fictional fault: Two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10. The governing technical reason is: An OSPF neighbor pair must agree on the area identity for the common link. Verify by checking: Neighbor state reaches Full and the link appears in both area LSDB views.

Incorrect Answers

A:

A shared broadcast VLAN has an unsuitable router elected as Designated Router, causing unnecessary control-plane dependence on an access-edge node. Setting OSPF interface priorities to favor a stable distribution router and performing a planned election transition can respond to that condition, but it would not correct the reported fault: Two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10. An OSPF neighbor pair must agree on the area identity for the common link.

B:

When several closely related access prefixes create unnecessary interarea LSA churn because no ABR aggregation is applied, introducing an accurate ABR area range after verifying all component prefixes and forwarding outcomes could be appropriate. Here, two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10. Correct the interface area assignment after confirming the intended area boundary.

D:

An ASBR emits hundreds of connected external prefixes individually and overwhelms branch route tables. This is where applying appropriately scoped external prefix summarization at the originating ASBR would help. By contrast, two routers on the same Ethernet segment remain stuck without OSPF adjacency because one interface belongs to area 0 and the other to area 10. Neighbor state reaches Full and the link appears in both area LSDB views.

Question 299

The datacom engineering team at a call center outsourcer after a planned hardware refresh reviews this independent fictional networking case: Two replacement servers are configured with the same IPv6 address and one fails to bring the address online. The team applies this remedy: Resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior. Which observation would directly demonstrate that this specific issue is resolved?

  1. The route installs with the expected interface and reachability probes succeed
  2. Clients form valid unique global addresses and default routes from the expected RA source
  3. Traces avoid the recovering node until readiness and return afterward without loss
  4. The conflicting address is removed and DAD completes without duplicate notifications

Explanation

Correct Answer

D:

The conflicting address is removed and DAD completes without duplicate notifications. This is a directly observable check for the proposed correction: Resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior. The particular failure being investigated is: Two replacement servers are configured with the same IPv6 address and one fails to bring the address online.

Incorrect Answers

A:

When an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly, a result such as this is useful: The route installs with the expected interface and reachability probes succeed. For the reported fault, two replacement servers are configured with the same IPv6 address and one fails to bring the address online; IPv6 DAD uses neighbor solicitation to detect duplicate addresses before regular use.

B:

Clients form valid unique global addresses and default routes from the expected RA source. This check belongs to clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. The actual defect is different: Two replacement servers are configured with the same IPv6 address and one fails to bring the address online. Resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior.

C:

Traces avoid the recovering node until readiness and return afterward without loss. That result could validate a repair when a router recovering from reboot begins attracting transit traffic before its route state is ready. Here, two replacement servers are configured with the same IPv6 address and one fails to bring the address online; duplicate IPv6 addresses create intermittent black holes and service identity confusion.

Question 300

The datacom engineering team at an airport facilities team while tracing a degraded application flow reviews this independent fictional networking case: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. Which corrective engineering action most directly addresses this problem?

  1. Validate PIM-SM source-specific shortest-path switching and the unicast route toward the source
  2. Verify the multicast RPF route and correct source reachability or appropriate multicast routing state
  3. Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate
  4. Enable and validate snooping with an operative querier and approved multicast router ports

Explanation

Correct Answer

A:

Validate PIM-SM source-specific shortest-path switching and the unicast route toward the source. This is the specific action that addresses the fictional fault: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. The governing technical reason is: PIM-SM can transition from a shared tree to a source-specific tree when route and policy permit. Verify by checking: The multicast route table reflects an intended source-specific incoming interface and latency improves.

Incorrect Answers

B:

A multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. Verifying the multicast RPF route and correcting source reachability or appropriate multicast routing state can respond to that condition, but it would not correct the reported fault: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. PIM-SM can transition from a shared tree to a source-specific tree when route and policy permit.

C:

A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. This is where investigating PIM-DM neighbor/prune behavior and removing unnecessary dense-mode flooding where appropriate would help. By contrast, a distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. Validate PIM-SM source-specific shortest-path switching and the unicast route toward the source.

D:

Enabling and validating snooping with an operative querier and approved multicast router ports is relevant when a switch floods a high-rate multicast feed to all access ports because no reliable IGMP snooping membership table was built. It does not resolve this case: A distant receiver continues using a long shared tree after a short direct source path is available and capacity is strained. The multicast route table reflects an intended source-specific incoming interface and latency improves.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests