Question 960 An LCD appears fuzzy and text has colored fringes because the output resolution does not match the panel's native pixel grid. Which prediction follows from this particular failure mode? Cropping or distortion can come from scaling settings rather than a broken panel Interpolating pixels can soften text even if the panel hardware is healthy A successful video signal does not automatically change the application's audio output A simple reboot cannot always reverse permanent differential OLED aging Explanation Correct Answer B:The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution. Incorrect Answers A:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch. C:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output. D:The ghost pattern remains visible after changing input content and matches long-running static UI elements, consistent with an oled persistent image burn-in.
Question 961 When documenting this incident, a technician notes: An OLED information panel shows faint permanent navigation icons after a static dashboard was displayed continuously for months. Which limitation is most directly relevant? Changing graphics drivers cannot repair an electrically failed pixel Interpolating pixels can soften text even if the panel hardware is healthy An unsupported high-bandwidth signal can fail despite a working monitor at lower rates A simple reboot cannot always reverse permanent differential OLED aging Explanation Correct Answer D:The ghost pattern remains visible after changing input content and matches long-running static UI elements, consistent with an oled persistent image burn-in. Incorrect Answers A:A solid-color test pattern consistently shows one pixel failing to illuminate, consistent with a dead pixel in the display matrix. B:The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution. C:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode.
Question 962 A monitor flickers only when a high refresh option is selected with a long, marginal video cable. Which risk or behavior would be expected if a superficially attractive but incorrect workaround were used? A digital GPU color profile adjustment will not restore an absent physical color conductor Changing operating-system font size cannot repair an intermittent video conductor A successful video signal does not automatically change the application's audio output An unsupported high-bandwidth signal can fail despite a working monitor at lower rates Explanation Correct Answer D:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode. Incorrect Answers A:A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable. B:Moving the cable triggers signal loss and a known-good cable restores a stable display, consistent with a loose or damaged video cable. C:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output.
Question 963 In a post-repair discussion, the team reviews: A conference-room PC sends presentation video to the projector, but sound continues from the PC speakers rather than the projector. Which technical implication should be highlighted? An unsupported high-bandwidth signal can fail despite a working monitor at lower rates Cropping or distortion can come from scaling settings rather than a broken panel A successful video signal does not automatically change the application's audio output Replacing a functioning bulb cannot make a projector listen to the correct input Explanation Correct Answer C:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output. Incorrect Answers A:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode. B:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch. D:The live cable terminates at HDMI 1 while the projector is listening to HDMI 2, consistent with a projector input source selected incorrectly.
Question 964 A projector crops the right side of a wide presentation because its configured aspect ratio does not match the laptop output. Which technical consequence or limitation best explains why the problem matters? Cropping or distortion can come from scaling settings rather than a broken panel A successful video signal does not automatically change the application's audio output Interpolating pixels can soften text even if the panel hardware is healthy Changing graphics drivers cannot repair an electrically failed pixel Explanation Correct Answer A:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch. Incorrect Answers B:The OS lists the HDMI audio endpoint but the default playback device remains local speakers, consistent with an audio playback device not selected for hdmi output. C:The GPU output resolution differs from the display's stated native resolution, consistent with a lcd scaling at non-native resolution. D:A solid-color test pattern consistently shows one pixel failing to illuminate, consistent with a dead pixel in the display matrix.
Question 965 A user asks what may happen if the issue is not correctly handled: A monitor shows one permanently black pixel at the same location across all applications and input sources. Which outcome is best supported? Cropping or distortion can come from scaling settings rather than a broken panel A digital GPU color profile adjustment will not restore an absent physical color conductor An unsupported high-bandwidth signal can fail despite a working monitor at lower rates Changing graphics drivers cannot repair an electrically failed pixel Explanation Correct Answer D:A solid-color test pattern consistently shows one pixel failing to illuminate, consistent with a dead pixel in the display matrix. Incorrect Answers A:The laptop sends widescreen output while the projector is locked to a different aspect mode, consistent with a display aspect-ratio mismatch. B:A bent or damaged VGA connector pin prevents one analog color signal from reaching the monitor, consistent with a missing analog color channel in vga cable. C:Flicker stops at a lower supported refresh rate and returns with the high-bandwidth setting, consistent with an insufficient video link bandwidth for selected mode.
Question 966 A phone's back glass has separated and a swollen internal battery can be seen beneath the enclosure. Which prediction follows from this particular failure mode? Puncturing or compressing a swollen lithium battery can lead to thermal runaway Loose adhesive does not itself demonstrate hazardous cell expansion Impact-related housing deformation may occur without the chemical risk of a swollen battery A loose receptacle interrupts charging but does not generally bulge the battery compartment Explanation Correct Answer A:The device's housing has bowed outward independently of software or charger settings, consistent with a mobile battery swelling and safety hazard. Incorrect Answers B:The adhesive holding the back glass has detached but the battery is visually flat and undamaged, consistent with a broken enclosure adhesive without battery deformation. C:The casing is distorted at the impact corner and the battery has no visible or measured swelling, consistent with a bent phone chassis after impact. D:The back housing is intact while the charge port shifts under cable insertion, consistent with a charging connector mechanically loosened.
Question 967 When documenting this incident, a technician notes: A tablet was splashed with a drink; it still powers up but begins showing corrosion around the charge connector. Which limitation is most directly relevant? Higher-rated charging is negotiated; a physically compatible plug alone does not ensure the requested rate Continuing to charge while moisture remains can cause short circuits and additional corrosion Replacing the wall charger will not fix a loose connector that loses electrical contact Replacing a good LCD panel alone may not correct inaccurate touch sensing Explanation Correct Answer B:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage. Incorrect Answers A:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. C:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port. D:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue.
Question 968 A phone only charges when its USB-C connector is held at an angle, and several known-good chargers behave the same way. Which risk or behavior would be expected if a superficially attractive but incorrect workaround were used? Replacing the wall charger will not fix a loose connector that loses electrical contact Higher-rated charging is negotiated; a physically compatible plug alone does not ensure the requested rate Continuing to charge while moisture remains can cause short circuits and additional corrosion Reinstalling an unrelated app cannot improve weak received wireless power Explanation Correct Answer A:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port. Incorrect Answers B:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. C:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage. D:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue.
Question 969 In a post-repair discussion, the team reviews: A tablet charges slowly through a low-power adapter even though its specified fast-charge power profile is supported by a newer charger. Which technical implication should be highlighted? Continuing to charge while moisture remains can cause short circuits and additional corrosion A functioning touch panel does not guarantee an active pen has sufficient power Higher-rated charging is negotiated; a physically compatible plug alone does not ensure the requested rate Replacing the wall charger will not fix a loose connector that loses electrical contact Explanation Correct Answer C:The charger advertises less power than the tablet requires for supported fast charging, consistent with a charger power-delivery negotiation mismatch. Incorrect Answers A:Moisture indicators are activated and conductive residue is visible at the connector, consistent with a liquid ingress and corrosion damage. B:The stylus charge is depleted or its nib is worn while capacitive finger input works normally, consistent with an active stylus tip or battery fault. D:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port.
Question 970 A phone connects to the same home Wi-Fi as other devices but loses Internet intermittently whenever it moves away from the access point. Which technical consequence or limitation best explains why the problem matters? Replacing a good LCD panel alone may not correct inaccurate touch sensing Replacing the wall charger will not fix a loose connector that loses electrical contact A healthy battery or screen does not rule out software-origin compromise Reinstalling an unrelated app cannot improve weak received wireless power Explanation Correct Answer D:The phone's signal level falls sharply with distance while nearby devices on the AP remain stable, consistent with a weak mobile wi-fi signal or antenna issue. Incorrect Answers A:A touch test grid shows systematic coordinate offset while the LCD image itself is correctly aligned, consistent with a touch digitizer coordinate calibration issue. B:Visual inspection finds debris or mechanical damage in the receptacle while the cables test good, consistent with a worn or obstructed phone charging port. C:The questionable app has unusual permissions and its network activity aligns with the symptoms, consistent with a potentially malicious mobile application.