Question 790 A department's laser printer shows black specks scattered over clean white areas on multiple test pages after a toner spill. Which failure mode should the technician prioritize? Depleted color toner cartridge Loose toner or contaminated laser print path Printer network reachability or allowed ports blocked Stapler finisher mechanism jam Explanation Correct Answer B:Speckling persists across different documents and visible loose toner is present in the device, consistent with a loose toner or contaminated laser print path. Incorrect Answers A:The device's toner status and controlled test pages show one color missing across all clients, consistent with a depleted color toner cartridge. C:A local test page succeeds while authorized clients cannot reach the printer's configured IP or print service, consistent with a printer network reachability or allowed ports blocked. D:The printer can produce un-stapled output while the stapling unit shows an obstruction, consistent with a stapler finisher mechanism jam.
Question 791 To avoid replacing the wrong part, a technician reviews the issue: A desktop turns off abruptly during 3D rendering but runs office applications, and a power monitor shows the graphics workload exceeding the current supply's reliable output. Which verification is the most discriminating? Memory stress tests fail with aggressive timings while PSU readings stay inside the rated capacity The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature CPU temperature reaches the thermal protection threshold before shutdown even when PSU power is sufficient The graphics driver records a reset event and the system continues running instead of abruptly losing power Explanation Correct Answer B:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. Incorrect Answers A:Memory stress tests fail with aggressive timings while PSU readings stay inside the rated capacity, consistent with an unstable memory xmp profile. C:CPU temperature reaches the thermal protection threshold before shutdown even when PSU power is sufficient, consistent with a cpu thermal shutdown under sustained compute. D:The graphics driver records a reset event and the system continues running instead of abruptly losing power, consistent with a gpu graphics driver timeout.
Question 792 A technician has a tentative diagnosis for this incident: A PC sounds a repeated memory-related POST beep pattern after being moved, and the display never shows firmware setup. Which test result would support it most directly? The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS The motherboard's documented beep code identifies RAM and inspection finds a DIMM latch not fully closed The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output Explanation Correct Answer C:The motherboard's documented beep code identifies RAM and inspection finds a DIMM latch not fully closed, consistent with a memory module unseated after transport. Incorrect Answers A:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. B:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. D:The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output, consistent with a display output routed to wrong graphics port.
Question 793 A workstation slows and then powers off during extended compiling, with CPU temperature reaching the hardware protection limit. Which evidence distinguishes the likely cause from other issues in the same technical area? Firmware settings reset only when wall power is removed and the RTC cell voltage measures low The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM The heatsink fan is stopped and temperature climbs rapidly before the slowdown Explanation Correct Answer D:The heatsink fan is stopped and temperature climbs rapidly before the slowdown, consistent with a cpu thermal throttling from failed cooling. Incorrect Answers A:Firmware settings reset only when wall power is removed and the RTC cell voltage measures low, consistent with a depleted cmos/rtc battery. B:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load. C:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling.
Question 794 Before repairing this fault, the service desk wants reproducible evidence: A powered-off desktop repeatedly loses the date and firmware boot order between unplugged sessions, although it starts normally after configuration. Which finding is most relevant? Fan speed rises while internal temperature continues increasing and dust blocks the intake The heatsink fan is stopped and temperature climbs rapidly before the slowdown Firmware settings reset only when wall power is removed and the RTC cell voltage measures low CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM Explanation Correct Answer C:Firmware settings reset only when wall power is removed and the RTC cell voltage measures low, consistent with a depleted cmos/rtc battery. Incorrect Answers A:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow. B:The heatsink fan is stopped and temperature climbs rapidly before the slowdown, consistent with a cpu thermal throttling from failed cooling. D:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling.
Question 795 To avoid replacing the wrong part, a technician reviews the issue: An aging tower sometimes refuses to start and the motherboard contains electrolytic capacitors with bulging tops and residue. Which verification is the most discriminating? Restarts correlate with GPU load transients while thermals remain within safe limits A visual inspection with AC power disconnected finds swollen or leaking capacitors near the voltage regulators A known-good power cord and wall outlet deliver power but the PSU fails safe output tests A memory diagnostic fails only with the aggressive shared timing profile enabled Explanation Correct Answer B:A visual inspection with AC power disconnected finds swollen or leaking capacitors near the voltage regulators, consistent with a damaged motherboard capacitors. Incorrect Answers A:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. C:A known-good power cord and wall outlet deliver power but the PSU fails safe output tests, consistent with a failed or disconnected power supply. D:A memory diagnostic fails only with the aggressive shared timing profile enabled, consistent with an unstable combined ram profile.
Question 796 A technician has a tentative diagnosis for this incident: A desktop has no fan spin and no standby LED after a storm, although the wall socket tests good with another device. Which test result would support it most directly? A known-good power cord and wall outlet deliver power but the PSU fails safe output tests Restarts correlate with GPU load transients while thermals remain within safe limits Fan speed rises while internal temperature continues increasing and dust blocks the intake The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature Explanation Correct Answer A:A known-good power cord and wall outlet deliver power but the PSU fails safe output tests, consistent with a failed or disconnected power supply. Incorrect Answers B:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. C:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow. D:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load.
Question 797 A PC restarts only when a new graphics card enters its highest performance state, and a wattmeter shows brief load spikes above the supply's rating. Which evidence distinguishes the likely cause from other issues in the same technical area? Restarts correlate with GPU load transients while thermals remain within safe limits The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output A known-good power cord and wall outlet deliver power but the PSU fails safe output tests The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature Explanation Correct Answer A:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. Incorrect Answers B:The active video signal comes from the discrete card while the monitor is connected to an inactive motherboard output, consistent with a display output routed to wrong graphics port. C:A known-good power cord and wall outlet deliver power but the PSU fails safe output tests, consistent with a failed or disconnected power supply. D:The shutdown coincides with combined CPU and GPU power demand rather than rising component temperature, consistent with a power supply capacity inadequate under load.
Question 798 Before repairing this fault, the service desk wants reproducible evidence: A home computer displays random blue screens after a new memory kit was added; each stick works alone but both fail together at overclocked timing. Which finding is most relevant? A memory diagnostic fails only with the aggressive shared timing profile enabled The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS Restarts correlate with GPU load transients while thermals remain within safe limits CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM Explanation Correct Answer A:A memory diagnostic fails only with the aggressive shared timing profile enabled, consistent with an unstable combined ram profile. Incorrect Answers B:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. C:Restarts correlate with GPU load transients while thermals remain within safe limits, consistent with a power supply transient response or headroom shortfall. D:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling.
Question 799 After receiving the ticket, a senior technician asks: A small desktop repeatedly powers off on hot days; its intake vents and fan blades are covered with thick dust. Which observation provides the best confirmation? CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum Firmware settings reset only when wall power is removed and the RTC cell voltage measures low Fan speed rises while internal temperature continues increasing and dust blocks the intake Explanation Correct Answer D:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow. Incorrect Answers A:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling. B:The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum, consistent with a failing fan bearing in cooling assembly. C:Firmware settings reset only when wall power is removed and the RTC cell voltage measures low, consistent with a depleted cmos/rtc battery.
Question 800 A server's fan makes a grinding sound and CPU temperatures climb even when the case filters are clean. Which additional observation would most strongly corroborate the suspected cause? The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS Fan speed rises while internal temperature continues increasing and dust blocks the intake CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM Explanation Correct Answer A:The fan rotor wobbles or intermittently stalls and its RPM falls below the specified minimum, consistent with a failing fan bearing in cooling assembly. Incorrect Answers B:The motherboard beep code and CPU support list indicate the processor requires a newer supported BIOS, consistent with an unsupported cpu or firmware initialization failure. C:Fan speed rises while internal temperature continues increasing and dust blocks the intake, consistent with an overheating caused by obstructed airflow. D:CPU temperature and clock monitoring show thermal limits reached while the fan remains at low RPM, consistent with a firmware cooling policy causing cpu throttling.