Question 120A network operations script prints its Cisco API bearer token in debug logs during device inventory collection. What should be institutionalized before future deployments? Use scoped expiring credentials and automated secret-scanning for all orchestration scripts. Centralize retry policy, quotas and unique request IDs for API clients. Use reusable paginated clients and tests against multi-page mock responses. Document multiple independent preventive and detective controls for each critical service path. ExplanationCorrect Answer A:Use scoped expiring credentials and automated secret-scanning for all orchestration scripts. This safeguard limits repeat failures because a bearer token grants authority to whoever possesses it, regardless of transport encryption after disclosure. The direct correction remains: Move tokens to a protected secret store, redact them from logs and revoke the exposed credential. Other Answers B:HTTP 429 indicates rate limiting; tight retries amplify load and can duplicate modifying operations. Reducing this risk requires a practice to use scoped expiring credentials and automated secret-scanning for all orchestration scripts. C:REST API listing results can be paginated, so one successful HTTP 200 response may be only a partial dataset. Reducing this risk requires a practice to use scoped expiring credentials and automated secret-scanning for all orchestration scripts. D:Defense in depth limits the impact when one protection layer fails or is bypassed. The lasting safeguard is to use scoped expiring credentials and automated secret-scanning for all orchestration scripts.
Question 121A bank's branch IPS sees the first malicious packet but detects it only after the passive span-port copy arrives. What should the engineer change first to meet these conditions? Place inspection or microsegmentation controls on the actual east-west path with least-privilege policy. Deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. Capture a bounded authorized packet trace at the relevant hop rather than treating flow metadata as packet content. Define application-aware access policy with inspected services and segmented industrial destinations. ExplanationCorrect Answer B:Deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. This action specifically works because passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. Verify with: Replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. Other Answers A:An edge choke point has no visibility or enforcement over traffic that does not traverse it. The required change instead is to deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. C:Flow telemetry summarizes sessions; packets expose protocol exchanges when decryption and privacy rules allow. This failure calls for a decision to deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. D:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. The corrective action for this requirement is to deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior.
Question 122A bank's branch IPS sees the first malicious packet but detects it only after the passive span-port copy arrives. Which cause-and-effect relationship determines the best answer? Flow telemetry summarizes sessions; packets expose protocol exchanges when decryption and privacy rules allow. An edge choke point has no visibility or enforcement over traffic that does not traverse it. Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. ExplanationCorrect Answer D:Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. The practical corrective action is: Deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. Confirm it by: Replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. Other Answers A:Flow telemetry summarizes sessions; packets expose protocol exchanges when decryption and privacy rules allow. In the stated system, passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. B:An edge choke point has no visibility or enforcement over traffic that does not traverse it. In the stated system, passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. C:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. By contrast, passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision.
Question 123A bank's branch IPS sees the first malicious packet but detects it only after the passive span-port copy arrives. Which observable result shows the correction is effective? Capture a workload-to-workload flow before and after the change and verify denied lateral traffic is stopped. Replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. Compare the packet TLS handshake with flow start/end records to locate the failed negotiation. Test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. ExplanationCorrect Answer B:Replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. The evidence confirms the intended action: Deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. It matters because passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. Other Answers A:An edge choke point has no visibility or enforcement over traffic that does not traverse it. Proving this correction calls for a check to replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. C:Flow telemetry summarizes sessions; packets expose protocol exchanges when decryption and privacy rules allow. The failure is checked more directly by a test to replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. D:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. The relevant acceptance check is to replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows.
Question 124A bank's branch IPS sees the first malicious packet but detects it only after the passive span-port copy arrives. What should be institutionalized before future deployments? Review application and identity policy after equipment and service inventories change. Define privacy-aware packet capture retention and escalation triggers for deep troubleshooting. Map actual service paths and trust boundaries before deciding where firewall and IPS controls operate. Document inline placement, throughput capacity, high availability and safe failure policy. ExplanationCorrect Answer D:Document inline placement, throughput capacity, high availability and safe failure policy. This safeguard limits repeat failures because passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. The direct correction remains: Deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. Other Answers A:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. A more direct preventive measure is to document inline placement, throughput capacity, high availability and safe failure policy. B:Flow telemetry summarizes sessions; packets expose protocol exchanges when decryption and privacy rules allow. The lasting safeguard is to document inline placement, throughput capacity, high availability and safe failure policy. C:An edge choke point has no visibility or enforcement over traffic that does not traverse it. The stronger recurring control is to document inline placement, throughput capacity, high availability and safe failure policy.
Question 125A factory places a firewall between its office and operational network but permits any TCP session once the destination port is 443. What should the engineer change first to meet these conditions? Place inspection or microsegmentation controls on the actual east-west path with least-privilege policy. Define application-aware access policy with inspected services and segmented industrial destinations. Deploy inline IPS on the authorized traffic path with monitored bypass and failure behavior. Scope FTD access control by application identity, relevant endpoints and business authorization. ExplanationCorrect Answer B:Define application-aware access policy with inspected services and segmented industrial destinations. This action specifically works because port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. Verify with: Test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. Other Answers A:An edge choke point has no visibility or enforcement over traffic that does not traverse it. The required change instead is to define application-aware access policy with inspected services and segmented industrial destinations. C:Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. The required change instead is to define application-aware access policy with inspected services and segmented industrial destinations. D:Application visibility and control can distinguish sanctioned services that share common transport ports. The required change instead is to define application-aware access policy with inspected services and segmented industrial destinations.
Question 126A factory places a firewall between its office and operational network but permits any TCP session once the destination port is 443. Which cause-and-effect relationship determines the best answer? Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. Application visibility and control can distinguish sanctioned services that share common transport ports. An edge choke point has no visibility or enforcement over traffic that does not traverse it. Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. ExplanationCorrect Answer A:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. The practical corrective action is: Define application-aware access policy with inspected services and segmented industrial destinations. Confirm it by: Test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. Other Answers B:Application visibility and control can distinguish sanctioned services that share common transport ports. By contrast, port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. C:An edge choke point has no visibility or enforcement over traffic that does not traverse it. By contrast, port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. D:Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. By contrast, port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection.
Question 127A factory places a firewall between its office and operational network but permits any TCP session once the destination port is 443. Which observable result shows the correction is effective? Capture a workload-to-workload flow before and after the change and verify denied lateral traffic is stopped. Test approved app traffic and a different HTTPS application from the same source against the rule. Test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. Replay a harmless attack signature in a lab and confirm the inline policy stops transit traffic without breaking allowed banking flows. ExplanationCorrect Answer C:Test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. The evidence confirms the intended action: Define application-aware access policy with inspected services and segmented industrial destinations. It matters because port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. Other Answers A:An edge choke point has no visibility or enforcement over traffic that does not traverse it. A more meaningful verification is to test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. B:Application visibility and control can distinguish sanctioned services that share common transport ports. A more meaningful verification is to test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs. D:Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. A more meaningful verification is to test a sanctioned management application and an unauthorized HTTPS tunnel against the policy and event logs.
Question 128A factory places a firewall between its office and operational network but permits any TCP session once the destination port is 443. What should be institutionalized before future deployments? Review application discovery logs before expanding access rules. Map actual service paths and trust boundaries before deciding where firewall and IPS controls operate. Review application and identity policy after equipment and service inventories change. Document inline placement, throughput capacity, high availability and safe failure policy. ExplanationCorrect Answer C:Review application and identity policy after equipment and service inventories change. This safeguard limits repeat failures because port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. The direct correction remains: Define application-aware access policy with inspected services and segmented industrial destinations. Other Answers A:Application visibility and control can distinguish sanctioned services that share common transport ports. The lasting safeguard is to review application and identity policy after equipment and service inventories change. B:An edge choke point has no visibility or enforcement over traffic that does not traverse it. The lasting safeguard is to review application and identity policy after equipment and service inventories change. D:Passive observation can alert but cannot reliably block the live packet, whereas inline inspection can enforce a decision. The lasting safeguard is to review application and identity policy after equipment and service inventories change.
Question 129A data center deploys a single stateful firewall with no redundancy despite a continuous payment workload requirement. What should the engineer change first to meet these conditions? Define application-aware access policy with inspected services and segmented industrial destinations. Design an HA pair with validated stateful failover and equivalent policy/software revisions. Use centralized multiddevice policy management with scope-aware inheritance and controlled exceptions. Place inspection or microsegmentation controls on the actual east-west path with least-privilege policy. ExplanationCorrect Answer B:Design an HA pair with validated stateful failover and equivalent policy/software revisions. This action specifically works because a single inspection appliance creates an availability bottleneck even when its rules are technically correct. Verify with: Force a planned failover during an approved test and verify payment flows recover within the service objective. Other Answers A:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. The corrective action for this requirement is to design an HA pair with validated stateful failover and equivalent policy/software revisions. C:One central policy manager improves consistency and auditability across managed inspection devices. The required change instead is to design an HA pair with validated stateful failover and equivalent policy/software revisions. D:An edge choke point has no visibility or enforcement over traffic that does not traverse it. The required change instead is to design an HA pair with validated stateful failover and equivalent policy/software revisions.
Question 130A data center deploys a single stateful firewall with no redundancy despite a continuous payment workload requirement. Which cause-and-effect relationship determines the best answer? One central policy manager improves consistency and auditability across managed inspection devices. An edge choke point has no visibility or enforcement over traffic that does not traverse it. A single inspection appliance creates an availability bottleneck even when its rules are technically correct. Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. ExplanationCorrect Answer C:A single inspection appliance creates an availability bottleneck even when its rules are technically correct. The practical corrective action is: Design an HA pair with validated stateful failover and equivalent policy/software revisions. Confirm it by: Force a planned failover during an approved test and verify payment flows recover within the service objective. Other Answers A:One central policy manager improves consistency and auditability across managed inspection devices. In the stated system, a single inspection appliance creates an availability bottleneck even when its rules are technically correct. B:An edge choke point has no visibility or enforcement over traffic that does not traverse it. In the stated system, a single inspection appliance creates an availability bottleneck even when its rules are technically correct. D:Port 443 alone does not identify the application or user and cannot substitute for policy context and threat inspection. By contrast, a single inspection appliance creates an availability bottleneck even when its rules are technically correct.