McAfee Secured

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

100% Huawei H12-821 Guaranteed Success With Testking Training Materials

Get Real H12-821 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 24

Question 230

The datacom engineering team at a library district network after a planned hardware refresh reviews this independent fictional networking case: A static route is configured to a next-hop address that is absent from the local routing table and never becomes active. A proposed remedy is: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop. Which technical principle most directly supports this remedy?

  1. Longest-prefix matching precedes route preference comparisons between routes of different mask lengths
  2. A static route depending on recursive resolution cannot forward when its next-hop recursion fails
  3. A healthy control plane does not prove that hardware forwarding entries are programmed in the data plane
  4. IS-IS adjacencies require at least one common enabled routing level

Explanation

Correct Answer

B:

A static route depending on recursive resolution cannot forward when its next-hop recursion fails. This directly explains why the corrective operation is appropriate: Provide a resolvable route to the next hop or replace it with the verified directly reachable next hop. The observed acceptance evidence should be: The static route is active and its recursive next hop resolves to an operational interface.

Incorrect Answers

A:

Longest-prefix matching precedes route preference comparisons between routes of different mask lengths. That principle is relevant when a branch sends payroll traffic to a backup path although a more-specific prefix was advertised through the primary router. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; a static route depending on recursive resolution cannot forward when its next-hop recursion fails.

C:

A healthy control plane does not prove that hardware forwarding entries are programmed in the data plane. That principle is relevant when newly installed routers accept control sessions but transit packets fail because an upstream line card has not finished installing forwarding entries. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; provide a resolvable route to the next hop or replace it with the verified directly reachable next hop.

D:

IS-IS adjacencies require at least one common enabled routing level. That principle is relevant when a transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2. Here, a static route is configured to a next-hop address that is absent from the local routing table and never becomes active; the static route is active and its recursive next hop resolves to an operational interface.

Question 231

The datacom engineering team at a consumer electronics manufacturer as part of an acceptance test reviews this independent fictional networking case: Two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit. If this issue remains unresolved, what immediate availability or security risk follows most directly?

  1. Misaligned instance mappings can strand a subset of VLANs while others work
  2. Single-member attachment can defeat apparent logical redundancy
  3. Accidental region borders reduce planned load sharing and may alter blocked ports
  4. Unprotected edge ports can introduce layer-2 loops that overwhelm shared broadcast segments

Explanation

Correct Answer

C:

Accidental region borders reduce planned load sharing and may alter blocked ports. Leaving the exact fault unresolved means: Two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit. The intended response is: Reconcile MST region name, revision and VLAN-instance mapping across the devices.

Incorrect Answers

A:

When traffic in one VLAN follows an unexpected blocked trunk because adjacent switches assign that VLAN to different MST instances, misaligned instance mappings can strand a subset of VLANs while others work. The present failure is different: Two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit. MSTP region equivalence depends on a matching region configuration identifier, not just physical adjacency.

B:

Single-member attachment can defeat apparent logical redundancy. That consequence could follow when a stack member fails and connected access ports remain inaccessible because redundancy and member-level uplink placement were not reviewed. Here, two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit; reconcile MST region name, revision and VLAN-instance mapping across the devices.

D:

A user connects a small unmanaged switch that begins forwarding bridge protocol frames into an edge-designated campus port. In that situation, unprotected edge ports can introduce layer-2 loops that overwhelm shared broadcast segments. Here instead, two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit. Both switches report the same region identity and expected instance topology. For consumer electronics manufacturer as part of an acceptance test, the acceptance test should show that both switches report the same region identity and expected instance topology.

Question 232

The datacom engineering team at an industrial safety organization during a simulated failover test reviews this independent fictional networking case: A receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. Which corrective engineering action most directly addresses this problem?

  1. Repair IGMP query/reply processing and verify membership refresh timers
  2. Configure compatible SSM group ranges and source-aware membership signalling
  3. Apply appropriate multicast boundary and scope controls for the group range
  4. Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate

Explanation

Correct Answer

B:

Configure compatible SSM group ranges and source-aware membership signalling. This is the specific action that addresses the fictional fault: A receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. The governing technical reason is: Source-specific multicast forwarding is tied to a particular source and group rather than RP-based ASM discovery. Verify by checking: The receiver joins the intended source/group pair and cannot accidentally switch to a different sender.

Incorrect Answers

A:

Repairing IGMP query/reply processing and verifying membership refresh timers is relevant when an access VLAN loses a multicast receiver after a quiet period because periodic IGMP membership updates never reach the upstream querier. It does not resolve this case: A receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. Source-specific multicast forwarding is tied to a particular source and group rather than RP-based ASM discovery.

C:

A training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade. This is where applying appropriate multicast boundary and scope controls for the group range would help. By contrast, a receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. Configure compatible SSM group ranges and source-aware membership signalling.

D:

A dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. Investigating PIM-DM neighbor/prune behavior and removing unnecessary dense-mode flooding where appropriate can respond to that condition, but it would not correct the reported fault: A receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. The receiver joins the intended source/group pair and cannot accidentally switch to a different sender.

Question 233

The datacom engineering team at an automotive parts manufacturer as part of an acceptance test reviews this independent fictional networking case: A voice QoS class remains at zero matches because the classifier checks a DSCP value that the access edge never assigns. Which corrective engineering action most directly addresses this problem?

  1. Apply a narrowly matched import/export route policy during protocol redistribution
  2. Constrain ge/le mask-length ranges and test boundary prefix acceptance
  3. Align ingress marking and MQC traffic-classifier matching before adjusting queue parameters
  4. Reorder and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny

Explanation

Correct Answer

C:

Align ingress marking and MQC traffic-classifier matching before adjusting queue parameters. This is the specific action that addresses the fictional fault: A voice QoS class remains at zero matches because the classifier checks a DSCP value that the access edge never assigns. The governing technical reason is: Queue behavior depends on packets being correctly classified by actual header fields at the enforcement point. Verify by checking: Classifier counters rise for real voice flows and the intended behavior is applied.

Incorrect Answers

A:

A border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution. This is where applying a narrowly matched import/export route policy during protocol redistribution would help. By contrast, a voice QoS class remains at zero matches because the classifier checks a DSCP value that the access edge never assigns. Queue behavior depends on packets being correctly classified by actual header fields at the enforcement point.

B:

A routing filter intended to allow a /24 aggregate accidentally allows unauthorized /25 and /32 subprefixes. Constraining ge/le mask-length ranges and testing boundary prefix acceptance can respond to that condition, but it would not correct the reported fault: A voice QoS class remains at zero matches because the classifier checks a DSCP value that the access edge never assigns. Align ingress marking and MQC traffic-classifier matching before adjusting queue parameters.

D:

A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. This is where reordering and narrow the matching conditions so explicit permitted prefixes are evaluated before the general deny would help. By contrast, a voice QoS class remains at zero matches because the classifier checks a DSCP value that the access edge never assigns. Classifier counters rise for real voice flows and the intended behavior is applied.

Question 234

The datacom engineering team at a hospital imaging provider during a controlled network cutover reviews this independent fictional networking case: A receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. A proposed remedy is: Configure compatible SSM group ranges and source-aware membership signalling. Which technical principle most directly supports this remedy?

  1. PIM-DM initially floods and then prunes branches without receivers
  2. IGMP membership state is maintained by router queries and host reports rather than permanent discovery
  3. Source-specific multicast forwarding is tied to a particular source and group rather than RP-based ASM discovery
  4. Without a querier, snooping membership tables can age out even while hosts remain attached

Explanation

Correct Answer

C:

Source-specific multicast forwarding is tied to a particular source and group rather than RP-based ASM discovery. This directly explains why the corrective operation is appropriate: Configure compatible SSM group ranges and source-aware membership signalling. The observed acceptance evidence should be: The receiver joins the intended source/group pair and cannot accidentally switch to a different sender.

Incorrect Answers

A:

When a dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent, PIM-DM initially floods and then prunes branches without receivers. By contrast, a receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state; source-specific multicast forwarding is tied to a particular source and group rather than RP-based ASM discovery.

B:

IGMP membership state is maintained by router queries and host reports rather than permanent discovery. That rule governs a different situation: An access VLAN loses a multicast receiver after a quiet period because periodic IGMP membership updates never reach the upstream querier. Here, a receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state. Configure compatible SSM group ranges and source-aware membership signalling.

D:

Without a querier, snooping membership tables can age out even while hosts remain attached. That principle is relevant when a VLAN with multicast hosts has no functioning IGMP querier after its original gateway moves away. Here, a receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state; the receiver joins the intended source/group pair and cannot accidentally switch to a different sender.

Question 235

The datacom engineering team at a university hospital during a network security audit reviews this independent fictional networking case: A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. The team applies this remedy: Use supported BFD or remote path tracking to withdraw the unusable static next hop. Which observation would directly demonstrate that this specific issue is resolved?

  1. An injected upstream failure withdraws the primary route and backup traffic succeeds
  2. The planned primary device owns the virtual gateway after recovery and failover still works
  3. Host neighbor tables resolve to the expected virtual MAC and sessions recover after failover
  4. Primary uplink failure transfers Master to the router with valid outbound reachability

Explanation

Correct Answer

A:

An injected upstream failure withdraws the primary route and backup traffic succeeds. This is a directly observable check for the proposed correction: Use supported BFD or remote path tracking to withdraw the unusable static next hop. The particular failure being investigated is: A static backup path remains inactive while the primary next hop fails beyond a locally Up interface.

Incorrect Answers

B:

A backup gateway becomes VRRP Master after an unrelated restart despite the primary router being healthy. The planned primary device owns the virtual gateway after recovery and failover still works. This observation does not prove the correction for the reported defect: A static backup path remains inactive while the primary next hop fails beyond a locally Up interface. Physical interface state alone cannot detect all remote next-hop failures.

C:

Host neighbor tables resolve to the expected virtual MAC and sessions recover after failover. That result could validate a repair when a host keeps sending traffic to the old gateway's MAC after a VRRP switchover because the access LAN fails to update its neighbor cache. Here, a static backup path remains inactive while the primary next hop fails beyond a locally Up interface; use supported BFD or remote path tracking to withdraw the unusable static next hop.

D:

Primary uplink failure transfers Master to the router with valid outbound reachability. That result could validate a repair when a VRRP Master loses its external uplink but keeps serving clients because only its local VLAN interface remains operational. Here, a static backup path remains inactive while the primary next hop fails beyond a locally Up interface; failure beyond the local link can strand static-route traffic indefinitely.

Question 236

The datacom engineering team at an airport facilities team while tracing a degraded application flow reviews this independent fictional networking case: A border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution. The team applies this remedy: Apply a narrowly matched import/export route policy during protocol redistribution. Which observation would directly demonstrate that this specific issue is resolved?

  1. Bidirectional trace confirms both directions traverse a consistent stateful inspection path
  2. Matched-rule counters and received-route sets show only intended prefixes accepted
  3. Capture on both sides confirms expected DSCP values and queue counters reflect the correct class
  4. The BGP advertisement list excludes internal infrastructure prefixes while approved service routes remain

Explanation

Correct Answer

D:

The BGP advertisement list excludes internal infrastructure prefixes while approved service routes remain. This is a directly observable check for the proposed correction: Apply a narrowly matched import/export route policy during protocol redistribution. The particular failure being investigated is: A border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution.

Incorrect Answers

A:

Bidirectional trace confirms both directions traverse a consistent stateful inspection path. This check belongs to a stateful firewall intermittently drops responses after equal-cost routing spreads the forward and return flows across unrelated inspection nodes. The actual defect is different: A border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution. Redistribution can cross routing trust boundaries and must specify which routes are authorized to cross.

B:

A new route-policy reject rule unintentionally blocks all later permitted customer prefixes because the rule order is too broad. Matched-rule counters and received-route sets show only intended prefixes accepted. This observation does not prove the correction for the reported defect: A border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution. Apply a narrowly matched import/export route policy during protocol redistribution.

C:

Capture on both sides confirms expected DSCP values and queue counters reflect the correct class. This check belongs to delay-sensitive packets leave the campus with voice markings but are remarked to best-effort at a trusted border. The actual defect is different: A border router injects internal transit and management prefixes into external BGP due to unrestricted redistribution. Broad redistribution can expose internal topology and destabilize edge routing.

Question 237

The datacom engineering team at a government service campus after a monitored link change reviews this independent fictional networking case: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Which corrective engineering action most directly addresses this problem?

  1. Resolve duplicate addressing and verify Neighbor Discovery duplicate-address-detection behavior
  2. Specify the appropriate egress interface with the link-local next hop and verify neighbor discovery
  3. Correct router advertisement prefix and flags for the chosen IPv6 addressing design
  4. Align the totally stub area behavior at the ABR and verify the intended default-based forwarding

Explanation

Correct Answer

C:

Correct router advertisement prefix and flags for the chosen IPv6 addressing design. This is the specific action that addresses the fictional fault: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. The governing technical reason is: SLAAC relies on received router advertisement prefix information and associated address configuration flags. Verify by checking: Clients form valid unique global addresses and default routes from the expected RA source.

Incorrect Answers

A:

Resolving duplicate addressing and verifying Neighbor Discovery duplicate-address-detection behavior is relevant when two replacement servers are configured with the same IPv6 address and one fails to bring the address online. It does not resolve this case: Clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. SLAAC relies on received router advertisement prefix information and associated address configuration flags.

B:

When an IPv6 static route uses a link-local next hop without a meaningful outgoing-interface scope and fails to install correctly, specifying the appropriate egress interface with the link-local next hop and verifying neighbor discovery could be appropriate. Here, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Correct router advertisement prefix and flags for the chosen IPv6 addressing design.

D:

Branch routers in a totally stubby OSPF area receive interarea routes unexpectedly after a change on one ABR. This is where aligning the totally stub area behavior at the ABR and verifying the intended default-based forwarding would help. By contrast, clients on a new IPv6 VLAN fail to obtain global addresses because router advertisements lack the intended autonomous prefix information. Clients form valid unique global addresses and default routes from the expected RA source.

Question 238

The datacom engineering team at a library district network after a planned hardware refresh reviews this independent fictional networking case: A multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. Which corrective engineering action most directly addresses this problem?

  1. Investigate PIM-DM neighbor/prune behavior and remove unnecessary dense-mode flooding where appropriate
  2. Configure compatible SSM group ranges and source-aware membership signalling
  3. Apply appropriate multicast boundary and scope controls for the group range
  4. Verify the multicast RPF route and correct source reachability or appropriate multicast routing state

Explanation

Correct Answer

D:

Verify the multicast RPF route and correct source reachability or appropriate multicast routing state. This is the specific action that addresses the fictional fault: A multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. The governing technical reason is: Multicast RPF checks help prevent loops by accepting traffic from the interface on the expected source path. Verify by checking: RPF diagnostics name the arriving interface as valid and the downstream stream resumes.

Incorrect Answers

A:

Investigating PIM-DM neighbor/prune behavior and removing unnecessary dense-mode flooding where appropriate is relevant when a dense-mode multicast flow floods a branch that has no interested receivers because prune state is absent. It does not resolve this case: A multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. Multicast RPF checks help prevent loops by accepting traffic from the interface on the expected source path.

B:

When a receiver requests a specific-source multicast stream but the network treats its membership as ordinary any-source group state, configuring compatible SSM group ranges and source-aware membership signalling could be appropriate. Here, a multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. Verify the multicast RPF route and correct source reachability or appropriate multicast routing state.

C:

When a training-video multicast group begins leaking beyond its approved distribution region after a transport upgrade, applying appropriate multicast boundary and scope controls for the group range could be appropriate. Here, a multicast stream reaches a router from an interface other than its unicast reverse path toward the source and is discarded. RPF diagnostics name the arriving interface as valid and the downstream stream resumes.

Question 239

The datacom engineering team at a distribution warehouse group during a simulated failover test reviews this independent fictional networking case: Two core routers intended for Level-1 adjacency have incompatible area identifiers in their NET addresses. A proposed remedy is: Align the IS-IS area portion of the NET or revise the intended L1/L2 boundary. Which technical principle most directly supports this remedy?

  1. Level-1 IS-IS neighbors must belong to a compatible area while Level-2 can connect areas
  2. The IS-IS overload bit discourages transit use of an incompletely initialized router
  3. IS-IS adjacencies require at least one common enabled routing level
  4. On broadcast IS-IS circuits the DIS originates a pseudonode LSP and its election follows IS-IS priority rules

Explanation

Correct Answer

A:

Level-1 IS-IS neighbors must belong to a compatible area while Level-2 can connect areas. This directly explains why the corrective operation is appropriate: Align the IS-IS area portion of the NET or revise the intended L1/L2 boundary. The observed acceptance evidence should be: L1 neighbor state establishes and the expected area routes appear.

Incorrect Answers

B:

The IS-IS overload bit discourages transit use of an incompletely initialized router. That principle is relevant when a router recovering from reboot begins attracting transit traffic before its route state is ready. Here, two core routers intended for Level-1 adjacency have incompatible area identifiers in their NET addresses; level-1 IS-IS neighbors must belong to a compatible area while Level-2 can connect areas.

C:

IS-IS adjacencies require at least one common enabled routing level. That rule governs a different situation: A transit adjacency fails because one device allows only Level-1 while its peer is configured only for Level-2. Here, two core routers intended for Level-1 adjacency have incompatible area identifiers in their NET addresses. Align the IS-IS area portion of the NET or revise the intended L1/L2 boundary.

D:

A LAN segment elects an unstable edge router as Designated Intermediate System, producing avoidable pseudonode churn. On broadcast IS-IS circuits the DIS originates a pseudonode LSP and its election follows IS-IS priority rules. The current condition differs: Two core routers intended for Level-1 adjacency have incompatible area identifiers in their NET addresses. L1 neighbor state establishes and the expected area routes appear.

Question 240

The datacom engineering team at a regional health network during a controlled network cutover reviews this independent fictional networking case: A campus switch cluster loses its inter-chassis heartbeat and both nodes attempt to remain active on shared services. A proposed remedy is: Restore dual-active detection or an approved split-brain suppression mechanism and test isolation behavior. Which technical principle most directly supports this remedy?

  1. MSTP region equivalence depends on a matching region configuration identifier, not just physical adjacency
  2. Cluster heartbeat failures require independent mechanisms to avoid concurrent active ownership of the same logical service
  3. RSTP alternate ports are designed to become forwarding backups after topology changes
  4. The spanning-tree root selection follows bridge identifier priority rather than physical hierarchy labels

Explanation

Correct Answer

B:

Cluster heartbeat failures require independent mechanisms to avoid concurrent active ownership of the same logical service. This directly explains why the corrective operation is appropriate: Restore dual-active detection or an approved split-brain suppression mechanism and test isolation behavior. The observed acceptance evidence should be: Controlled heartbeat loss leaves only one authorized active forwarding role with no duplicate gateway responses.

Incorrect Answers

A:

When two switches intended in one MSTP region behave as if separated by a regional boundary after an unnoticed configuration edit, MSTP region equivalence depends on a matching region configuration identifier, not just physical adjacency. By contrast, a campus switch cluster loses its inter-chassis heartbeat and both nodes attempt to remain active on shared services; cluster heartbeat failures require independent mechanisms to avoid concurrent active ownership of the same logical service.

C:

RSTP alternate ports are designed to become forwarding backups after topology changes. That principle is relevant when a redundant access uplink stays blocked even after the active link fails because the switch has not converged its port roles correctly. Here, a campus switch cluster loses its inter-chassis heartbeat and both nodes attempt to remain active on shared services; restore dual-active detection or an approved split-brain suppression mechanism and test isolation behavior.

D:

When a low-capacity access switch becomes the spanning-tree root because its bridge priority was left lower than the distribution pair, the spanning-tree root selection follows bridge identifier priority rather than physical hierarchy labels. By contrast, a campus switch cluster loses its inter-chassis heartbeat and both nodes attempt to remain active on shared services; controlled heartbeat loss leaves only one authorized active forwarding role with no duplicate gateway responses.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests