McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 8

Question 70

A maintenance window is available for the following problem: A laptop upgrade fails to recognize a newly installed memory module, although the old module still works in the same slot. Which intervention is most appropriate?

  1. Install the vendor-compatible SODIMM type and capacity after checking the service manual
  2. Reconnect the approved webcam cable with power removed and test capture before closing the bezel
  3. Reseat the keyboard ribbon with power removed and secure the connector latch
  4. Use a supported memory module matched to the platform and rerun diagnostics

Explanation

Correct Answer

A:

The replacement SODIMM generation and supported voltage differ from the system's service specification, consistent with an incompatible laptop memory module specifications.

Incorrect Answers

B:

The internal camera is absent from hardware enumeration and the display assembly's camera flex cable is loose, consistent with a disconnected internal webcam cable.

C:

Inspecting the keyboard flex connector reveals a partly open retaining latch, consistent with an unseated keyboard ribbon or locking connector.

D:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

Question 71

A video conference client opens successfully, but the laptop's built-in camera remains dark after a screen assembly swap while a USB webcam works. Which repair or configuration change addresses the underlying problem?

  1. Reconnect the microphone harness and verify operating-system input selection and recording
  2. Reconnect the approved webcam cable with power removed and test capture before closing the bezel
  3. Slide the physical shutter open and verify a local preview with user consent
  4. Reseat the keyboard ribbon with power removed and secure the connector latch

Explanation

Correct Answer

B:

The internal camera is absent from hardware enumeration and the display assembly's camera flex cable is loose, consistent with a disconnected internal webcam cable.

Incorrect Answers

A:

The microphone input device is missing or silent and inspection finds its tiny connector disconnected, consistent with an integrated microphone harness not attached.

C:

The camera status light turns on but the lens remains visibly covered by the shutter tab, consistent with a physical webcam privacy shutter engaged.

D:

Inspecting the keyboard flex connector reveals a partly open retaining latch, consistent with an unseated keyboard ribbon or locking connector.

Question 72

A maintenance window is available for the following problem: A telehealth laptop records sound through a USB microphone but its integrated microphone never receives input after a display service. Which intervention is most appropriate?

  1. Reconnect the approved webcam cable with power removed and test capture before closing the bezel
  2. Reconnect the microphone harness and verify operating-system input selection and recording
  3. Restore the supported storage mode and boot settings, then verify the drive's boot partition
  4. Free or replace the damaged pigtail and route it in the designated display channel

Explanation

Correct Answer

B:

The microphone input device is missing or silent and inspection finds its tiny connector disconnected, consistent with an integrated microphone harness not attached.

Incorrect Answers

A:

The internal camera is absent from hardware enumeration and the display assembly's camera flex cable is loose, consistent with a disconnected internal webcam cable.

C:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

D:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

Question 73

The owner wants a specific repair, not merely more monitoring: A portable workstation's fingerprint reader stops enrolling fingers after a palm-rest replacement, while PIN sign-in remains available. What should the technician do?

  1. Reconnect the approved webcam cable with power removed and test capture before closing the bezel
  2. Reseat the keyboard ribbon with power removed and secure the connector latch
  3. Slide the physical shutter open and verify a local preview with user consent
  4. Reseat the biometric sensor connector and verify detection before enrollment

Explanation

Correct Answer

D:

Device enumeration does not show the fingerprint sensor and its internal cable is unlatched, consistent with a fingerprint sensor ribbon not connected.

Incorrect Answers

A:

The internal camera is absent from hardware enumeration and the display assembly's camera flex cable is loose, consistent with a disconnected internal webcam cable.

B:

Inspecting the keyboard flex connector reveals a partly open retaining latch, consistent with an unseated keyboard ribbon or locking connector.

C:

The camera status light turns on but the lens remains visibly covered by the shutter tab, consistent with a physical webcam privacy shutter engaged.

Question 74

A serviceable notebook has a mechanical camera shutter that remains closed even after the camera application is allowed in privacy settings. Which solution addresses the cause without unnecessary unrelated changes?

  1. Choose a compatible M.2 NVMe device with the supported dimensions and keying
  2. Slide the physical shutter open and verify a local preview with user consent
  3. Reseat the biometric sensor connector and verify detection before enrollment
  4. Reconnect the approved webcam cable with power removed and test capture before closing the bezel

Explanation

Correct Answer

B:

The camera status light turns on but the lens remains visibly covered by the shutter tab, consistent with a physical webcam privacy shutter engaged.

Incorrect Answers

A:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

C:

Device enumeration does not show the fingerprint sensor and its internal cable is unlatched, consistent with a fingerprint sensor ribbon not connected.

D:

The internal camera is absent from hardware enumeration and the display assembly's camera flex cable is loose, consistent with a disconnected internal webcam cable.

Question 75

A field tablet runs only 25 minutes after a full charge; its health report shows far fewer usable watt-hours than design capacity but no battery swelling. Which corrective action is the safest and most direct response?

  1. Restore the supported storage mode and boot settings, then verify the drive's boot partition
  2. Replace the supported battery module and calibrate only as the manufacturer prescribes
  3. Stop using and charging the device, follow battery handling procedures, and install the approved replacement pack
  4. Use a supported memory module matched to the platform and rerun diagnostics

Explanation

Correct Answer

B:

Battery health reports severe capacity loss at normal temperature and charge cycles are high, consistent with an exhausted battery capacity from aging.

Incorrect Answers

A:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

C:

The battery pack is visibly distended after removing the service cover with power isolated, consistent with a swollen internal lithium-ion battery.

D:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

Question 76

A technician has authorization to fix the issue: A laptop received a new SSD and now displays no boot device; firmware sees the SSD but its storage mode is set to an incompatible controller setting. What action should be taken next?

  1. Restore the supported storage mode and boot settings, then verify the drive's boot partition
  2. Use a supported memory module matched to the platform and rerun diagnostics
  3. Replace the supported battery module and calibrate only as the manufacturer prescribes
  4. Choose a compatible M.2 NVMe device with the supported dimensions and keying

Explanation

Correct Answer

A:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

Incorrect Answers

B:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

C:

Battery health reports severe capacity loss at normal temperature and charge cycles are high, consistent with an exhausted battery capacity from aging.

D:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

Question 77

After a RAM replacement, a laptop boots normally but crashes under memory pressure; the new module's timings differ from the certified configuration. Which repair or configuration change addresses the underlying problem?

  1. Choose a compatible M.2 NVMe device with the supported dimensions and keying
  2. Free or replace the damaged pigtail and route it in the designated display channel
  3. Restore the supported storage mode and boot settings, then verify the drive's boot partition
  4. Use a supported memory module matched to the platform and rerun diagnostics

Explanation

Correct Answer

D:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

Incorrect Answers

A:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

B:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

C:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

Question 78

A maintenance window is available for the following problem: A rugged notebook loses Wi-Fi whenever the display bezel is tightened, but the signal returns when the bezel is loosened. Which intervention is most appropriate?

  1. Free or replace the damaged pigtail and route it in the designated display channel
  2. Route and reconnect the antenna cable using the manufacturer's hinge clearance path
  3. Choose a compatible M.2 NVMe device with the supported dimensions and keying
  4. Use a supported memory module matched to the platform and rerun diagnostics

Explanation

Correct Answer

A:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

Incorrect Answers

B:

Signal strength changes sharply with lid angle while the adapter stays visible in the OS, consistent with a pinched wi-fi antenna lead in the display hinge.

C:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

D:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

Question 79

The owner wants a specific repair, not merely more monitoring: A serviceable laptop storage upgrade is requested, but the replacement SSD is a 2.5-inch SATA drive and the notebook has only an M.2 NVMe socket. What should the technician do?

  1. Use a supported memory module matched to the platform and rerun diagnostics
  2. Choose a compatible M.2 NVMe device with the supported dimensions and keying
  3. Free or replace the damaged pigtail and route it in the designated display channel
  4. Restore the supported storage mode and boot settings, then verify the drive's boot partition

Explanation

Correct Answer

B:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

Incorrect Answers

A:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

C:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

D:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

Question 80

A tablet with USB-C can transfer files over a cheap cable, yet a portable monitor stays black despite working with its supplied cable. Which solution addresses the cause without unnecessary unrelated changes?

  1. Select an approved adapter or headset compatible with the phone's audio and connector support
  2. Use a dock and USB-C power supply that meet the laptop's supported power requirements
  3. Use a compatible full-featured USB-C cable and verify the tablet supports video output
  4. Use an appropriate USB-C-to-USB-A host adapter and verify microphone power requirements

Explanation

Correct Answer

C:

The working cable is rated for DisplayPort alternate mode while the cheap cable supports only charging and basic data, consistent with an usb-c cable lacks required video alternate-mode capability.

Incorrect Answers

A:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

B:

The dock advertises a lower Power Delivery wattage than the laptop's required charging input, consistent with a dock power delivery is insufficient for the laptop.

D:

The tablet supports USB OTG/host operation but has no native USB-A receptacle, consistent with an usb-c host adapter for a legacy usb-a peripheral.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests