McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 31

Question 300

A technician connects an isolated virtual-storage network carrying block-level data between servers and disk arrays. Which corrective action is the safest and most direct response?

  1. Design a SAN fabric with supported storage protocols and redundant paths
  2. Verify DSL modem and line quality and consider a closer cabinet or alternative access method
  3. Align and provision the WISP radio with clear line of sight and an appropriate router handoff
  4. Select a fiber plan and appropriate ONT/router supporting the required throughput

Explanation

Correct Answer

A:

Servers see logical storage volumes over dedicated storage transport rather than ordinary file shares, consistent with a storage area network for block storage.

Incorrect Answers

B:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

C:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

D:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

Question 301

A technician has authorization to fix the issue: A rural business gets broadband from a fixed antenna aimed at a provider tower, not from cellular phone service. What action should be taken next?

  1. Verify DSL modem and line quality and consider a closer cabinet or alternative access method
  2. Design a SAN fabric with supported storage protocols and redundant paths
  3. Align and provision the WISP radio with clear line of sight and an appropriate router handoff
  4. Select a fiber plan and appropriate ONT/router supporting the required throughput

Explanation

Correct Answer

C:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

Incorrect Answers

A:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

B:

Servers see logical storage volumes over dedicated storage transport rather than ordinary file shares, consistent with a storage area network for block storage.

D:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

Question 302

A technician must locate which unmarked office wall jack terminates in a crowded wiring closet without generating normal network traffic. Which repair or configuration change addresses the underlying problem?

  1. Reterminate or replace the cable and retest wiremap and length
  2. Use the analyzer to choose a supported channel and placement plan and retest
  3. Use an IDC punchdown tool following one consistent T568 wiring standard
  4. Use a toner and probe on a safely disconnected cable and label the matching ends

Explanation

Correct Answer

D:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

Incorrect Answers

A:

A pair-level tester reports an open or incorrect pin mapping in the terminated cable, consistent with a copper cable tester for wiremap faults.

B:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

C:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Question 303

A maintenance window is available for the following problem: A new patch cable has intermittent connectivity and the technician suspects crossed conductors or an open pair. Which intervention is most appropriate?

  1. Reterminate or replace the cable and retest wiremap and length
  2. Use a toner and probe on a safely disconnected cable and label the matching ends
  3. Use the analyzer to choose a supported channel and placement plan and retest
  4. Use an IDC punchdown tool following one consistent T568 wiring standard

Explanation

Correct Answer

A:

A pair-level tester reports an open or incorrect pin mapping in the terminated cable, consistent with a copper cable tester for wiremap faults.

Incorrect Answers

B:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

C:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

D:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Question 304

The owner wants a specific repair, not merely more monitoring: An office reports poor wireless performance and needs to identify nearby SSIDs and the channels they occupy. What should the technician do?

  1. Use the analyzer to choose a supported channel and placement plan and retest
  2. Use an IDC punchdown tool following one consistent T568 wiring standard
  3. Install an approved tap at the correct segment and protect access to captured data
  4. Use a toner and probe on a safely disconnected cable and label the matching ends

Explanation

Correct Answer

A:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

Incorrect Answers

B:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

C:

A compatible tap delivers packet copies to a monitor port without relying on the endpoint OS, consistent with a network tap for observation.

D:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

Question 305

A technician has to attach individual solid copper conductor pairs to a wall-mounted keystone jack. Which solution addresses the cause without unnecessary unrelated changes?

  1. Use an IDC punchdown tool following one consistent T568 wiring standard
  2. Reterminate or replace the cable and retest wiremap and length
  3. Use the analyzer to choose a supported channel and placement plan and retest
  4. Use a toner and probe on a safely disconnected cable and label the matching ends

Explanation

Correct Answer

A:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Incorrect Answers

B:

A pair-level tester reports an open or incorrect pin mapping in the terminated cable, consistent with a copper cable tester for wiremap faults.

C:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

D:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

Question 306

A switched network is unexpectedly retransmitting packets, and the support team needs a passive copy of traffic for an authorized monitoring sensor. Which corrective action is the safest and most direct response?

  1. Use an IDC punchdown tool following one consistent T568 wiring standard
  2. Use a toner and probe on a safely disconnected cable and label the matching ends
  3. Install an approved tap at the correct segment and protect access to captured data
  4. Use the analyzer to choose a supported channel and placement plan and retest

Explanation

Correct Answer

C:

A compatible tap delivers packet copies to a monitor port without relying on the endpoint OS, consistent with a network tap for observation.

Incorrect Answers

A:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

B:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

D:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

Question 307

A user asks what may happen if the issue is not correctly handled: A support technician can resolve an internal server's name but remote graphical administration fails through a firewall that allows only TCP 443. Which outcome is best supported?

  1. RDP can be reachable on the network yet fail during user authorization
  2. Network policy may be open to the right server while the client reaches the wrong address
  3. Opening HTTPS alone does not deliver native RDP connectivity
  4. Opening a transit firewall cannot help if the destination does not listen for RDP

Explanation

Correct Answer

C:

The approved server listens for RDP on TCP 3389 while the path policy only permits HTTPS, consistent with a remote desktop protocol port not permitted.

Incorrect Answers

A:

A TCP connection reaches port 3389 but the server denies the user's remote logon rights, consistent with a rdp authentication rejected by destination policy.

B:

The hostname resolves to a retired server even though the approved endpoint has a working TCP 3389 listener, consistent with an incorrect rdp dns target selection.

D:

Local checks show no RDP listener on TCP 3389 even from the destination host itself, consistent with a rdp service disabled on the destination.

Question 308

A browser can reach a company's intranet by numeric address, but name resolution fails for all new subdomains after a DNS firewall change. Which prediction follows from this particular failure mode?

  1. Opening HTTPS alone does not deliver native RDP connectivity
  2. Permitting web ports does not replace DNS service transport
  3. A successful hostname lookup does not imply that file-sharing traffic is permitted
  4. The ability to read messages over IMAP does not establish an outbound mail submission path

Explanation

Correct Answer

B:

Both UDP and TCP queries to port 53 fail while the resolver address itself responds to basic network probes, consistent with a dns transport blocked between clients and resolver.

Incorrect Answers

A:

The approved server listens for RDP on TCP 3389 while the path policy only permits HTTPS, consistent with a remote desktop protocol port not permitted.

C:

A network test shows TCP 445 blocked between the client VLAN and approved file server, consistent with a smb access restricted by the segment firewall.

D:

Mail receiving on IMAP works while the configured submission service's TCP port is denied, consistent with a smtp submission path blocked.

Question 309

When documenting this incident, a technician notes: An employee's laptop retrieves mail with IMAP but cannot submit new outgoing messages after egress filtering tightened. Which limitation is most directly relevant?

  1. A successful hostname lookup does not imply that file-sharing traffic is permitted
  2. Basic POP3 retrieval does not inherently keep multiple device mailboxes synchronized
  3. The ability to read messages over IMAP does not establish an outbound mail submission path
  4. Permitting web ports does not replace DNS service transport

Explanation

Correct Answer

C:

Mail receiving on IMAP works while the configured submission service's TCP port is denied, consistent with a smtp submission path blocked.

Incorrect Answers

A:

A network test shows TCP 445 blocked between the client VLAN and approved file server, consistent with a smb access restricted by the segment firewall.

B:

The client connects to TCP 110 and is configured to delete messages on retrieval, consistent with a pop3 message retrieval behavior.

D:

Both UDP and TCP queries to port 53 fail while the resolver address itself responds to basic network probes, consistent with a dns transport blocked between clients and resolver.

Question 310

An older file server exposes a shared folder, but a newly segmented client cannot map it even though DNS resolves its hostname. Which risk or behavior would be expected if a superficially attractive but incorrect workaround were used?

  1. The ability to read messages over IMAP does not establish an outbound mail submission path
  2. Opening HTTPS alone does not deliver native RDP connectivity
  3. Permitting web ports does not replace DNS service transport
  4. A successful hostname lookup does not imply that file-sharing traffic is permitted

Explanation

Correct Answer

D:

A network test shows TCP 445 blocked between the client VLAN and approved file server, consistent with a smb access restricted by the segment firewall.

Incorrect Answers

A:

Mail receiving on IMAP works while the configured submission service's TCP port is denied, consistent with a smtp submission path blocked.

B:

The approved server listens for RDP on TCP 3389 while the path policy only permits HTTPS, consistent with a remote desktop protocol port not permitted.

C:

Both UDP and TCP queries to port 53 fail while the resolver address itself responds to basic network probes, consistent with a dns transport blocked between clients and resolver.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests