McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 2

Question 10

A laptop received a new SSD and now displays no boot device; firmware sees the SSD but its storage mode is set to an incompatible controller setting. Which underlying component or configuration issue is most consistent with the evidence?

  1. Unstable memory compatibility under load
  2. Storage form factor and interface mismatch
  3. Exhausted battery capacity from aging
  4. Storage controller or boot-mode mismatch after drive service

Explanation

Correct Answer

D:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

Incorrect Answers

A:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

B:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

C:

Battery health reports severe capacity loss at normal temperature and charge cycles are high, consistent with an exhausted battery capacity from aging.

Question 11

During a support incident, After a RAM replacement, a laptop boots normally but crashes under memory pressure; the new module's timings differ from the certified configuration. What is the most likely technical explanation?

  1. Wi-Fi antenna pigtail trapped under the bezel
  2. Storage controller or boot-mode mismatch after drive service
  3. Unstable memory compatibility under load
  4. Storage form factor and interface mismatch

Explanation

Correct Answer

C:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

Incorrect Answers

A:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

B:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

D:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

Question 12

A rugged notebook loses Wi-Fi whenever the display bezel is tightened, but the signal returns when the bezel is loosened. Which failure mode should the technician prioritize?

  1. Pinched Wi-Fi antenna lead in the display hinge
  2. Unstable memory compatibility under load
  3. Storage form factor and interface mismatch
  4. Wi-Fi antenna pigtail trapped under the bezel

Explanation

Correct Answer

D:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

Incorrect Answers

A:

Signal strength changes sharply with lid angle while the adapter stays visible in the OS, consistent with a pinched wi-fi antenna lead in the display hinge.

B:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

C:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

Question 13

A help-desk ticket states: A serviceable laptop storage upgrade is requested, but the replacement SSD is a 2.5-inch SATA drive and the notebook has only an M.2 NVMe socket. Which diagnosis is best supported rather than simply possible?

  1. Storage form factor and interface mismatch
  2. Wi-Fi antenna pigtail trapped under the bezel
  3. Unstable memory compatibility under load
  4. Storage controller or boot-mode mismatch after drive service

Explanation

Correct Answer

A:

The service manual specifies an M.2 NVMe slot and no SATA drive bay, consistent with a storage form factor and interface mismatch.

Incorrect Answers

B:

Continuity testing and visual inspection find a compressed antenna cable beneath a mounting point, consistent with a wi-fi antenna pigtail trapped under the bezel.

C:

A sustained memory test produces reproducible errors with the replacement module but not the approved original, consistent with an unstable memory compatibility under load.

D:

Firmware lists the drive but the prior OS installation requires a different storage controller or boot configuration, consistent with a storage controller or boot-mode mismatch after drive service.

Question 14

When comparing several hypotheses, a technician observes: A tablet with USB-C can transfer files over a cheap cable, yet a portable monitor stays black despite working with its supplied cable. Which condition best fits?

  1. USB-C host adapter for a legacy USB-A peripheral
  2. Dock power delivery is insufficient for the laptop
  3. USB-C cable lacks required video alternate-mode capability
  4. Incompatible phone accessory connector standards

Explanation

Correct Answer

C:

The working cable is rated for DisplayPort alternate mode while the cheap cable supports only charging and basic data, consistent with an usb-c cable lacks required video alternate-mode capability.

Incorrect Answers

A:

The tablet supports USB OTG/host operation but has no native USB-A receptacle, consistent with an usb-c host adapter for a legacy usb-a peripheral.

B:

The dock advertises a lower Power Delivery wattage than the laptop's required charging input, consistent with a dock power delivery is insufficient for the laptop.

D:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

Question 15

A technician investigates this device problem: A contractor connects a laptop to a USB-C dock and gets peripherals but no charging even though the laptop charges directly through its adapter. Which diagnosis best explains the observed pattern?

  1. Multiport docking station with display support
  2. USB-C cable lacks required video alternate-mode capability
  3. Incompatible phone accessory connector standards
  4. Dock power delivery is insufficient for the laptop

Explanation

Correct Answer

D:

The dock advertises a lower Power Delivery wattage than the laptop's required charging input, consistent with a dock power delivery is insufficient for the laptop.

Incorrect Answers

A:

The dock exposes multiple display and peripheral ports and supplies the notebook's required power profile, consistent with a multiport docking station with display support.

B:

The working cable is rated for DisplayPort alternate mode while the cheap cable supports only charging and basic data, consistent with an usb-c cable lacks required video alternate-mode capability.

C:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

Question 16

A user has a Lightning-equipped older phone and a new USB-C headset that cannot plug into its port. Which underlying component or configuration issue is most consistent with the evidence?

  1. Bluetooth audio output profile not selected
  2. Dock power delivery is insufficient for the laptop
  3. Incompatible phone accessory connector standards
  4. USB-C cable lacks required video alternate-mode capability

Explanation

Correct Answer

C:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

Incorrect Answers

A:

The headset is paired and connected, but the call-audio routing menu still selects the handset speaker, consistent with a bluetooth audio output profile not selected.

B:

The dock advertises a lower Power Delivery wattage than the laptop's required charging input, consistent with a dock power delivery is insufficient for the laptop.

D:

The working cable is rated for DisplayPort alternate mode while the cheap cable supports only charging and basic data, consistent with an usb-c cable lacks required video alternate-mode capability.

Question 17

During a support incident, A wireless headset pairs to a phone but calls remain silent because audio is routed to the phone's internal speaker. What is the most likely technical explanation?

  1. Cellular hotspot or tethering from a mobile device
  2. Near-field communication for very short-range exchange
  3. Bluetooth audio output profile not selected
  4. Incompatible phone accessory connector standards

Explanation

Correct Answer

C:

The headset is paired and connected, but the call-audio routing menu still selects the handset speaker, consistent with a bluetooth audio output profile not selected.

Incorrect Answers

A:

The laptop receives a private address from the phone and traffic exits over the phone's cellular connection, consistent with a cellular hotspot or tethering from a mobile device.

B:

The transaction completes only when the device is brought within a few centimeters of the NFC reader, consistent with a near-field communication for very short-range exchange.

D:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

Question 18

A kiosk needs a customer's phone to exchange a small proximity token at a reader without creating a Wi-Fi link. Which failure mode should the technician prioritize?

  1. Cellular hotspot or tethering from a mobile device
  2. Bluetooth audio output profile not selected
  3. Near-field communication for very short-range exchange
  4. Incompatible phone accessory connector standards

Explanation

Correct Answer

C:

The transaction completes only when the device is brought within a few centimeters of the NFC reader, consistent with a near-field communication for very short-range exchange.

Incorrect Answers

A:

The laptop receives a private address from the phone and traffic exits over the phone's cellular connection, consistent with a cellular hotspot or tethering from a mobile device.

B:

The headset is paired and connected, but the call-audio routing menu still selects the handset speaker, consistent with a bluetooth audio output profile not selected.

D:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

Question 19

A help-desk ticket states: A field technician must provide Internet access to a laptop using a phone's mobile-data plan while no local Wi-Fi exists. Which diagnosis is best supported rather than simply possible?

  1. Incompatible phone accessory connector standards
  2. Cellular hotspot or tethering from a mobile device
  3. Bluetooth audio output profile not selected
  4. Near-field communication for very short-range exchange

Explanation

Correct Answer

B:

The laptop receives a private address from the phone and traffic exits over the phone's cellular connection, consistent with a cellular hotspot or tethering from a mobile device.

Incorrect Answers

A:

The phone has a Lightning receptacle while the headset terminates in USB-C, consistent with an incompatible phone accessory connector standards.

C:

The headset is paired and connected, but the call-audio routing menu still selects the handset speaker, consistent with a bluetooth audio output profile not selected.

D:

The transaction completes only when the device is brought within a few centimeters of the NFC reader, consistent with a near-field communication for very short-range exchange.

Question 20

When comparing several hypotheses, a technician observes: A home-office user wants two external displays, wired Ethernet, power and a keyboard through one laptop connection. Which condition best fits?

  1. Active stylus digitizer and pressure compatibility
  2. Dock power delivery is insufficient for the laptop
  3. Multiport docking station with display support
  4. Cellular hotspot or tethering from a mobile device

Explanation

Correct Answer

C:

The dock exposes multiple display and peripheral ports and supplies the notebook's required power profile, consistent with a multiport docking station with display support.

Incorrect Answers

A:

The manufacturer's pen supports pressure telemetry while the passive stylus simply simulates a finger tap, consistent with an active stylus digitizer and pressure compatibility.

B:

The dock advertises a lower Power Delivery wattage than the laptop's required charging input, consistent with a dock power delivery is insufficient for the laptop.

D:

The laptop receives a private address from the phone and traffic exits over the phone's cellular connection, consistent with a cellular hotspot or tethering from a mobile device.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests