McAfee Secured

Exam Code: 220-1201

Exam Name: CompTIA A+ Certification Exam: Core 1

Certification Provider: CompTIA

Corresponding Certification: CompTIA A+

100% CompTIA 220-1201 Guaranteed Success With Testking Training Materials

Get Real 220-1201 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

527 Questions & Answers with Testing Engine

"CompTIA A+ Certification Exam: Core 1 Exam", also known as 220-1201 exam, is a CompTIA certification exam.

Pass your tests with the always up-to-date 220-1201 Exam Engine. Your 220-1201 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

CompTIA 220-1201 Practice Test 19

Question 180

During a support incident, A workstation receives an IPv6 link-local address beginning with fe80:: but cannot reach a global IPv6 service because no router advertisements are present. What is the most likely technical explanation?

  1. Private IPv4 addressing for a SOHO device
  2. Incorrect default gateway on clients
  3. Incorrect IPv4 subnet mask
  4. Missing IPv6 default route or global prefix assignment

Explanation

Correct Answer

D:

The host has only link-local addressing and no learned global prefix or default IPv6 router, consistent with a missing ipv6 default route or global prefix assignment.

Incorrect Answers

A:

The approved LAN plan uses RFC1918 private ranges such as 192.168.10.0/24, consistent with a private ipv4 addressing for a soho device.

B:

The clients have valid local subnet addresses but their configured gateway is outside or no longer serves that subnet, consistent with an incorrect default gateway on clients.

C:

The device tries ARP for remote hosts it incorrectly considers local rather than using the gateway, consistent with an incorrect ipv4 subnet mask.

Question 181

A remote observatory experiences large round-trip times despite acceptable download throughput over its geostationary link. Which failure mode should the technician prioritize?

  1. Fixed wireless ISP link
  2. DSL distance-sensitive access
  3. Satellite latency from long signal path
  4. Fiber internet access characteristics

Explanation

Correct Answer

C:

Latency remains high under light load and the ISP uses geostationary satellites, consistent with a satellite latency from long signal path.

Incorrect Answers

A:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

B:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

D:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

Question 182

A help-desk ticket states: A new office has access to symmetrical high-speed service over optical cable and needs stable video uploads. Which diagnosis is best supported rather than simply possible?

  1. Fiber internet access characteristics
  2. Fixed wireless ISP link
  3. Satellite latency from long signal path
  4. DSL distance-sensitive access

Explanation

Correct Answer

A:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

Incorrect Answers

B:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

C:

Latency remains high under light load and the ISP uses geostationary satellites, consistent with a satellite latency from long signal path.

D:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

Question 183

When comparing several hypotheses, a technician observes: An older neighborhood uses a broadband service whose speed decreases with distance from the telephone exchange over twisted-pair wiring. Which condition best fits?

  1. Fiber internet access characteristics
  2. Fixed wireless ISP link
  3. Satellite latency from long signal path
  4. DSL distance-sensitive access

Explanation

Correct Answer

D:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

Incorrect Answers

A:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

B:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

C:

Latency remains high under light load and the ISP uses geostationary satellites, consistent with a satellite latency from long signal path.

Question 184

A technician investigates this device problem: A technician connects an isolated virtual-storage network carrying block-level data between servers and disk arrays. Which diagnosis best explains the observed pattern?

  1. DSL distance-sensitive access
  2. Storage area network for block storage
  3. Fiber internet access characteristics
  4. Fixed wireless ISP link

Explanation

Correct Answer

B:

Servers see logical storage volumes over dedicated storage transport rather than ordinary file shares, consistent with a storage area network for block storage.

Incorrect Answers

A:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

C:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

D:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

Question 185

A rural business gets broadband from a fixed antenna aimed at a provider tower, not from cellular phone service. Which underlying component or configuration issue is most consistent with the evidence?

  1. Fixed wireless ISP link
  2. DSL distance-sensitive access
  3. Fiber internet access characteristics
  4. Storage area network for block storage

Explanation

Correct Answer

A:

The site's external customer-premises antenna aligns with the provider's point-to-multipoint tower, consistent with a fixed wireless isp link.

Incorrect Answers

B:

A line test reports copper attenuation and the service uses telephone pairs rather than fiber, consistent with a dsl distance-sensitive access.

C:

The provider delivers optical service with comparable upload and download rates and low local-loop interference, consistent with a fiber internet access characteristics.

D:

Servers see logical storage volumes over dedicated storage transport rather than ordinary file shares, consistent with a storage area network for block storage.

Question 186

During a support incident, A technician must locate which unmarked office wall jack terminates in a crowded wiring closet without generating normal network traffic. What is the most likely technical explanation?

  1. Wi-Fi analyzer for radio channel survey
  2. Tone generator and probe tracing
  3. Copper cable tester for wiremap faults
  4. Punchdown tool termination

Explanation

Correct Answer

B:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

Incorrect Answers

A:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

C:

A pair-level tester reports an open or incorrect pin mapping in the terminated cable, consistent with a copper cable tester for wiremap faults.

D:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Question 187

A new patch cable has intermittent connectivity and the technician suspects crossed conductors or an open pair. Which failure mode should the technician prioritize?

  1. Tone generator and probe tracing
  2. Wi-Fi analyzer for radio channel survey
  3. Punchdown tool termination
  4. Copper cable tester for wiremap faults

Explanation

Correct Answer

D:

A pair-level tester reports an open or incorrect pin mapping in the terminated cable, consistent with a copper cable tester for wiremap faults.

Incorrect Answers

A:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

B:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

C:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Question 188

A help-desk ticket states: An office reports poor wireless performance and needs to identify nearby SSIDs and the channels they occupy. Which diagnosis is best supported rather than simply possible?

  1. Wi-Fi analyzer for radio channel survey
  2. Network tap for observation
  3. Tone generator and probe tracing
  4. Punchdown tool termination

Explanation

Correct Answer

A:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

Incorrect Answers

B:

A compatible tap delivers packet copies to a monitor port without relying on the endpoint OS, consistent with a network tap for observation.

C:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

D:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Question 189

When comparing several hypotheses, a technician observes: A technician has to attach individual solid copper conductor pairs to a wall-mounted keystone jack. Which condition best fits?

  1. Punchdown tool termination
  2. Tone generator and probe tracing
  3. Wi-Fi analyzer for radio channel survey
  4. Copper cable tester for wiremap faults

Explanation

Correct Answer

A:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

Incorrect Answers

B:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

C:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

D:

A pair-level tester reports an open or incorrect pin mapping in the terminated cable, consistent with a copper cable tester for wiremap faults.

Question 190

A technician investigates this device problem: A switched network is unexpectedly retransmitting packets, and the support team needs a passive copy of traffic for an authorized monitoring sensor. Which diagnosis best explains the observed pattern?

  1. Network tap for observation
  2. Wi-Fi analyzer for radio channel survey
  3. Tone generator and probe tracing
  4. Punchdown tool termination

Explanation

Correct Answer

A:

A compatible tap delivers packet copies to a monitor port without relying on the endpoint OS, consistent with a network tap for observation.

Incorrect Answers

B:

A Wi-Fi survey tool reports signal levels, channel widths and overlapping access-point networks, consistent with a wi-fi analyzer for radio channel survey.

C:

A tone injected into the disconnected cable is detected at one matching panel termination, consistent with a tone generator and probe tracing.

D:

The keystone uses insulation-displacement contacts requiring properly seated and trimmed conductors, consistent with a punchdown tool termination.

CompTIA A+ Certification Exam: Core 1 (220-1201) Practice Tests